RE: [RFC PATCH 1/2] drm/msm/dp: enumerate edp panel during driver probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>>
>> The eDP panel is identified and enumerated during probe of the
>> panel-edp driver. The current DP driver triggers this panel-edp driver
>> probe while getting the panel-bridge associated with the eDP panel
>> from the platform driver bind. If the panel-edp probe is deferred,
>> then the whole bunch of MDSS parent and child drivers have to defer and
>roll back.
>
>No, MDSS has not been rolled back since 5.19. Please shift your development
>on top of the current msm-next.
>

Okay, I will move to the msm-next tip.

>>
>> So, we want to move the panel enumeration from bind to probe so that
>> the probe defer is easier to handle and also both the drivers appear
>> consistent in panel enumeration. This change moves the DP driver
>> panel-bridge enumeration to probe.
>>
>> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@xxxxxxxxxxx>
>> ---
>>  drivers/gpu/drm/msm/dp/dp_aux.c     | 149
>++++++++++++++++++++++++++--
>>  drivers/gpu/drm/msm/dp/dp_catalog.c |  12 +++
>>  drivers/gpu/drm/msm/dp/dp_catalog.h |   1 +
>>  drivers/gpu/drm/msm/dp/dp_display.c |  80 ++++++---------
>>  4 files changed, 182 insertions(+), 60 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c
>> b/drivers/gpu/drm/msm/dp/dp_aux.c index cc3efed593aa..5da95dfdeede
>> 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
>> @@ -110,7 +110,7 @@ static ssize_t dp_aux_write(struct dp_aux_private
>> *aux,  }
>>
>>  static ssize_t dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
>> -                             struct drm_dp_aux_msg *msg)
>> +                             struct drm_dp_aux_msg *msg, bool poll)
>
>What is the reason for working in polled mode rather than always using the
>interrupts?
>

The mdss interrupts will be enabled and can be used after msm_irq_install from msm_drm_bind.
We want to perform aux transactions during probe. The aux data transmission is followed by an
interrupt to indicate successful transmission status and reply information.

As interrupts are not enabled, I took this polling approach for aux interrupts during probe.

>>  {
>>         ssize_t ret;
>>         unsigned long time_left;
>> @@ -121,10 +121,16 @@ static ssize_t dp_aux_cmd_fifo_tx(struct
>dp_aux_private *aux,
>>         if (ret < 0)
>>                 return ret;
>>
>> -       time_left = wait_for_completion_timeout(&aux->comp,
>> +       if (!poll) {
>> +               time_left = wait_for_completion_timeout(&aux->comp,
>>                                                 msecs_to_jiffies(250));
>> -       if (!time_left)
>> -               return -ETIMEDOUT;
>> +               if (!time_left)
>> +                       return -ETIMEDOUT;
>> +       } else {
>> +               ret = dp_catalog_aux_poll_and_get_hw_interrupt(aux->catalog);
>> +               if (!ret)
>> +                       dp_aux_isr(&aux->dp_aux);
>> +       }
>>
>>         return ret;
>>  }
>> @@ -238,7 +244,7 @@ static void
>dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
>>   */
>>  static void dp_aux_transfer_helper(struct dp_aux_private *aux,
>>                                    struct drm_dp_aux_msg *input_msg,
>> -                                  bool send_seg)
>> +                                  bool send_seg, bool poll)
>>  {
>>         struct drm_dp_aux_msg helper_msg;
>>         u32 message_size = 0x10;
>> @@ -278,7 +284,7 @@ static void dp_aux_transfer_helper(struct
>dp_aux_private *aux,
>>                 helper_msg.address = segment_address;
>>                 helper_msg.buffer = &aux->segment;
>>                 helper_msg.size = 1;
>> -               dp_aux_cmd_fifo_tx(aux, &helper_msg);
>> +               dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
>>         }
>>
>>         /*
>> @@ -292,7 +298,7 @@ static void dp_aux_transfer_helper(struct
>dp_aux_private *aux,
>>         helper_msg.address = input_msg->address;
>>         helper_msg.buffer = &aux->offset;
>>         helper_msg.size = 1;
>> -       dp_aux_cmd_fifo_tx(aux, &helper_msg);
>> +       dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
>>
>>  end:
>>         aux->offset += message_size;
>> @@ -300,6 +306,122 @@ static void dp_aux_transfer_helper(struct
>dp_aux_private *aux,
>>                 aux->segment = 0x0; /* reset segment at end of block
>> */  }
>>
>> +/*
>> + * This function does the real job to process an AUX transaction.
>> + * It will call aux_reset() function to reset the AUX channel,
>> + * if the waiting is timeout.
>> + */
>> +static ssize_t dp_aux_transfer_init(struct drm_dp_aux *dp_aux,
>> +                              struct drm_dp_aux_msg *msg) {
>> +       ssize_t ret;
>> +       int const aux_cmd_native_max = 16;
>> +       int const aux_cmd_i2c_max = 128;
>> +       struct dp_aux_private *aux;
>> +
>> +       aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +       aux->native = msg->request & (DP_AUX_NATIVE_WRITE &
>> + DP_AUX_NATIVE_READ);
>> +
>> +       /* Ignore address only message */
>> +       if (msg->size == 0 || !msg->buffer) {
>> +               msg->reply = aux->native ?
>> +                       DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
>> +               return msg->size;
>> +       }
>> +
>> +       /* msg sanity check */
>> +       if ((aux->native && msg->size > aux_cmd_native_max) ||
>> +           msg->size > aux_cmd_i2c_max) {
>> +               DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
>> +                       __func__, msg->size, msg->request);
>> +               return -EINVAL;
>> +       }
>> +
>> +       mutex_lock(&aux->mutex);
>> +       if (!aux->initted) {
>> +               ret = -EIO;
>> +               goto exit;
>> +       }
>> +
>> +       /*
>> +        * For eDP it's important to give a reasonably long wait here for HPD
>> +        * to be asserted. This is because the panel driver may have _just_
>> +        * turned on the panel and then tried to do an AUX transfer. The panel
>> +        * driver has no way of knowing when the panel is ready, so it's up
>> +        * to us to wait. For DP we never get into this situation so let's
>> +        * avoid ever doing the extra long wait for DP.
>> +        */
>> +       if (aux->is_edp) {
>> +               ret = dp_catalog_aux_wait_for_hpd_connect_state(aux->catalog);
>> +               if (ret) {
>> +                       DRM_DEBUG_DP("Panel not ready for aux transactions\n");
>> +                       goto exit;
>> +               }
>> +       }
>> +
>> +       dp_aux_update_offset_and_segment(aux, msg);
>> +       dp_aux_transfer_helper(aux, msg, true, true);
>> +
>> +       aux->read = msg->request & (DP_AUX_I2C_READ &
>DP_AUX_NATIVE_READ);
>> +       aux->cmd_busy = true;
>> +
>> +       if (aux->read) {
>> +               aux->no_send_addr = true;
>> +               aux->no_send_stop = false;
>> +       } else {
>> +               aux->no_send_addr = true;
>> +               aux->no_send_stop = true;
>> +       }
>> +
>> +       ret = dp_aux_cmd_fifo_tx(aux, msg, true);
>> +
>> +       /* TODO: why is fifo_rx necessary here?
>> +        * Ideally fifo_rx need not be executed for an aux write
>> +        */
>> +       ret = dp_aux_cmd_fifo_rx(aux, msg);
>> +
>> +       if (ret < 0) {
>> +               if (aux->native) {
>> +                       aux->retry_cnt++;
>> +                       if (!(aux->retry_cnt % MAX_AUX_RETRIES))
>> +                               dp_catalog_aux_update_cfg(aux->catalog);
>> +               }
>> +               /* reset aux if link is in connected state */
>> +               if (dp_catalog_link_is_connected(aux->catalog))
>> +                       dp_catalog_aux_reset(aux->catalog);
>> +       } else {
>> +               aux->retry_cnt = 0;
>> +               switch (aux->aux_error_num) {
>> +               case DP_AUX_ERR_NONE:
>> +                       if (aux->read)
>> +                               ret = dp_aux_cmd_fifo_rx(aux, msg);
>> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_ACK :
>DP_AUX_I2C_REPLY_ACK;
>> +                       break;
>> +               case DP_AUX_ERR_DEFER:
>> +                       msg->reply = aux->native ?
>> +                               DP_AUX_NATIVE_REPLY_DEFER :
>DP_AUX_I2C_REPLY_DEFER;
>> +                       break;
>> +               case DP_AUX_ERR_PHY:
>> +               case DP_AUX_ERR_ADDR:
>> +               case DP_AUX_ERR_NACK:
>> +               case DP_AUX_ERR_NACK_DEFER:
>> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_NACK :
>DP_AUX_I2C_REPLY_NACK;
>> +                       break;
>> +               case DP_AUX_ERR_TOUT:
>> +                       ret = -ETIMEDOUT;
>> +                       break;
>> +               }
>> +       }
>> +
>> +       aux->cmd_busy = false;
>> +
>> +exit:
>> +       mutex_unlock(&aux->mutex);
>> +
>> +       return ret;
>> +}
>> +
>>  /*
>>   * This function does the real job to process an AUX transaction.
>>   * It will call aux_reset() function to reset the AUX channel, @@
>> -355,7 +477,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
>*dp_aux,
>>         }
>>
>>         dp_aux_update_offset_and_segment(aux, msg);
>> -       dp_aux_transfer_helper(aux, msg, true);
>> +       dp_aux_transfer_helper(aux, msg, true, false);
>>
>>         aux->read = msg->request & (DP_AUX_I2C_READ &
>DP_AUX_NATIVE_READ);
>>         aux->cmd_busy = true;
>> @@ -368,7 +490,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
>*dp_aux,
>>                 aux->no_send_stop = true;
>>         }
>>
>> -       ret = dp_aux_cmd_fifo_tx(aux, msg);
>> +       ret = dp_aux_cmd_fifo_tx(aux, msg, false);
>>         if (ret < 0) {
>>                 if (aux->native) {
>>                         aux->retry_cnt++; @@ -535,6 +657,15 @@ struct
>> drm_dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
>>         aux->catalog = catalog;
>>         aux->retry_cnt = 0;
>>
>> +       /*
>> +        * Use the drm_dp_aux_init() to use the aux adapter
>> +        * before registering aux with the DRM device.
>> +        */
>> +       aux->dp_aux.name = "dpu_dp_aux";
>> +       aux->dp_aux.dev = dev;
>> +       aux->dp_aux.transfer = dp_aux_transfer_init;
>> +       drm_dp_aux_init(&aux->dp_aux);
>
>How do you use the aux adapter? It should not be used before
>aux->drm_dev is setup.
>

The drm_dev registration happens during the bind. But we need to use aux during probe.

The kernel doc for the drm_dp_aux_init function suggested we can use the adapter before
drm_dev registration. So, I used this function to enable the aux usage during probe.

/**
 * drm_dp_aux_init() - minimally initialise an aux channel
 * @aux: DisplayPort AUX channel
 *
 * If you need to use the drm_dp_aux's i2c adapter prior to registering it with
 * the outside world, call drm_dp_aux_init() first.

>> +
>>         return &aux->dp_aux;
>>  }
>>
>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c
>> b/drivers/gpu/drm/msm/dp/dp_catalog.c
>> index 676279d0ca8d..ccf0400176f0 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
>> @@ -258,6 +258,18 @@ int
>dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
>*dp_catalog)
>>                                 2000, 500000);  }
>>
>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
>> +*dp_catalog) {
>> +       u32 aux;
>> +       struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +                               struct dp_catalog_private,
>> +dp_catalog);
>> +
>> +       return readl_poll_timeout(catalog->io->dp_controller.ahb.base +
>> +                               REG_DP_INTR_STATUS,
>> +                               aux, aux & DP_INTERRUPT_STATUS1,
>> +                               250, 250000); }
>> +
>>  static void dump_regs(void __iomem *base, int len)  {
>>         int i;
>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h
>> b/drivers/gpu/drm/msm/dp/dp_catalog.h
>> index 1f717f45c115..ad4a9e0f71f2 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.h
>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
>> @@ -87,6 +87,7 @@ void dp_catalog_aux_enable(struct dp_catalog
>> *dp_catalog, bool enable);  void dp_catalog_aux_update_cfg(struct
>> dp_catalog *dp_catalog);  int
>> dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
>> *dp_catalog);
>>  u32 dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
>> +*dp_catalog);
>>
>>  /* DP Controller APIs */
>>  void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
>> state); diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
>> b/drivers/gpu/drm/msm/dp/dp_display.c
>> index bde1a7ce442f..a5dcef040b74 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>> @@ -275,13 +275,6 @@ static int dp_display_bind(struct device *dev, struct
>device *master,
>>         dp->dp_display.drm_dev = drm;
>>         priv->dp[dp->id] = &dp->dp_display;
>>
>> -       rc = dp->parser->parse(dp->parser);
>> -       if (rc) {
>> -               DRM_ERROR("device tree parsing failed\n");
>> -               goto end;
>> -       }
>> -
>> -
>>         dp->drm_dev = drm;
>>         dp->aux->drm_dev = drm;
>>         rc = dp_aux_register(dp->aux); @@ -290,12 +283,6 @@ static int
>> dp_display_bind(struct device *dev, struct device *master,
>>                 goto end;
>>         }
>>
>> -       rc = dp_power_client_init(dp->power);
>> -       if (rc) {
>> -               DRM_ERROR("Power client create failed\n");
>> -               goto end;
>> -       }
>> -
>>         rc = dp_register_audio_driver(dev, dp->audio);
>>         if (rc) {
>>                 DRM_ERROR("Audio registration Dp failed\n"); @@ -787,6
>> +774,12 @@ static int dp_init_sub_modules(struct dp_display_private *dp)
>>                 goto error;
>>         }
>>
>> +       rc = dp->parser->parse(dp->parser);
>> +       if (rc) {
>> +               DRM_ERROR("device tree parsing failed\n");
>> +               goto error;
>> +       }
>> +
>>         dp->catalog = dp_catalog_get(dev, &dp->parser->io);
>>         if (IS_ERR(dp->catalog)) {
>>                 rc = PTR_ERR(dp->catalog); @@ -803,6 +796,12 @@ static
>> int dp_init_sub_modules(struct dp_display_private *dp)
>>                 goto error;
>>         }
>>
>> +       rc = dp_power_client_init(dp->power);
>> +       if (rc) {
>> +               DRM_ERROR("Power client create failed\n");
>> +               goto error;
>> +       }
>> +
>>         dp->aux = dp_aux_get(dev, dp->catalog, dp->dp_display.is_edp);
>>         if (IS_ERR(dp->aux)) {
>>                 rc = PTR_ERR(dp->aux); @@ -1338,12 +1337,29 @@ static
>> int dp_display_probe(struct platform_device *pdev)
>>
>>         platform_set_drvdata(pdev, &dp->dp_display);
>>
>> +       if (dp->dp_display.is_edp) {
>> +               dp_display_host_init(dp);
>> +               dp_display_host_phy_init(dp);
>> +               dp_catalog_ctrl_hpd_config(dp->catalog);
>> +
>> +               rc = devm_of_dp_aux_populate_bus(dp->aux, NULL);
>
>You should pass a real done_probing handler here, if you are going to refactor
>this piece of code. The done_probing should then shut down the resources
>and bind the component.
>

I removed the resource enabling part from probe in the next patch where I implemented pm_runtime_ops.
I moved the host_init, phy_init and hpd_config into runtime_resume and calling pm_runtime_get_sync from aux_transfer.

>> +
>> +               dp_display_host_phy_exit(dp);
>> +               dp_display_host_deinit(dp);
>> +
>> +               if (rc) {
>> +                       DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
>> +                       goto error;
>> +               }
>> +       }
>> +
>>         rc = component_add(&pdev->dev, &dp_display_comp_ops);
>>         if (rc) {
>>                 DRM_ERROR("component add failed, rc=%d\n", rc);
>>                 dp_display_deinit_sub_modules(dp);
>>         }
>>
>> +error:
>>         return rc;
>>  }
>>
>> @@ -1546,40 +1562,8 @@ static int dp_display_get_next_bridge(struct
>> msm_dp *dp)  {
>>         int rc;
>>         struct dp_display_private *dp_priv;
>> -       struct device_node *aux_bus;
>> -       struct device *dev;
>>
>>         dp_priv = container_of(dp, struct dp_display_private, dp_display);
>> -       dev = &dp_priv->pdev->dev;
>> -       aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
>> -
>> -       if (aux_bus && dp->is_edp) {
>> -               dp_display_host_init(dp_priv);
>> -               dp_catalog_ctrl_hpd_config(dp_priv->catalog);
>> -               dp_display_host_phy_init(dp_priv);
>> -               enable_irq(dp_priv->irq);
>> -
>> -               /*
>> -                * The code below assumes that the panel will finish probing
>> -                * by the time devm_of_dp_aux_populate_ep_devices() returns.
>> -                * This isn't a great assumption since it will fail if the
>> -                * panel driver is probed asynchronously but is the best we
>> -                * can do without a bigger driver reorganization.
>> -                */
>> -               rc = of_dp_aux_populate_bus(dp_priv->aux, NULL);
>> -               of_node_put(aux_bus);
>> -               if (rc)
>> -                       goto error;
>> -
>> -               rc = devm_add_action_or_reset(dp->drm_dev->dev,
>> -                                               of_dp_aux_depopulate_bus_void,
>> -                                               dp_priv->aux);
>> -               if (rc)
>> -                       goto error;
>> -       } else if (dp->is_edp) {
>> -               DRM_ERROR("eDP aux_bus not found\n");
>> -               return -ENODEV;
>> -       }
>>
>>         /*
>>          * External bridges are mandatory for eDP interfaces: one has
>> to @@ -1597,12 +1581,6 @@ static int dp_display_get_next_bridge(struct
>msm_dp *dp)
>>                 return 0;
>>         }
>>
>> -error:
>> -       if (dp->is_edp) {
>> -               disable_irq(dp_priv->irq);
>> -               dp_display_host_phy_exit(dp_priv);
>> -               dp_display_host_deinit(dp_priv);
>> -       }
>>         return rc;
>>  }
>>
>> --
>> 2.39.0
>>
>
>
>--
>With best wishes
>Dmitry




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux