Re: [PATCH v2 1/2] dt-bindings: display/msm: add support for SM6115

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 23, 2022 at 6:17 PM Adam Skladowski <a39.skl@xxxxxxxxx> wrote:
>
> Add DPU and MDSS schemas to describe MDSS and DPU blocks on the Qualcomm
> SM6115 platform.
> Configuration for DSI/PHY is shared with QCM2290 so compatibles are reused.
> Lack of dsi phy supply in example is intended
> due to fact on qcm2290, sm6115 and sm6125
> this phy is supplied via power domain, not regulator.
>
> Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
> ---
>  .../bindings/display/msm/qcom,sm6115-dpu.yaml |  94 +++++++++
>  .../display/msm/qcom,sm6115-mdss.yaml         | 182 ++++++++++++++++++
>  2 files changed, 276 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
> new file mode 100644
> index 000000000000..4a39a3031409
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
> @@ -0,0 +1,94 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display DPU dt properties for SM6115 target
> +
> +maintainers:
> +  - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> +
> +$ref: /schemas/display/msm/dpu-common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: qcom,sm6115-dpu
> +
> +  reg:
> +    items:
> +      - description: MDP register set
> +      - description: VBIF register set
> +
> +  reg-names:
> +    items:
> +      - const: mdp
> +      - const: vbif
> +
> +  clocks:
> +    items:
> +      - description: Display AXI
> +      - description: Display AHB
> +      - description: Display core
> +      - description: Display lut
> +      - description: Display rotator
> +      - description: Display vsync
> +
> +  clock-names:
> +    items:
> +      - const: bus
> +      - const: iface
> +      - const: core
> +      - const: lut
> +      - const: rot
> +      - const: vsync
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
> +    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    display-controller@5e01000 {
> +        compatible = "qcom,sm6115-dpu";
> +        reg = <0x05e01000 0x8f000>,
> +              <0x05eb0000 0x2008>;
> +        reg-names = "mdp", "vbif";
> +
> +        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> +                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
> +                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> +                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
> +                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> +        clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
> +
> +        operating-points-v2 = <&mdp_opp_table>;
> +        power-domains = <&rpmpd SM6115_VDDCX>;
> +
> +        interrupt-parent = <&mdss>;
> +        interrupts = <0>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                endpoint {
> +                    remote-endpoint = <&dsi0_in>;
> +                };
> +            };
> +        };
> +    };
> +...
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
> new file mode 100644
> index 000000000000..a86d7f53fa84
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
> @@ -0,0 +1,182 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SM6115 Display MDSS
> +
> +maintainers:
> +  - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> +
> +description:
> +  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
> +  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
> +  are mentioned for SM6115 target.
> +
> +$ref: /schemas/display/msm/mdss-common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: qcom,sm6115-mdss
> +
> +  clocks:
> +    items:
> +      - description: Display AHB clock from gcc
> +      - description: Display AXI clock
> +      - description: Display core clock
> +
> +  iommus:
> +    maxItems: 2
> +
> +patternProperties:
> +  "^display-controller@[0-9a-f]+$":
> +    type: object
> +    properties:
> +      compatible:
> +        const: qcom,sm6115-dpu
> +
> +  "^dsi@[0-9a-f]+$":
> +    type: object
> +    properties:
> +      compatible:
> +        const: qcom,dsi-ctrl-6g-qcm2290
> +
> +  "^phy@[0-9a-f]+$":
> +    type: object
> +    properties:
> +      compatible:
> +        const: qcom,dsi-phy-14nm-2290
> +
> +required:
> +  - compatible
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
> +    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
> +    #include <dt-bindings/clock/qcom,rpmcc.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    mdss@5e00000 {
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        compatible = "qcom,sm6115-mdss";
> +        reg = <0x05e00000 0x1000>;
> +        reg-names = "mdss";
> +        power-domains = <&dispcc MDSS_GDSC>;
> +        clocks = <&gcc GCC_DISP_AHB_CLK>,
> +                 <&gcc GCC_DISP_HF_AXI_CLK>,
> +                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
> +
> +        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-controller;
> +        #interrupt-cells = <1>;
> +
> +        iommus = <&apps_smmu 0x420 0x2>,
> +                 <&apps_smmu 0x421 0x0>;
> +        ranges;
> +
> +        display-controller@5e01000 {
> +            compatible = "qcom,sm6115-dpu";
> +            reg = <0x05e01000 0x8f000>,
> +                  <0x05eb0000 0x2008>;
> +            reg-names = "mdp", "vbif";
> +
> +            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> +                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
> +                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> +                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
> +                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> +            clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
> +
> +            operating-points-v2 = <&mdp_opp_table>;
> +            power-domains = <&rpmpd SM6115_VDDCX>;
> +
> +            interrupt-parent = <&mdss>;
> +            interrupts = <0>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    dpu_intf1_out: endpoint {
> +                        remote-endpoint = <&dsi0_in>;
> +                    };
> +                };
> +            };
> +        };
> +
> +        dsi@5e94000 {
> +            compatible = "qcom,dsi-ctrl-6g-qcm2290";
> +            reg = <0x05e94000 0x400>;
> +            reg-names = "dsi_ctrl";
> +
> +            interrupt-parent = <&mdss>;
> +            interrupts = <4>;
> +
> +            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> +                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> +                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> +                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> +                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                     <&gcc GCC_DISP_HF_AXI_CLK>;
> +            clock-names = "byte",
> +                          "byte_intf",
> +                          "pixel",
> +                          "core",
> +                          "iface",
> +                          "bus";
> +            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> +            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
> +
> +            operating-points-v2 = <&dsi_opp_table>;
> +            power-domains = <&rpmpd SM6115_VDDCX>;
> +            phys = <&dsi0_phy>;
> +
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    dsi0_in: endpoint {
> +                        remote-endpoint = <&dpu_intf1_out>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +                    dsi0_out: endpoint {
> +                    };
> +                };
> +            };
> +        };
> +
> +        dsi0_phy: phy@5e94400 {
> +            compatible = "qcom,dsi-phy-14nm-2290";

Now that this is in linux-next, there's a warning:

/builds/robherring/linux-dt/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.example.dtb:
phy@5e94400: 'vcca-supply' is a required property
        From schema:
/builds/robherring/linux-dt/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml

Perhaps some change in dsi-phy-14nm.yaml.

Rob



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux