On 1/5/23 12:38, Hamza Mahfooz wrote:
> Currently, there are issues with enabling PSR-SU + DSC. This stems from
> the fact that DSC imposes a slice height on transmitted video data and
> we are not conforming to that slice height in PSR-SU regions. So, pass
> slice_height into su_y_granularity to feed the DSC slice height into
> PSR-SU code.
>
> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@xxxxxxx>
> ---
> v2: move code to modules/power.
> ---
> .../drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c | 3 ++
> .../amd/display/modules/power/power_helpers.c | 35 +++++++++++++++++++
> .../amd/display/modules/power/power_helpers.h | 3 ++
> 3 files changed, 41 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
> index 26291db0a3cf..872d06fe1436 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
> @@ -122,6 +122,9 @@ bool amdgpu_dm_link_setup_psr(struct dc_stream_state *stream)
> psr_config.allow_multi_disp_optimizations =
> (amdgpu_dc_feature_mask & DC_PSR_ALLOW_MULTI_DISP_OPT);
>
> + if (!psr_su_set_y_granularity(dc, link, stream, &psr_config))
> + return false;
> +
> ret = dc_link_setup_psr(link, stream, &psr_config, &psr_context);
>
> }
> diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
> index 9b5d9b2c9a6a..4d27ad9f7370 100644
> --- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
> +++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
> @@ -916,3 +916,38 @@ bool mod_power_only_edp(const struct dc_state *context, const struct dc_stream_s
> {
> return context && context->stream_count == 1 && dc_is_embedded_signal(stream->signal);
> }
> +
> +bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
> + struct dc_stream_state *stream,
> + struct psr_config *config)
> +{
> + uint16_t pic_height;
> + uint8_t slice_height;
> +
> + if (!dc->caps.edp_dsc_support ||
> + link->panel_config.dsc.disable_dsc_edp ||
> + !link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT ||
> + !stream->timing.dsc_cfg.num_slices_v)
I'm not sure this condition is correct. We can have DSC but not eDP DSC
support.
> + return true;
> +
> + pic_height = stream->timing.v_addressable +
> + stream->timing.v_border_top + stream->timing.v_border_bottom;
> + slice_height = pic_height / stream->timing.dsc_cfg.num_slices_v;
> +
> + if (slice_height) {
> + if (config->su_y_granularity &&
> + (slice_height % config->su_y_granularity)) {
> + WARN(1,
We don't use WARN in display/dc or display/modules. DC_LOG_WARNING
might be better, or log it in the caller.
Harry
> + "%s: dsc: %d, slice_height: %d, num_slices_v: %d\n",
> + __func__,
> + stream->sink->dsc_caps.dsc_dec_caps.is_dsc_supported,
> + slice_height,
> + stream->timing.dsc_cfg.num_slices_v);
> + return false;
> + }
> +
> + config->su_y_granularity = slice_height;
> + }
> +
> + return true;
> +}
> diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
> index 316452e9dbc9..bb16b37b83da 100644
> --- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
> +++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
> @@ -59,4 +59,7 @@ void mod_power_calc_psr_configs(struct psr_config *psr_config,
> const struct dc_stream_state *stream);
> bool mod_power_only_edp(const struct dc_state *context,
> const struct dc_stream_state *stream);
> +bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
> + struct dc_stream_state *stream,
> + struct psr_config *config);
> #endif /* MODULES_POWER_POWER_HELPERS_H_ */
