Remove dpu_hw_fmt_layout instance from struct dpu_hw_sspp_cfg, leaving
only src_rect and dst_rect. This way all the pipes used by the plane
will have a common layout instance (as the framebuffer is shared between
them), while still keeping a separate src/dst rectangle configuration
for each pipe.
Reviewed-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c | 32 ++++++++++-----------
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h | 6 ++--
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 10 +++----
3 files changed, 23 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
index ab95f2817378..e87c6377f315 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
@@ -490,7 +490,7 @@ static void dpu_hw_sspp_setup_rects(struct dpu_sw_pipe *pipe,
}
static void dpu_hw_sspp_setup_sourceaddress(struct dpu_sw_pipe *pipe,
- struct dpu_hw_sspp_cfg *cfg)
+ struct dpu_hw_fmt_layout *layout)
{
struct dpu_hw_sspp *ctx = pipe->sspp;
u32 ystride0, ystride1;
@@ -501,41 +501,41 @@ static void dpu_hw_sspp_setup_sourceaddress(struct dpu_sw_pipe *pipe,
return;
if (pipe->multirect_index == DPU_SSPP_RECT_SOLO) {
- for (i = 0; i < ARRAY_SIZE(cfg->layout.plane_addr); i++)
+ for (i = 0; i < ARRAY_SIZE(layout->plane_addr); i++)
DPU_REG_WRITE(&ctx->hw, SSPP_SRC0_ADDR + idx + i * 0x4,
- cfg->layout.plane_addr[i]);
+ layout->plane_addr[i]);
} else if (pipe->multirect_index == DPU_SSPP_RECT_0) {
DPU_REG_WRITE(&ctx->hw, SSPP_SRC0_ADDR + idx,
- cfg->layout.plane_addr[0]);
+ layout->plane_addr[0]);
DPU_REG_WRITE(&ctx->hw, SSPP_SRC2_ADDR + idx,
- cfg->layout.plane_addr[2]);
+ layout->plane_addr[2]);
} else {
DPU_REG_WRITE(&ctx->hw, SSPP_SRC1_ADDR + idx,
- cfg->layout.plane_addr[0]);
+ layout->plane_addr[0]);
DPU_REG_WRITE(&ctx->hw, SSPP_SRC3_ADDR + idx,
- cfg->layout.plane_addr[2]);
+ layout->plane_addr[2]);
}
if (pipe->multirect_index == DPU_SSPP_RECT_SOLO) {
- ystride0 = (cfg->layout.plane_pitch[0]) |
- (cfg->layout.plane_pitch[1] << 16);
- ystride1 = (cfg->layout.plane_pitch[2]) |
- (cfg->layout.plane_pitch[3] << 16);
+ ystride0 = (layout->plane_pitch[0]) |
+ (layout->plane_pitch[1] << 16);
+ ystride1 = (layout->plane_pitch[2]) |
+ (layout->plane_pitch[3] << 16);
} else {
ystride0 = DPU_REG_READ(&ctx->hw, SSPP_SRC_YSTRIDE0 + idx);
ystride1 = DPU_REG_READ(&ctx->hw, SSPP_SRC_YSTRIDE1 + idx);
if (pipe->multirect_index == DPU_SSPP_RECT_0) {
ystride0 = (ystride0 & 0xFFFF0000) |
- (cfg->layout.plane_pitch[0] & 0x0000FFFF);
+ (layout->plane_pitch[0] & 0x0000FFFF);
ystride1 = (ystride1 & 0xFFFF0000)|
- (cfg->layout.plane_pitch[2] & 0x0000FFFF);
+ (layout->plane_pitch[2] & 0x0000FFFF);
} else {
ystride0 = (ystride0 & 0x0000FFFF) |
- ((cfg->layout.plane_pitch[0] << 16) &
+ ((layout->plane_pitch[0] << 16) &
0xFFFF0000);
ystride1 = (ystride1 & 0x0000FFFF) |
- ((cfg->layout.plane_pitch[2] << 16) &
+ ((layout->plane_pitch[2] << 16) &
0xFFFF0000);
}
}
@@ -564,7 +564,7 @@ static void dpu_hw_sspp_setup_csc(struct dpu_hw_sspp *ctx,
static void dpu_hw_sspp_setup_solidfill(struct dpu_sw_pipe *pipe, u32 color)
{
struct dpu_hw_sspp *ctx = pipe->sspp;
- struct dpu_hw_sspp_cfg cfg;
+ struct dpu_hw_fmt_layout cfg;
u32 idx;
if (_sspp_subblk_offset(ctx, DPU_SSPP_SRC, &idx))
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
index 136b8713943f..100d8e06c90d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
@@ -154,13 +154,11 @@ struct dpu_hw_pixel_ext {
/**
* struct dpu_hw_sspp_cfg : SSPP configuration
- * @layout: format layout information for programming buffer to hardware
* @src_rect: src ROI, caller takes into account the different operations
* such as decimation, flip etc to program this field
* @dest_rect: destination ROI.
*/
struct dpu_hw_sspp_cfg {
- struct dpu_hw_fmt_layout layout;
struct drm_rect src_rect;
struct drm_rect dst_rect;
};
@@ -243,10 +241,10 @@ struct dpu_hw_sspp_ops {
/**
* setup_sourceaddress - setup pipe source addresses
* @pipe: Pointer to software pipe context
- * @cfg: Pointer to pipe config structure
+ * @layout: format layout information for programming buffer to hardware
*/
void (*setup_sourceaddress)(struct dpu_sw_pipe *ctx,
- struct dpu_hw_sspp_cfg *cfg);
+ struct dpu_hw_fmt_layout *layout);
/**
* setup_csc - setup color space coversion
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 8c98385303ea..4ae70d21c37a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -471,21 +471,21 @@ static void _dpu_plane_set_qos_remap(struct drm_plane *plane)
static void _dpu_plane_set_scanout(struct drm_plane *plane,
struct dpu_plane_state *pstate,
- struct dpu_hw_sspp_cfg *pipe_cfg,
struct drm_framebuffer *fb)
{
struct dpu_plane *pdpu = to_dpu_plane(plane);
struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
struct msm_gem_address_space *aspace = kms->base.aspace;
+ struct dpu_hw_fmt_layout layout;
int ret;
- ret = dpu_format_populate_layout(aspace, fb, &pipe_cfg->layout);
+ ret = dpu_format_populate_layout(aspace, fb, &layout);
if (ret)
DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
else if (pstate->pipe.sspp->ops.setup_sourceaddress) {
trace_dpu_plane_set_scanout(&pstate->pipe,
- &pipe_cfg->layout);
- pstate->pipe.sspp->ops.setup_sourceaddress(&pstate->pipe, pipe_cfg);
+ &layout);
+ pstate->pipe.sspp->ops.setup_sourceaddress(&pstate->pipe, &layout);
}
}
@@ -1134,7 +1134,7 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
memset(&pipe_cfg, 0, sizeof(struct dpu_hw_sspp_cfg));
- _dpu_plane_set_scanout(plane, pstate, &pipe_cfg, fb);
+ _dpu_plane_set_scanout(plane, pstate, fb);
pstate->pending = true;
--
2.39.2
