From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Splitting the bridge chain fails for atomic bridges as the
framework can't add the relevant state in
drm_atomic_add_encoder_bridges.
The chain was split because we needed to power up before
calling pre_enable, but that is now done in mode_set, and will
move into the framework.
Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_dsi.c | 47 -------------------------------------------
1 file changed, 47 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index 607ebe368409..53d73a6590b7 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -557,7 +557,6 @@ struct vc4_dsi {
struct platform_device *pdev;
struct drm_bridge *out_bridge;
- struct list_head bridge_chain;
void __iomem *regs;
@@ -794,23 +793,9 @@ static void vc4_dsi_encoder_disable(struct drm_encoder *encoder)
{
struct vc4_dsi *dsi = to_vc4_dsi(encoder);
struct device *dev = &dsi->pdev->dev;
- struct drm_bridge *iter;
-
- list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) {
- if (iter->funcs->disable)
- iter->funcs->disable(iter);
-
- if (iter == dsi->out_bridge)
- break;
- }
vc4_dsi_ulps(dsi, true);
- list_for_each_entry_from(iter, &dsi->bridge_chain, chain_node) {
- if (iter->funcs->post_disable)
- iter->funcs->post_disable(iter);
- }
-
clk_disable_unprepare(dsi->pll_phy_clock);
clk_disable_unprepare(dsi->escape_clock);
clk_disable_unprepare(dsi->pixel_clock);
@@ -1111,12 +1096,6 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
{
struct vc4_dsi *dsi = to_vc4_dsi(encoder);
bool debug_dump_regs = false;
- struct drm_bridge *iter;
-
- list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) {
- if (iter->funcs->pre_enable)
- iter->funcs->pre_enable(iter);
- }
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
DSI_PORT_WRITE(DISP0_CTRL,
@@ -1133,11 +1112,6 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
DSI_DISP0_ENABLE);
}
- list_for_each_entry(iter, &dsi->bridge_chain, chain_node) {
- if (iter->funcs->enable)
- iter->funcs->enable(iter);
- }
-
if (debug_dump_regs) {
struct drm_printer p = drm_info_printer(&dsi->pdev->dev);
dev_info(&dsi->pdev->dev, "DSI regs after:\n");
@@ -1625,7 +1599,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
dsi->variant = of_device_get_match_data(dev);
- INIT_LIST_HEAD(&dsi->bridge_chain);
dsi->encoder.type = dsi->variant->port ?
VC4_ENCODER_TYPE_DSI1 : VC4_ENCODER_TYPE_DSI0;
@@ -1762,32 +1735,12 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
ret = drm_bridge_attach(encoder, dsi->out_bridge, NULL, 0);
if (ret)
return ret;
- /* Disable the atomic helper calls into the bridge. We
- * manually call the bridge pre_enable / enable / etc. calls
- * from our driver, since we need to sequence them within the
- * encoder's enable/disable paths.
- */
- list_splice_init(&encoder->bridge_chain, &dsi->bridge_chain);
return 0;
}
-static void vc4_dsi_unbind(struct device *dev, struct device *master,
- void *data)
-{
- struct vc4_dsi *dsi = dev_get_drvdata(dev);
- struct drm_encoder *encoder = &dsi->encoder.base;
-
- /*
- * Restore the bridge_chain so the bridge detach procedure can happen
- * normally.
- */
- list_splice_init(&dsi->bridge_chain, &encoder->bridge_chain);
-}
-
static const struct component_ops vc4_dsi_ops = {
.bind = vc4_dsi_bind,
- .unbind = vc4_dsi_unbind,
};
static int vc4_dsi_dev_probe(struct platform_device *pdev)
--
2.38.1
