Hi Stephen,
On Fri, Jan 06, 2023 at 05:48:52PM +0100, Stephen Kitt wrote:
> Instead of retrieving the backlight brightness in struct
> backlight_properties manually, and then checking whether the backlight
> should be on at all, use backlight_get_brightness() which does all
> this and insulates this from future changes.
>
> Signed-off-by: Stephen Kitt <steve@xxxxxxx>
Nice cleanup.
Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> ---
> drivers/video/backlight/aat2870_bl.c | 7 +------
> 1 file changed, 1 insertion(+), 6 deletions(-)
>
> diff --git a/drivers/video/backlight/aat2870_bl.c b/drivers/video/backlight/aat2870_bl.c
> index a7af9adafad6..1cbb303e9c88 100644
> --- a/drivers/video/backlight/aat2870_bl.c
> +++ b/drivers/video/backlight/aat2870_bl.c
> @@ -59,7 +59,7 @@ static int aat2870_bl_update_status(struct backlight_device *bd)
> struct aat2870_bl_driver_data *aat2870_bl = bl_get_data(bd);
> struct aat2870_data *aat2870 =
> dev_get_drvdata(aat2870_bl->pdev->dev.parent);
> - int brightness = bd->props.brightness;
> + int brightness = backlight_get_brightness(bd);
> int ret;
>
> if ((brightness < 0) || (bd->props.max_brightness < brightness)) {
> @@ -70,11 +70,6 @@ static int aat2870_bl_update_status(struct backlight_device *bd)
> dev_dbg(&bd->dev, "brightness=%d, power=%d, state=%d\n",
> bd->props.brightness, bd->props.power, bd->props.state);
>
> - if ((bd->props.power != FB_BLANK_UNBLANK) ||
> - (bd->props.state & BL_CORE_FBBLANK) ||
> - (bd->props.state & BL_CORE_SUSPENDED))
> - brightness = 0;
> -
> ret = aat2870->write(aat2870, AAT2870_BLM,
> (u8)aat2870_brightness(aat2870_bl, brightness));
> if (ret < 0)
> --
> 2.30.2
