[RFC PATCH v3 3/4] drm/msm/dpu: Remove empty prepare_commit() function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now that the TE setup has been moved to prepare_for_kickoff(), and
dpu_encoder_prepare_commit() is not empty, remove prepare_commit()
from DPU driver.

Changes in V3:
- Reworded commit message to be more clear
- Corrected spelling mistake in commit message

Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 19 -------------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h |  7 -------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 21 ---------------------
 3 files changed, 47 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index dcceed91aed8..35e120b5ef53 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2090,25 +2090,6 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
 	ctl->ops.clear_pending_flush(ctl);
 }
 
-void dpu_encoder_prepare_commit(struct drm_encoder *drm_enc)
-{
-	struct dpu_encoder_virt *dpu_enc;
-	struct dpu_encoder_phys *phys;
-	int i;
-
-	if (!drm_enc) {
-		DPU_ERROR("invalid encoder\n");
-		return;
-	}
-	dpu_enc = to_dpu_encoder_virt(drm_enc);
-
-	for (i = 0; i < dpu_enc->num_phys_encs; i++) {
-		phys = dpu_enc->phys_encs[i];
-		if (phys->ops.prepare_commit)
-			phys->ops.prepare_commit(phys);
-	}
-}
-
 #ifdef CONFIG_DEBUG_FS
 static int _dpu_encoder_status_show(struct seq_file *s, void *data)
 {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
index 9e7236ef34e6..2c9ef8d1b877 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
@@ -146,13 +146,6 @@ struct drm_encoder *dpu_encoder_init(
 int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc,
 		struct msm_display_info *disp_info);
 
-/**
- * dpu_encoder_prepare_commit - prepare encoder at the very beginning of an
- *	atomic commit, before any registers are written
- * @drm_enc:    Pointer to previously created drm encoder structure
- */
-void dpu_encoder_prepare_commit(struct drm_encoder *drm_enc);
-
 /**
  * dpu_encoder_set_idle_timeout - set the idle timeout for video
  *                    and command mode encoders.
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 165958d47ec6..6f7ddbf0d9b7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -425,26 +425,6 @@ static ktime_t dpu_kms_vsync_time(struct msm_kms *kms, struct drm_crtc *crtc)
 	return ktime_get();
 }
 
-static void dpu_kms_prepare_commit(struct msm_kms *kms,
-		struct drm_atomic_state *state)
-{
-	struct drm_crtc *crtc;
-	struct drm_crtc_state *crtc_state;
-	struct drm_encoder *encoder;
-	int i;
-
-	if (!kms)
-		return;
-
-	/* Call prepare_commit for all affected encoders */
-	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
-		drm_for_each_encoder_mask(encoder, crtc->dev,
-					  crtc_state->encoder_mask) {
-			dpu_encoder_prepare_commit(encoder);
-		}
-	}
-}
-
 static void dpu_kms_flush_commit(struct msm_kms *kms, unsigned crtc_mask)
 {
 	struct dpu_kms *dpu_kms = to_dpu_kms(kms);
@@ -949,7 +929,6 @@ static const struct msm_kms_funcs kms_funcs = {
 	.enable_commit   = dpu_kms_enable_commit,
 	.disable_commit  = dpu_kms_disable_commit,
 	.vsync_time      = dpu_kms_vsync_time,
-	.prepare_commit  = dpu_kms_prepare_commit,
 	.flush_commit    = dpu_kms_flush_commit,
 	.wait_flush      = dpu_kms_wait_flush,
 	.complete_commit = dpu_kms_complete_commit,
-- 
2.39.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux