On 16/01/2023 23:49, Richard Acayan wrote:
From: Daniel Mentz <danielmentz@xxxxxxxxxx>
The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.
Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.
Fixes: 1a9d759331b8 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@xxxxxxxxxx>
Link: https://android.googlesource.com/kernel/msm/+/754affd62d0ee268c686c53169b1dbb7deac8550
[richard: fix 16-bit brightness_get]
[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]
Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx>
Tested-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
---
drivers/gpu/drm/drm_mipi_dsi.c | 52 ++++++++++++++++++++++++++++++++++
include/drm/drm_mipi_dsi.h | 4 +++
2 files changed, 56 insertions(+)
diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
index 497ef4b6a90a..4bc15fbd009d 100644
--- a/drivers/gpu/drm/drm_mipi_dsi.c
+++ b/drivers/gpu/drm/drm_mipi_dsi.c
@@ -1224,6 +1224,58 @@ int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
}
EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness);
+/**
+ * mipi_dsi_dcs_set_display_brightness_large() - sets the 16-bit brightness value
+ * of the display
+ * @dsi: DSI peripheral device
+ * @brightness: brightness value
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_display_brightness_large(struct mipi_dsi_device *dsi,
+ u16 brightness)
+{
+ u8 payload[2] = { brightness >> 8, brightness & 0xff };
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
+ payload, sizeof(payload));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness_large);
+
+/**
+ * mipi_dsi_dcs_get_display_brightness_large() - gets the current 16-bit
+ * brightness value of the display
+ * @dsi: DSI peripheral device
+ * @brightness: brightness value
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_display_brightness_large(struct mipi_dsi_device *dsi,
+ u16 *brightness)
+{
+ u8 brightness_be[2];
+ ssize_t err;
+
+ err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
+ brightness_be, sizeof(brightness_be));
+ if (err <= 0) {
+ if (err == 0)
+ err = -ENODATA;
+
+ return err;
+ }
+
+ *brightness = (brightness_be[0] << 8) | brightness_be[1];
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness_large);
+
static int mipi_dsi_drv_probe(struct device *dev)
{
struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver);
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index 4f503d99f668..16f30975b22b 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -296,6 +296,10 @@ int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
u16 brightness);
int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
u16 *brightness);
+int mipi_dsi_dcs_set_display_brightness_large(struct mipi_dsi_device *dsi,
+ u16 brightness);
+int mipi_dsi_dcs_get_display_brightness_large(struct mipi_dsi_device *dsi,
+ u16 *brightness);
/**
* mipi_dsi_generic_write_seq - transmit data using a generic write packet
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
