On Wed, Jan 18, 2023 at 04:58:26AM +0200, Dmitry Baryshkov wrote:
> On 08/12/2022 00:00, Bjorn Andersson wrote:
> > From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> >
> > Define the display clock controllers, the MDSS instances, the DP phys
> > and connect these together.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> > ---
> >
> > Changes since v4:
> > - None
> >
> > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
> > 1 file changed, 838 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > index 9f3132ac2857..c2f186495506 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > @@ -4,6 +4,7 @@
> > * Copyright (c) 2022, Linaro Limited
> > */
> > +#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
> > #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
> > #include <dt-bindings/clock/qcom,rpmh.h>
> > #include <dt-bindings/interconnect/qcom,sc8280xp.h>
> > @@ -1698,6 +1699,44 @@ usb_1_qmpphy: phy@8903000 {
> > status = "disabled";
> > };
> > + mdss1_dp0_phy: phy@8909a00 {
> > + compatible = "qcom,sc8280xp-dp-phy";
> > + reg = <0 0x08909a00 0 0x19c>,
> > + <0 0x08909200 0 0xec>,
> > + <0 0x08909600 0 0xec>,
> > + <0 0x08909000 0 0x1c8>;
> > +
> > + clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
> > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> > + clock-names = "aux", "cfg_ahb";
> > +
> > + power-domains = <&rpmhpd SC8280XP_MX>;
> > +
> > + #clock-cells = <1>;
> > + #phy-cells = <0>;
> > +
> > + status = "disabled";
> > + };
> > +
> > + mdss1_dp1_phy: phy@890ca00 {
> > + compatible = "qcom,sc8280xp-dp-phy";
> > + reg = <0 0x0890ca00 0 0x19c>,
> > + <0 0x0890c200 0 0xec>,
> > + <0 0x0890c600 0 0xec>,
> > + <0 0x0890c000 0 0x1c8>;
> > +
> > + clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
> > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> > + clock-names = "aux", "cfg_ahb";
> > +
> > + power-domains = <&rpmhpd SC8280XP_MX>;
> > +
> > + #clock-cells = <1>;
> > + #phy-cells = <0>;
> > +
> > + status = "disabled";
> > + };
> > +
> > system-cache-controller@9200000 {
> > compatible = "qcom,sc8280xp-llcc";
> > reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
> > @@ -1813,6 +1852,326 @@ usb_1_dwc3: usb@a800000 {
> > };
> > };
> > + mdss0: display-subsystem@ae00000 {
> > + compatible = "qcom,sc8280xp-mdss";
> > + reg = <0 0x0ae00000 0 0x1000>;
> > + reg-names = "mdss";
> > +
> > + power-domains = <&dispcc0 MDSS_GDSC>;
> > +
> > + clocks = <&gcc GCC_DISP_AHB_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
> > + clock-names = "iface",
> > + "ahb",
> > + "core";
> > +
> > + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
> > +
> > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > +
> > + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> > + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> > + interconnect-names = "mdp0-mem", "mdp1-mem";
> > +
> > + iommus = <&apps_smmu 0x1000 0x402>;
> > +
> > + status = "disabled";
> > +
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + mdss0_mdp: display-controller@ae01000 {
> > + compatible = "qcom,sc8280xp-dpu";
> > + reg = <0 0x0ae01000 0 0x8f000>,
> > + <0 0x0aeb0000 0 0x2008>;
> > + reg-names = "mdp", "vbif";
> > +
> > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> > + <&gcc GCC_DISP_SF_AXI_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> > + clock-names = "bus",
> > + "nrt_bus",
> > + "iface",
> > + "lut",
> > + "core",
> > + "vsync";
> > +
> > + assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> > + assigned-clock-rates = <460000000>,
> > + <19200000>;
> > +
> > + operating-points-v2 = <&mdss0_mdp_opp_table>;
> > + power-domains = <&rpmhpd SC8280XP_MMCX>;
> > +
> > + interrupt-parent = <&mdss0>;
> > + interrupts = <0>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@5 {
> > + reg = <5>;
> > + mdss0_intf5_out: endpoint {
> > + remote-endpoint = <&mdss0_dp3_in>;
> > + };
> > + };
> > +
> > + port@6 {
> > + reg = <6>;
> > + mdss0_intf6_out: endpoint {
> > + remote-endpoint = <&mdss0_dp2_in>;
> > + };
> > + };
> > + };
>
> This now fails with:
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dtb: display-controller@ae01000:
> ports: 'port@0' is a required property
> From schema:
> Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dtb: display-controller@ae01000:
> Unevaluated properties are not allowed ('ports' was unexpected)
> From schema:
> Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
>
> We do not map reg ids to INTF indices. So, unless you plan to change that,
> could you please change these to port@0 / port@1 ?
>
Too bad, I liked the fact that I gave these numbers any form of meaning.
I guess we can change it to just be an arbitrary index, and keep the
intf-information in the label...
Regards,
Bjorn
> [skipped the rest]
>
> --
> With best wishes
> Dmitry
>
