On 9.03.2023 10:19, Neil Armstrong wrote:
> The first QMP PHY is an USB3/DP combo phy, switch to the newly
> documented bindings and register the clocks to the GCC
> and DISPCC controllers.
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> #SM8350-HDK
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 42 +++++++++++++-----------------------
> 1 file changed, 15 insertions(+), 27 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 1c97e28da6ad..94e85313f15d 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -13,6 +13,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interconnect/qcom,sm8350.h>
> #include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/phy/phy-qcom-qmp.h>
> #include <dt-bindings/power/qcom-rpmpd.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> #include <dt-bindings/thermal/thermal.h>
> @@ -653,7 +654,7 @@ gcc: clock-controller@100000 {
> <&ufs_mem_phy_lanes 0>,
> <&ufs_mem_phy_lanes 1>,
> <&ufs_mem_phy_lanes 2>,
> - <0>,
> + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
> <0>;
> };
>
> @@ -2125,37 +2126,24 @@ usb_2_hsphy: phy@88e4000 {
> resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
> };
>
> - usb_1_qmpphy: phy-wrapper@88e9000 {
> - compatible = "qcom,sm8350-qmp-usb3-phy";
> - reg = <0 0x088e9000 0 0x200>,
> - <0 0x088e8000 0 0x20>;
> - status = "disabled";
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> + usb_1_qmpphy: phy@88e9000 {
> + compatible = "qcom,sm8350-qmp-usb3-dp-phy";
> + reg = <0 0x088e8000 0 0x3000>;
>
> clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
> <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> - clock-names = "aux", "ref_clk_src", "com_aux";
> + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> + clock-names = "aux", "ref", "com_aux", "usb3_pipe";
>
> resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
> <&gcc GCC_USB3_PHY_PRIM_BCR>;
> reset-names = "phy", "common";
>
> - usb_1_ssphy: phy@88e9200 {
> - reg = <0 0x088e9200 0 0x200>,
> - <0 0x088e9400 0 0x200>,
> - <0 0x088e9c00 0 0x400>,
> - <0 0x088e9600 0 0x200>,
> - <0 0x088e9800 0 0x200>,
> - <0 0x088e9a00 0 0x100>;
> - #phy-cells = <0>;
> - #clock-cells = <0>;
> - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> - clock-names = "pipe0";
> - clock-output-names = "usb3_phy_pipe_clk_src";
> - };
> + #clock-cells = <1>;
> + #phy-cells = <1>;
> +
> + status = "disabled";
> };
>
> usb_2_qmpphy: phy-wrapper@88eb000 {
> @@ -2258,7 +2246,7 @@ usb_1_dwc3: usb@a600000 {
> iommus = <&apps_smmu 0x0 0x0>;
> snps,dis_u2_susphy_quirk;
> snps,dis_enblslpm_quirk;
> - phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
> + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
> phy-names = "usb2-phy", "usb3-phy";
> };
> };
> @@ -2623,8 +2611,8 @@ dispcc: clock-controller@af00000 {
> clocks = <&rpmhcc RPMH_CXO_CLK>,
> <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
> <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
> - <0>,
> - <0>;
> + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
> + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
> clock-names = "bi_tcxo",
> "dsi0_phy_pll_out_byteclk",
> "dsi0_phy_pll_out_dsiclk",
>
