On 20/01/2023 10:47, Jianhua Lu wrote: > Add Kinetic KTZ8866 backlight binding documentation. > > Signed-off-by: Jianhua Lu <lujianhua000@xxxxxxxxx> > --- > Changes in v2: > - Remove "items" between "compatible" and "const: kinetic,ktz8866". > - Change "additionalProperties" to "unevaluatedProperties". > > Changes in v3: > - Add Krzysztof's R-b. > > Changes in v4: > - Drop Krzysztof's R-b. > - Add some new properties. > > Changes in v5: > - Add missing enum under property description. > - Rename uncorrect properties. > > Changes in v6: > - Correct wrong property suffix and description. > > Changes in v7: > - Add vddpos and vddeg supply. > - Use enable-gpios instead of defining enable pin. > > .../leds/backlight/kinetic,ktz8866.yaml | 74 +++++++++++++++++++ > 1 file changed, 74 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml > > diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml > new file mode 100644 > index 000000000000..b1d0ade0dfb6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml > @@ -0,0 +1,74 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Kinetic Technologies KTZ8866 backlight > + > +maintainers: > + - Jianhua Lu <lujianhua000@xxxxxxxxx> > + > +description: | > + The Kinetic Technologies KTZ8866 is a high efficiency 6-channels-current-sinks > + led backlight with dual lcd bias power. > + https://www.kinet-ic.com/ktz8866/ > + > +allOf: > + - $ref: common.yaml# > + > +properties: > + compatible: > + const: kinetic,ktz8866 > + > + vddpos-supply: > + description: positive boost supply regulator. > + > + vddneg-supply: > + description: negative boost supply regulator. > + > + enable-gpios: > + description: GPIO to use to enable/disable the backlight (HWEN pin). > + maxItems: 1 > + > + current-num-sinks: > + description: number of the LED current sinks' channels. > + enum: [1, 2, 3, 4, 5, 6] > + > + current-ramping-time-ms: > + description: LED current ramping time in milliseconds. > + enum: [2, 4, 8, 16, 32, 64, 128, 192, 256, 320, 384, 448, 512, 576, 640] kinetic,current-ramp-delay-ms > + > + led-ramping-time-ms: kinetic,led-enable-ramp-delay-ms So both are similar to existing regulator properties. Best regards, Krzysztof
