Re: [PATCH v12 02/14] drm/msm/disp/dpu: get timing engine status from intf status register

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

On 30/01/2023 17:11, Vinod Polimera wrote:
> Recommended way of reading the interface timing gen status is via
> status register. Timing gen status register will give a reliable status
> of the interface especially during ON/OFF transitions. This support was
> added from DPU version 5.0.0.
>
> Signed-off-by: Vinod Polimera <quic_vpolimer@xxxxxxxxxxx>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c |  6 ++++--
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 12 +++++++-----
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c    |  8 +++++++-
>   3 files changed, 18 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index cf053e8..ce6e9e6 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -78,9 +78,11 @@
>   
>   #define INTF_SDM845_MASK (0)
>   
> -#define INTF_SC7180_MASK BIT(DPU_INTF_INPUT_CTRL) | BIT(DPU_INTF_TE)
> +#define INTF_SC7180_MASK \
> +	(BIT(DPU_INTF_INPUT_CTRL) | BIT(DPU_INTF_TE) | BIT(DPU_INTF_STATUS_SUPPORTED))
>   
> -#define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
> +#define INTF_SC7280_MASK \
> +	(INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN))

Not necessary anymore.

With that fixed:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

>   
>   #define IRQ_SDM845_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
>   			 BIT(MDP_SSPP_TOP0_INTR2) | \
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index ddab9ca..08cd1a1 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -213,17 +213,19 @@ enum {
>   
>   /**
>    * INTF sub-blocks
> - * @DPU_INTF_INPUT_CTRL         Supports the setting of pp block from which
> - *                              pixel data arrives to this INTF
> - * @DPU_INTF_TE                 INTF block has TE configuration support
> - * @DPU_DATA_HCTL_EN            Allows data to be transferred at different rate
> -                                than video timing
> + * @DPU_INTF_INPUT_CTRL             Supports the setting of pp block from which
> + *                                  pixel data arrives to this INTF
> + * @DPU_INTF_TE                     INTF block has TE configuration support
> + * @DPU_DATA_HCTL_EN                Allows data to be transferred at different rate
> + *                                  than video timing
> + * @DPU_INTF_STATUS_SUPPORTED       INTF block has INTF_STATUS register
>    * @DPU_INTF_MAX
>    */
>   enum {
>   	DPU_INTF_INPUT_CTRL = 0x1,
>   	DPU_INTF_TE,
>   	DPU_DATA_HCTL_EN,
> +	DPU_INTF_STATUS_SUPPORTED,
>   	DPU_INTF_MAX
>   };
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> index 7ce66bf..84ee2ef 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> @@ -62,6 +62,7 @@
>   #define   INTF_LINE_COUNT               0x0B0
>   
>   #define   INTF_MUX                      0x25C
> +#define   INTF_STATUS                   0x26C
>   
>   #define INTF_CFG_ACTIVE_H_EN	BIT(29)
>   #define INTF_CFG_ACTIVE_V_EN	BIT(30)
> @@ -297,8 +298,13 @@ static void dpu_hw_intf_get_status(
>   		struct intf_status *s)
>   {
>   	struct dpu_hw_blk_reg_map *c = &intf->hw;
> +	unsigned long cap = intf->cap->features;
> +
> +	if (cap & BIT(DPU_INTF_STATUS_SUPPORTED))
> +		s->is_en = DPU_REG_READ(c, INTF_STATUS) & BIT(0);
> +	else
> +		s->is_en = DPU_REG_READ(c, INTF_TIMING_ENGINE_EN);
>   
> -	s->is_en = DPU_REG_READ(c, INTF_TIMING_ENGINE_EN);
>   	s->is_prog_fetch_en = !!(DPU_REG_READ(c, INTF_CONFIG) & BIT(31));
>   	if (s->is_en) {
>   		s->frame_count = DPU_REG_READ(c, INTF_FRAME_COUNT);

--
With best wishes
Dmitry