Hi Hans On Sat, 18 Feb 2023 at 11:33, Hans Verkuil <hverkuil@xxxxxxxxx> wrote: > > Hi Maxime, Dave, > > On 26/01/2023 14:46, Maxime Ripard wrote: > > From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> > > > > Copy Intel's "Broadcast RGB" property semantics to add manual override > > of the HDMI pixel range for monitors that don't abide by the content > > of the AVI Infoframe. > > Do we have to copy that property as-is? Firstly I'll agree with your later comment that having this control allows testing of a range of output modes, and working around HDMI sinks that have dodgy implementations. (In our vendor kernel we now also have a property to override the kernel chosen output format to enable testing of YCbCr4:4:4 and 4:2:2 output). The DRM subsystem has the requirement for an open-source userspace project to be using any new property before it will be merged [1]. This property already exists for i915 and gma-500, therefore avoids that requirement. There are objections to the UAPI for Broadcast RGB [2], but if it's good enough for the existing implementations then there can be no objection to it being implemented in the same way for other drivers. Otherwise it is a missing feature of the DRM API, and the linked discussion is realistically at least a year away from being resolved. Why bury our heads in the sand for that period? [1] https://dri.freedesktop.org/docs/drm/gpu/drm-uapi.html#open-source-userspace-requirements [2] https://lists.freedesktop.org/archives/dri-devel/2023-February/391061.html > First of all, I think this should really be a drm-level property, rather than > a driver property: RGB Quantization Range mismatches are the bane of my life, > and I think a way to override this would help everyone. Linked to above, if it were the preferred method for controlling this then I would expect it to become a drm-level property. > Secondly, I hate the name they came up with: 'Broadcast RGB' is pretty meaningless. > Can't we stick to something closer to what the CTA-861/HDMI specs use, which is > 'RGB Quantization Range'? So either use that, or just 'RGB Range'. > > In addition, 'Limited 16:235' should just be 'Limited' since the actual range > depends on the bits-per-color-component. It's documented UAPI with those names[3], therefore any change would be a change to user-space's expectation and a regression. At least by sticking with the same names then any user space implementation that exists for i915 or gma-500 will also work in the same way on vc4. [3] https://www.kernel.org/doc/html/latest/gpu/drm-kms.html#existing-kms-properties > > > > Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> > > Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> > > --- > > drivers/gpu/drm/vc4/vc4_hdmi.c | 97 ++++++++++++++++++++++++++++++++++++++++-- > > drivers/gpu/drm/vc4/vc4_hdmi.h | 9 ++++ > > 2 files changed, 102 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c > > index 4b3bf77bb5cd..78749c6fa837 100644 > > --- a/drivers/gpu/drm/vc4/vc4_hdmi.c > > +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c > > @@ -150,10 +150,16 @@ static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode, > > } > > > > static bool vc4_hdmi_is_full_range_rgb(struct vc4_hdmi *vc4_hdmi, > > - const struct drm_display_mode *mode) > > + struct vc4_hdmi_connector_state *vc4_state) > > { > > + const struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode; > > struct drm_display_info *display = &vc4_hdmi->connector.display_info; > > > > + if (vc4_state->broadcast_rgb == VC4_HDMI_BROADCAST_RGB_LIMITED) > > + return false; > > + else if (vc4_state->broadcast_rgb == VC4_HDMI_BROADCAST_RGB_FULL) > > + return true; > > + > > return !display->is_hdmi || > > drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL; > > } > > @@ -524,8 +530,12 @@ static int vc4_hdmi_connector_atomic_check(struct drm_connector *connector, > > { > > struct drm_connector_state *old_state = > > drm_atomic_get_old_connector_state(state, connector); > > + struct vc4_hdmi_connector_state *old_vc4_state = > > + conn_state_to_vc4_hdmi_conn_state(old_state); > > struct drm_connector_state *new_state = > > drm_atomic_get_new_connector_state(state, connector); > > + struct vc4_hdmi_connector_state *new_vc4_state = > > + conn_state_to_vc4_hdmi_conn_state(new_state); > > struct drm_crtc *crtc = new_state->crtc; > > > > if (!crtc) > > @@ -558,6 +568,7 @@ static int vc4_hdmi_connector_atomic_check(struct drm_connector *connector, > > } > > > > if (old_state->colorspace != new_state->colorspace || > > + old_vc4_state->broadcast_rgb != new_vc4_state->broadcast_rgb || > > The problem with this is that this will cause a mode change, even though all > that is necessary is to update the csc matrix and AVI InfoFrame. > > I used this code (added just before the 'return 0;' at the end of this function): > > if (old_vc4_state->broadcast_rgb != new_vc4_state->broadcast_rgb) { > const struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode; > > old_vc4_state->broadcast_rgb = new_vc4_state->broadcast_rgb; > vc4_hdmi_set_avi_infoframe(encoder); > if (vc4_hdmi->variant->csc_setup) > vc4_hdmi->variant->csc_setup(vc4_hdmi, old_state, mode); > } > > I'm certain this is in the wrong place, but I'm not familiar enough with the drm API > to determine where this should go. atomic_check is meant to validate the state, but must never touch the hardware [4]. atomic_commit updates the hardware, although for struct drm_connector_helper_funcs atomic_commit is documented as only being applicable for writeback connectors [5]. Hence our only sensible options are to trigger a mode change which reprograms everything, or ignore the helpers. There may be scope for improving this, but it'll need significant driver (and possibly framework) rework in order to be done properly. [4] https://elixir.bootlin.com/linux/latest/source/include/drm/drm_modeset_helper_vtables.h#L1083 [5] https://elixir.bootlin.com/linux/latest/source/include/drm/drm_modeset_helper_vtables.h#L1101 > This approach probably applies to the hdr_metadata metadata as well, that too > doesn't need a mode change. > > I see that the i915 driver has a 'fastset' mechanism for changes like this, but > it is not clear to me how that interacts with the drm API. > > I've been playing around with this vc4 driver and it is proving to be very useful > for debugging all sorts of quantization range bugs in other equipment. Glad it's proving useful. We're also needing it as users have misbehaving monitors, and telling them to replace the monitor as it breaks the HDMI spec generally doesn't go down well! Likewise I've had users needing YCbCr444 output because of some limitation in their receiving device, hence overriding the kernel choice of output mode. It'd be nice if there were consensus on the correct way to achieve that. Cheers. Dave > Regards, > > Hans > > > !drm_connector_atomic_hdr_metadata_equal(old_state, new_state)) { > > struct drm_crtc_state *crtc_state; > > > > @@ -571,6 +582,49 @@ static int vc4_hdmi_connector_atomic_check(struct drm_connector *connector, > > return 0; > > } > > > > +static int vc4_hdmi_connector_get_property(struct drm_connector *connector, > > + const struct drm_connector_state *state, > > + struct drm_property *property, > > + uint64_t *val) > > +{ > > + struct drm_device *drm = connector->dev; > > + struct vc4_hdmi *vc4_hdmi = > > + connector_to_vc4_hdmi(connector); > > + const struct vc4_hdmi_connector_state *vc4_conn_state = > > + conn_state_to_vc4_hdmi_conn_state(state); > > + > > + if (property == vc4_hdmi->broadcast_rgb_property) { > > + *val = vc4_conn_state->broadcast_rgb; > > + } else { > > + drm_dbg(drm, "Unknown property [PROP:%d:%s]\n", > > + property->base.id, property->name); > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +static int vc4_hdmi_connector_set_property(struct drm_connector *connector, > > + struct drm_connector_state *state, > > + struct drm_property *property, > > + uint64_t val) > > +{ > > + struct drm_device *drm = connector->dev; > > + struct vc4_hdmi *vc4_hdmi = > > + connector_to_vc4_hdmi(connector); > > + struct vc4_hdmi_connector_state *vc4_conn_state = > > + conn_state_to_vc4_hdmi_conn_state(state); > > + > > + if (property == vc4_hdmi->broadcast_rgb_property) { > > + vc4_conn_state->broadcast_rgb = val; > > + return 0; > > + } > > + > > + drm_dbg(drm, "Unknown property [PROP:%d:%s]\n", > > + property->base.id, property->name); > > + return -EINVAL; > > +} > > + > > static void vc4_hdmi_connector_reset(struct drm_connector *connector) > > { > > struct vc4_hdmi_connector_state *old_state = > > @@ -590,6 +644,7 @@ static void vc4_hdmi_connector_reset(struct drm_connector *connector) > > new_state->base.max_bpc = 8; > > new_state->base.max_requested_bpc = 8; > > new_state->output_format = VC4_HDMI_OUTPUT_RGB; > > + new_state->broadcast_rgb = VC4_HDMI_BROADCAST_RGB_AUTO; > > drm_atomic_helper_connector_tv_margins_reset(connector); > > } > > > > @@ -607,6 +662,7 @@ vc4_hdmi_connector_duplicate_state(struct drm_connector *connector) > > new_state->tmds_char_rate = vc4_state->tmds_char_rate; > > new_state->output_bpc = vc4_state->output_bpc; > > new_state->output_format = vc4_state->output_format; > > + new_state->broadcast_rgb = vc4_state->broadcast_rgb; > > __drm_atomic_helper_connector_duplicate_state(connector, &new_state->base); > > > > return &new_state->base; > > @@ -617,6 +673,8 @@ static const struct drm_connector_funcs vc4_hdmi_connector_funcs = { > > .reset = vc4_hdmi_connector_reset, > > .atomic_duplicate_state = vc4_hdmi_connector_duplicate_state, > > .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > + .atomic_get_property = vc4_hdmi_connector_get_property, > > + .atomic_set_property = vc4_hdmi_connector_set_property, > > }; > > > > static const struct drm_connector_helper_funcs vc4_hdmi_connector_helper_funcs = { > > @@ -625,6 +683,33 @@ static const struct drm_connector_helper_funcs vc4_hdmi_connector_helper_funcs = > > .atomic_check = vc4_hdmi_connector_atomic_check, > > }; > > > > +static const struct drm_prop_enum_list broadcast_rgb_names[] = { > > + { VC4_HDMI_BROADCAST_RGB_AUTO, "Automatic" }, > > + { VC4_HDMI_BROADCAST_RGB_FULL, "Full" }, > > + { VC4_HDMI_BROADCAST_RGB_LIMITED, "Limited 16:235" }, > > +}; > > + > > +static void > > +vc4_hdmi_attach_broadcast_rgb_property(struct drm_device *dev, > > + struct vc4_hdmi *vc4_hdmi) > > +{ > > + struct drm_property *prop = vc4_hdmi->broadcast_rgb_property; > > + > > + if (!prop) { > > + prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, > > + "Broadcast RGB", > > + broadcast_rgb_names, > > + ARRAY_SIZE(broadcast_rgb_names)); > > + if (!prop) > > + return; > > + > > + vc4_hdmi->broadcast_rgb_property = prop; > > + } > > + > > + drm_object_attach_property(&vc4_hdmi->connector.base, prop, > > + VC4_HDMI_BROADCAST_RGB_AUTO); > > +} > > + > > static int vc4_hdmi_connector_init(struct drm_device *dev, > > struct vc4_hdmi *vc4_hdmi) > > { > > @@ -671,6 +756,8 @@ static int vc4_hdmi_connector_init(struct drm_device *dev, > > if (vc4_hdmi->variant->supports_hdr) > > drm_connector_attach_hdr_output_metadata_property(connector); > > > > + vc4_hdmi_attach_broadcast_rgb_property(dev, vc4_hdmi); > > + > > drm_connector_attach_encoder(connector, encoder); > > > > return 0; > > @@ -825,7 +912,7 @@ static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder) > > > > drm_hdmi_avi_infoframe_quant_range(&frame.avi, > > connector, mode, > > - vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode) ? > > + vc4_hdmi_is_full_range_rgb(vc4_hdmi, vc4_state) ? > > HDMI_QUANTIZATION_RANGE_FULL : > > HDMI_QUANTIZATION_RANGE_LIMITED); > > drm_hdmi_avi_infoframe_colorimetry(&frame.avi, cstate); > > @@ -1066,6 +1153,8 @@ static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, > > struct drm_connector_state *state, > > const struct drm_display_mode *mode) > > { > > + struct vc4_hdmi_connector_state *vc4_state = > > + conn_state_to_vc4_hdmi_conn_state(state); > > struct drm_device *drm = vc4_hdmi->connector.dev; > > unsigned long flags; > > u32 csc_ctl; > > @@ -1079,7 +1168,7 @@ static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, > > csc_ctl = VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR, > > VC4_HD_CSC_CTL_ORDER); > > > > - if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode)) { > > + if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, vc4_state)) { > > /* CEA VICs other than #1 requre limited range RGB > > * output unless overridden by an AVI infoframe. > > * Apply a colorspace conversion to squash 0-255 down > > @@ -1232,7 +1321,7 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, > > case VC4_HDMI_OUTPUT_RGB: > > if_xbar = 0x354021; > > > > - if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode)) > > + if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, vc4_state)) > > vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_to_limited_rgb); > > else > > vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_unity); > > diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h > > index 5d249ac54cd1..89800c48aa24 100644 > > --- a/drivers/gpu/drm/vc4/vc4_hdmi.h > > +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h > > @@ -117,6 +117,12 @@ enum vc4_hdmi_output_format { > > VC4_HDMI_OUTPUT_YUV420, > > }; > > > > +enum vc4_hdmi_broadcast_rgb { > > + VC4_HDMI_BROADCAST_RGB_AUTO, > > + VC4_HDMI_BROADCAST_RGB_FULL, > > + VC4_HDMI_BROADCAST_RGB_LIMITED, > > +}; > > + > > /* General HDMI hardware state. */ > > struct vc4_hdmi { > > struct vc4_hdmi_audio audio; > > @@ -129,6 +135,8 @@ struct vc4_hdmi { > > > > struct delayed_work scrambling_work; > > > > + struct drm_property *broadcast_rgb_property; > > + > > struct i2c_adapter *ddc; > > void __iomem *hdmicore_regs; > > void __iomem *hd_regs; > > @@ -238,6 +246,7 @@ struct vc4_hdmi_connector_state { > > unsigned long long tmds_char_rate; > > unsigned int output_bpc; > > enum vc4_hdmi_output_format output_format; > > + enum vc4_hdmi_broadcast_rgb broadcast_rgb; > > }; > > > > #define conn_state_to_vc4_hdmi_conn_state(_state) \ > > >
