Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit interface. Signed-off-by: Christophe Branchereau <cbranchereau@xxxxxxxxx> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> --- .../bindings/display/panel/auo,a030jtn01.yaml | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml new file mode 100644 index 000000000000..fb2aef0061e7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD panel + +description: | + The panel must obey the rules for a SPI slave device as specified in + spi/spi-controller.yaml + +maintainers: + - Paul Cercueil <paul@xxxxxxxxxxxxxxx> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: auo,a030jtn01 + + backlight: true + port: true + power-supply: true + reg: true + reset-gpios: true + +required: + - compatible + - reg + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + panel@0 { + compatible = "auo,a030jtn01"; + reg = <0>; + + spi-max-frequency = <10000000>; + + reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>; + power-supply = <&lcd_power>; + + backlight = <&backlight>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; -- 2.35.1
