On 14/01/2023 01:00, Richard Acayan wrote:
> These panels communicate brightness in big endian. This is not a quirk
> of the panels themselves, but rather, a part of the MIPI standard. Use
> the new mipi_dsi_dcs_set_display_brightness_wide() function that
> properly handles 16-bit brightness instead of doing special processing
> of the brightness values.
>
> Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx>
Awesome! Thanks for this series, glad to know this isn't a weird panel
quirk aha.
This works fine on the OnePlus 6 (the user of this panel), so for both
patches:
Tested-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/panel/panel-samsung-sofef00.c | 9 ++-------
> 1 file changed, 2 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-samsung-sofef00.c b/drivers/gpu/drm/panel/panel-samsung-sofef00.c
> index 1a0d24595faa..014fe350bc59 100644
> --- a/drivers/gpu/drm/panel/panel-samsung-sofef00.c
> +++ b/drivers/gpu/drm/panel/panel-samsung-sofef00.c
> @@ -10,7 +10,6 @@
> #include <linux/of.h>
> #include <linux/of_device.h>
> #include <linux/regulator/consumer.h>
> -#include <linux/swab.h>
> #include <linux/backlight.h>
>
> #include <video/mipi_display.h>
> @@ -221,13 +220,9 @@ static int sofef00_panel_bl_update_status(struct backlight_device *bl)
> {
> struct mipi_dsi_device *dsi = bl_get_data(bl);
> int err;
> - u16 brightness;
> + u16 brightness = (u16)backlight_get_brightness(bl);
>
> - brightness = (u16)backlight_get_brightness(bl);
> - // This panel needs the high and low bytes swapped for the brightness value
> - brightness = __swab16(brightness);
> -
> - err = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
> + err = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
> if (err < 0)
> return err;
>
> --
> 2.39.0
>
--
Kind Regards,
Caleb
