Novatek NT36523 is a display driver IC used to drive DSI panels. Signed-off-by: Jianhua Lu <lujianhua000@xxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Changes in v3: - pick up Krzysztof's R-b Changes in v2: - Drop unnecessary description - dsi0 -> dsi - Correct indentation .../display/panel/novatek,nt36523.yaml | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml new file mode 100644 index 000000000000..0039561ef04c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt36523.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT36523 based DSI display Panels + +maintainers: + - Jianhua Lu <lujianhua000@xxxxxxxxx> + +description: | + The Novatek NT36523 is a generic DSI Panel IC used to drive dsi + panels. Support video mode panels from China Star Optoelectronics + Technology (CSOT) and BOE Technology. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - xiaomi,elish-boe-nt36523 + - xiaomi,elish-csot-nt36523 + - const: novatek,nt36523 + + reset-gpios: + maxItems: 1 + description: phandle of gpio for reset line - This should be 8mA + + vddio-supply: + description: regulator that supplies the I/O voltage + + reg: true + ports: true + backlight: true + +required: + - compatible + - reg + - vddio-supply + - reset-gpios + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1{ + reg = <1>; + panel_in_1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; + +... -- 2.39.2
