Re: [PATCH v12 03/10] drm/display: Add Type-C switch helpers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 21, 2023 at 05:50:47PM +0800, Pin-yen Lin wrote:
> Add helpers to register and unregister Type-C "switches" for bridges
> capable of switching their output between two downstream devices.
> 
> The helper registers USB Type-C mode switches when the "mode-switch"
> and the "reg" properties are available in Device Tree.
> 
> Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx>

...

> +	fwnode_for_each_typec_mode_switch(port, sw)
> +		switch_desc->num_typec_switches++;
> +
> +	if (!switch_desc->num_typec_switches) {
> +		dev_dbg(dev, "No Type-C switches node found\n");
> +		return 0;
> +	}

What about

static inline unsigned int typec_mode_switch_node_count(... *port)
{
	... *sw;
	unsigned int count = 0;

	for_each_typec_mode_switch_node(port, sw)
		count++;

	return count;
}


And then it seems something like

	unsigned int count;

	count = typec_mode_switch_node_count(port);
	if (!count) {
		...
	}

	_switches = count;

...

> +	switch_desc->typec_ports = devm_kcalloc(
> +		dev, switch_desc->num_typec_switches,

Strange indentation.

> +		sizeof(struct drm_dp_typec_port_data), GFP_KERNEL);

> +

Redundant blank line.

> +	if (!switch_desc->typec_ports)
> +		return -ENOMEM;

...

> +void drm_dp_unregister_typec_switches(struct drm_dp_typec_switch_desc *switch_desc)
> +{
> +	int i;

unsigned?

> +	for (i = 0; i < switch_desc->num_typec_switches; i++)
> +		typec_mux_unregister(switch_desc->typec_ports[i].typec_mux);
> +}

...

>  #include <linux/delay.h>
>  #include <linux/i2c.h>
> +#include <linux/usb/typec_mux.h>

I don't see users of this.
But a few forward declarations are missing.

>  #include <drm/display/drm_dp.h>
>  #include <drm/drm_connector.h>

...

> +#define fwnode_for_each_typec_mode_switch(port, sw)	\
> +	fwnode_for_each_child_node((port), (sw))	\
> +		for_each_if(fwnode_property_present((sw), "mode-switch"))

Please don't use fwnode namespace (see above), something like

#define for_each_typec_mode_switch_node(port, sw)	\
	...

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux