Re: [PATCH 2/2] drm/panel: add visionox vtdr6130 DSI panel driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,
I am not a maintainer, but I thought I might give a few comments.

On 03/01/2023 14:22, Neil Armstrong wrote:
Add support for the 1080x2400 Visionox VTDR6130 AMOLED DSI panel
found on the Qualcomm SM8550 MTP board.

By default the the panel is configured to work with DSI compressed
streams, but can work in uncompressed video mode since 1080x2400 in
RGB888 fits in the 4 DSI lanes bandwidth.

While display compression is preferred for performance and power
reasons, let's start with the uncompressed video mode support and
add the DSC support later on.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
  drivers/gpu/drm/panel/Kconfig                   |   8 +
  drivers/gpu/drm/panel/Makefile                  |   1 +
  drivers/gpu/drm/panel/panel-visionox-vtdr6130.c | 366 ++++++++++++++++++++++++
  3 files changed, 375 insertions(+)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 737edcdf9eef..fd1d7e6f536b 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -717,6 +717,14 @@ config DRM_PANEL_VISIONOX_RM69299
  	  Say Y here if you want to enable support for Visionox
  	  RM69299  DSI Video Mode panel.
+config DRM_PANEL_VISIONOX_VTDR6130
+	tristate "Visionox VTDR6130"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	help
+	  Say Y here if you want to enable support for Visionox
+	  VTDR6130 1080x2400 AMOLED DSI panel.
+
  config DRM_PANEL_WIDECHIPS_WS2401
  	tristate "Widechips WS2401 DPI panel driver"
  	depends on SPI && GPIOLIB
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index f8f9d9f6a307..1966404fcf7a 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -73,5 +73,6 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
  obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
  obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
  obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
+obj-$(CONFIG_DRM_PANEL_VISIONOX_VTDR6130) += panel-visionox-vtdr6130.o
  obj-$(CONFIG_DRM_PANEL_WIDECHIPS_WS2401) += panel-widechips-ws2401.o
  obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
new file mode 100644
index 000000000000..94ad2a32efc9
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2023, Linaro Limited
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/display/drm_dsc.h>
+#include <linux/regulator/consumer.h>
+
+struct visionox_vtdr6130 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data supplies[3];
+	bool prepared;
+};
+
+static inline struct visionox_vtdr6130 *to_visionox_vtdr6130(struct drm_panel *panel)
+{
+	return container_of(panel, struct visionox_vtdr6130, panel);
+}
+
+static inline int visionox_vtdr6130_dsi_write(struct mipi_dsi_device *dsi, const void *seq,
+					      size_t len)
+{
+	return mipi_dsi_dcs_write_buffer(dsi, seq, len);
+}
+
+#define dsi_dcs_write_seq(dsi, seq...)					\
+	{								\
+		const u8 d[] = { seq };					\
+		visionox_vtdr6130_dsi_write(dsi, d, ARRAY_SIZE(d));	\
+	}
+
+static void visionox_vtdr6130_reset(struct visionox_vtdr6130 *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+}
+
+static int visionox_vtdr6130_on(struct visionox_vtdr6130 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	dsi_dcs_write_seq(dsi, 0x03, 0x01);
+	dsi_dcs_write_seq(dsi, 0x35, 0x00);
+	dsi_dcs_write_seq(dsi, 0x53, 0x20);
+	dsi_dcs_write_seq(dsi, 0x51, 0x00, 0x00);
+	dsi_dcs_write_seq(dsi, 0x59, 0x09);
+	dsi_dcs_write_seq(dsi, 0x6c, 0x01);
+	dsi_dcs_write_seq(dsi, 0x6d, 0x00);
+	dsi_dcs_write_seq(dsi, 0x6f, 0x01);
+	dsi_dcs_write_seq(dsi, 0x70,
+			  0x12, 0x00, 0x00, 0xab, 0x30, 0x80, 0x09, 0x60, 0x04,
+			  0x38, 0x00, 0x28, 0x02, 0x1c, 0x02, 0x1c, 0x02, 0x00,
+			  0x02, 0x0e, 0x00, 0x20, 0x03, 0xdd, 0x00, 0x07, 0x00,
+			  0x0c, 0x02, 0x77, 0x02, 0x8b, 0x18, 0x00, 0x10, 0xf0,
+			  0x07, 0x10, 0x20, 0x00, 0x06, 0x0f, 0x0f, 0x33, 0x0e,
+			  0x1c, 0x2a, 0x38, 0x46, 0x54, 0x62, 0x69, 0x70, 0x77,
+			  0x79, 0x7b, 0x7d, 0x7e, 0x02, 0x02, 0x22, 0x00, 0x2a,
+			  0x40, 0x2a, 0xbe, 0x3a, 0xfc, 0x3a, 0xfa, 0x3a, 0xf8,
+			  0x3b, 0x38, 0x3b, 0x78, 0x3b, 0xb6, 0x4b, 0xb6, 0x4b,
+			  0xf4, 0x4b, 0xf4, 0x6c, 0x34, 0x84, 0x74, 0x00, 0x00,
+			  0x00, 0x00, 0x00, 0x00);
+	dsi_dcs_write_seq(dsi, 0xf0, 0xaa, 0x10);
+	dsi_dcs_write_seq(dsi, 0xb1,
+			  0x01, 0x38, 0x00, 0x14, 0x00, 0x1c, 0x00, 0x01, 0x66,
+			  0x00, 0x14, 0x00, 0x14, 0x00, 0x01, 0x66, 0x00, 0x14,
+			  0x05, 0xcc, 0x00);
+	dsi_dcs_write_seq(dsi, 0xf0, 0xaa, 0x13);
+	dsi_dcs_write_seq(dsi, 0xce,
+			  0x09, 0x11, 0x09, 0x11, 0x08, 0xc1, 0x07, 0xfa, 0x05,
+			  0xa4, 0x00, 0x3c, 0x00, 0x34, 0x00, 0x24, 0x00, 0x0c,
+			  0x00, 0x0c, 0x04, 0x00, 0x35);
+	dsi_dcs_write_seq(dsi, 0xf0, 0xaa, 0x14);
+	dsi_dcs_write_seq(dsi, 0xb2, 0x03, 0x33);
+	dsi_dcs_write_seq(dsi, 0xb4,
+			  0x00, 0x33, 0x00, 0x00, 0x00, 0x3e, 0x00, 0x00, 0x00,
+			  0x3e, 0x00, 0x00);
+	dsi_dcs_write_seq(dsi, 0xb5,
+			  0x00, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x06, 0x01);
+	dsi_dcs_write_seq(dsi, 0xb9, 0x00, 0x00, 0x08, 0x09, 0x09, 0x09);
+	dsi_dcs_write_seq(dsi, 0xbc,
+			  0x10, 0x00, 0x00, 0x06, 0x11, 0x09, 0x3b, 0x09, 0x47,
+			  0x09, 0x47, 0x00);
+	dsi_dcs_write_seq(dsi, 0xbe,
+			  0x10, 0x10, 0x00, 0x08, 0x22, 0x09, 0x19, 0x09, 0x25,
+			  0x09, 0x25, 0x00);
+	dsi_dcs_write_seq(dsi, 0xff, 0x5a, 0x80);
+	dsi_dcs_write_seq(dsi, 0x65, 0x14);
+	dsi_dcs_write_seq(dsi, 0xfa, 0x08, 0x08, 0x08);
+	dsi_dcs_write_seq(dsi, 0xff, 0x5a, 0x81);
+	dsi_dcs_write_seq(dsi, 0x65, 0x05);
+	dsi_dcs_write_seq(dsi, 0xf3, 0x0f);
+	dsi_dcs_write_seq(dsi, 0xf0, 0xaa, 0x00);
+	dsi_dcs_write_seq(dsi, 0xff, 0x5a, 0x82);
+	dsi_dcs_write_seq(dsi, 0xf9, 0x00);
+	dsi_dcs_write_seq(dsi, 0xff, 0x51, 0x83);
+	dsi_dcs_write_seq(dsi, 0x65, 0x04);
+	dsi_dcs_write_seq(dsi, 0xf8, 0x00);
+	dsi_dcs_write_seq(dsi, 0xff, 0x5a, 0x00);
+	dsi_dcs_write_seq(dsi, 0x65, 0x01);
+	dsi_dcs_write_seq(dsi, 0xf4, 0x9a);
+	dsi_dcs_write_seq(dsi, 0xff, 0x5a, 0x00);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(120);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display on: %d\n", ret);
+		return ret;
+	}
+	msleep(20);
+
+	return 0;
+}
+
+static int visionox_vtdr6130_off(struct visionox_vtdr6130 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display off: %d\n", ret);
+		return ret;
+	}
+	msleep(20);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(120);
+
+	return 0;
+}
+
+static int visionox_vtdr6130_prepare(struct drm_panel *panel)
+{
+	struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies),
+				    ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	visionox_vtdr6130_reset(ctx);
+
+	ret = visionox_vtdr6130_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+		return ret;
+	}
+
+	/* Explicitly disable DSC since compression is on by default on the panel */
+	mipi_dsi_compression_mode(ctx->dsi, false);
+
+	ctx->prepared = true;
+	return 0;
+}
+
+static int visionox_vtdr6130_unprepare(struct drm_panel *panel)
+{
+	struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (!ctx->prepared)
+		return 0;
+
+	ret = visionox_vtdr6130_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+
+	ctx->prepared = false;
+	return 0;
+}
+
+static const struct drm_display_mode visionox_vtdr6130_mode = {
+	.clock = (1080 + 20 + 2 + 20) * (2400 + 20 + 2 + 18) * 144 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 20,
+	.hsync_end = 1080 + 20 + 2,
+	.htotal = 1080 + 20 + 2 + 20,
+	.vdisplay = 2400,
+	.vsync_start = 2400 + 20,
+	.vsync_end = 2400 + 20 + 2,
+	.vtotal = 2400 + 20 + 2 + 18,
+	.width_mm = 0,
+	.height_mm = 0,
+};
+
+static int visionox_vtdr6130_get_modes(struct drm_panel *panel,
+				       struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &visionox_vtdr6130_mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs visionox_vtdr6130_panel_funcs = {
+	.prepare = visionox_vtdr6130_prepare,
+	.unprepare = visionox_vtdr6130_unprepare,
+	.get_modes = visionox_vtdr6130_get_modes,
+};
+
+static int visionox_vtdr6130_bl_update_status(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness = backlight_get_brightness(bl);
+	int ret;
+
+	ret = mipi_dsi_dcs_set_display_brightness(dsi, cpu_to_le16(brightness));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static const struct backlight_ops visionox_vtdr6130_bl_ops = {
+	.update_status = visionox_vtdr6130_bl_update_status,
+};
+
+static struct backlight_device *
+visionox_vtdr6130_create_backlight(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	const struct backlight_properties props = {
+		.type = BACKLIGHT_RAW,
+		.brightness = 4095,
+		.max_brightness = 4095,
+	};
+
+	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+					      &visionox_vtdr6130_bl_ops, &props);
+}
+
+static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct visionox_vtdr6130 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->supplies[0].supply = "vddio";
+	ctx->supplies[1].supply = "vci";
+	ctx->supplies[2].supply = "vdd";
+
+	ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	drm_panel_init(&ctx->panel, dev, &visionox_vtdr6130_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ctx->panel.backlight = visionox_vtdr6130_create_backlight(dsi);
+	if (IS_ERR(ctx->panel.backlight))
+		return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
+				     "Failed to create backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void visionox_vtdr6130_remove(struct mipi_dsi_device *dsi)
+{
+	struct visionox_vtdr6130 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id visionox_vtdr6130_of_match[] = {
+	{ .compatible = "visionox,vtdr6130" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, visionox_vtdr6130_of_match);
+
+static struct mipi_dsi_driver visionox_vtdr6130_driver = {
+	.probe = visionox_vtdr6130_probe,
+	.remove = visionox_vtdr6130_remove,
+	.driver = {
+		.name = "panel-visionox-vtdr6130",
+		.of_match_table = visionox_vtdr6130_of_match,
+	},
+};
+module_mipi_dsi_driver(visionox_vtdr6130_driver);
+
+MODULE_AUTHOR("Neil Armstron <neil.armstrong@xxxxxxxxxx>");

Missed a "g" here :-)

+MODULE_DESCRIPTION("Panel driver for the visionox VTDR6130 AMOLED DSI panel");

I am not sure how the company capitalises the name, but to keep it consistent with the other mentions, I think it should be "Visionox".

+MODULE_LICENSE("GPL");


--
Rayyan Ansari
https://ansari.sh




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux