Re: remove arch/sh

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/17/23 12:26, Geert Uytterhoeven wrote:
Hi Rob,

On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@xxxxxxxxxxx> wrote:
On 1/16/23 01:13, Christoph Hellwig wrote:
On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
I'm still maintaining and using this port in Debian.

It's a bit disappointing that people keep hammering on it. It works fine for me.

What platforms do you (or your users) use it on?

3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
sh4 emulator.

I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
different kinds of boards running it here). There's an existing mmu version of
j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
released yet, I have yet to get that to run Linux because the mmu code would
need adapting, but the most recent customer projects were on the existing nommu
SOC, as was last year's ASIC work via sky130.

J4 still vaporware?

My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
little blue one is... sh4a I think? (It can run the same userspace, I haven't
replaced that board's kernel since I got it, I think it's the type Glaubitz is
using? It's mostly in case he had an issue I couldn't reproduce on different
hardware, or if I spill something on my N40.)

I also have a physical sh2 board on the shelf which I haven't touched in years
(used to comparison test during j2 development, and then the j2 boards replaced it).

I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
really convenient: neither of my physical boards boot from SD card so replacing
the kernel requires reflashing soldered in flash. (They'll net mount userspace
but I haven't gotten either bootloader to net-boot a kernel.)

On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
kernel, and use kexec to boot-test each and every renesas-drivers
release.  Note that this requires both the original 2.6.22 kernel
and matching kexec-tools.  Apparently both upstreamed kernel and
kexec-tools support for SH are different, and incompatible with each
other, so you cannot kexec from a contemporary kernel.
I tried working my way up from 2.6.22, but gave up around 2.6.29.
Probably I should do this with r2d and qemu instead ;-)

Both r2d and landisk are SH7751.

Probably SH7722/'23'24 (e.g. Migo-R and Ecovec boards) are also
worth keeping.  Most on-SoC blocks have drivers with DT support,
as they are shared with ARM.  So the hardest part is clock and
interrupt-controller support.
Unfortunately I no longer have access to the (remote) Migo-R.


Since there are people around with real hardware .... is sh in big endian mode
(sheb) real ? Its qemu support is quite limited; most PCI devices don't work
due to endianness issues. It would be interesting to know if this works better
with real hardware.

Thanks,
Guenter




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux