There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use
that instead and delete the custom DSI write macro defined in the driver.
Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
---
.../gpu/drm/panel/panel-sharp-ls060t1sx01.c | 19 ++-----------------
1 file changed, 2 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c b/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
index 8a4e0c1fe73f..68f52eaaf4fa 100644
--- a/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
+++ b/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
@@ -32,12 +32,6 @@ static inline struct sharp_ls060 *to_sharp_ls060(struct drm_panel *panel)
return container_of(panel, struct sharp_ls060, panel);
}
-#define dsi_dcs_write_seq(dsi, seq...) ({ \
- static const u8 d[] = { seq }; \
- \
- mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
- })
-
static void sharp_ls060_reset(struct sharp_ls060 *ctx)
{
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
@@ -56,17 +50,8 @@ static int sharp_ls060_on(struct sharp_ls060 *ctx)
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
- ret = dsi_dcs_write_seq(dsi, 0xbb, 0x13);
- if (ret < 0) {
- dev_err(dev, "Failed to send command: %d\n", ret);
- return ret;
- }
-
- ret = dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
- if (ret < 0) {
- dev_err(dev, "Failed to send command: %d\n", ret);
- return ret;
- }
+ mipi_dsi_dcs_write_seq(dsi, 0xbb, 0x13);
+ mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
--
2.38.1
