On Thu, Jan 19, 2023 at 11:49:55AM -0800, Alan Previn wrote:
> The Driver-FLR flow may inadvertently exit early before the full
> completion of the re-init of the internal HW state if we only poll
> GU_DEBUG Bit31 (polling for it to toggle from 0 -> 1). Instead
> we need a two-step completion wait-for-completion flow that also
> involves GU_CNTL. See the patch and new code comments for detail.
> This is new direction from HW architecture folks.
Do we have this documented anywhere?
but the patch looks good to me...
>
> Signed-off-by: Alan Previn <alan.previn.teres.alexis@xxxxxxxxx>
> Fixes: 5a44fcd73498 ("drm/i915/gsc: Do a driver-FLR on unload if GSC was loaded")
> ---
> drivers/gpu/drm/i915/intel_uncore.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
> index 8dee9e62a73e..959869e2ff05 100644
> --- a/drivers/gpu/drm/i915/intel_uncore.c
> +++ b/drivers/gpu/drm/i915/intel_uncore.c
> @@ -2748,6 +2748,12 @@ static void driver_initiated_flr(struct intel_uncore *uncore)
> /* Trigger the actual Driver-FLR */
> intel_uncore_rmw_fw(uncore, GU_CNTL, 0, DRIVERFLR);
>
> + /* Completion Step 1 - poll for 'CNTL-BIT31 = 0' wait for hw teardown to complete */
> + ret = intel_wait_for_register_fw(uncore, GU_CNTL,
> + DRIVERFLR_STATUS, 0,
> + flr_timeout_ms);
> +
> + /* Completion: Step 2 - poll for 'DEBUG-BIT31 = 1' for hw/fw re-init to complete */
> ret = intel_wait_for_register_fw(uncore, GU_DEBUG,
> DRIVERFLR_STATUS, DRIVERFLR_STATUS,
> flr_timeout_ms);
> @@ -2756,6 +2762,7 @@ static void driver_initiated_flr(struct intel_uncore *uncore)
> return;
> }
>
> + /* Write 1 to clear GU_DEBUG's sticky completion status bit */
> intel_uncore_write_fw(uncore, GU_DEBUG, DRIVERFLR_STATUS);
> }
>
>
> base-commit: 0a0ee61784df01ac098a92bd43673ee30c629f13
> --
> 2.39.0
>
