Add nodes required for TSENS block using the common qcom,tsens-v2 binding.
Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6115.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 2a55087b103e..a2ac06f4693b 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -523,6 +523,17 @@ spmi_bus: spmi@1c40000 {
#interrupt-cells = <4>;
};
+ tsens0: thermal-sensor@4410000 {
+ compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
+ reg = <0x04411000 0x1ff>, /* TM */
+ <0x04410000 0x8>; /* SROT */
+ #qcom,sensors = <16>;
+ interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
rpm_msg_ram: sram@45f0000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x045f0000 0x7000>;
--
2.25.1
