Re: [PATCH v2 02/12] dt-bindings: display: msm: Add qcom, sm8350-mdss binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 15 Nov 2022 at 17:49, Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Tue, Nov 15, 2022 at 12:17:11PM +0100, Robert Foss wrote:
> > Mobile Display Subsystem (MDSS) encapsulates sub-blocks
> > like DPU display controller, DSI etc. Add YAML schema for MDSS device
> > tree bindings
> >
> > Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
> > ---
> >  .../display/msm/qcom,sm8350-mdss.yaml         | 240 ++++++++++++++++++
> >  1 file changed, 240 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
> > new file mode 100644
> > index 000000000000..9a0694853576
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
> > @@ -0,0 +1,240 @@
> > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm SM8350 Display MDSS
> > +
> > +maintainers:
> > +  - Robert Foss <robert.foss@xxxxxxxxxx>
> > +
> > +description:
> > +  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
>
> Drop 'Device tree bindings for '. Describe what this h/w is.

Ack

>
> > +  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
> > +  bindings of MDSS are mentioned for SM8350 target.
> > +
> > +$ref: /schemas/display/msm/mdss-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: qcom,sm8350-mdss
> > +
> > +  clocks:
> > +    items:
> > +      - description: Display AHB clock from gcc
> > +      - description: Display hf axi clock
> > +      - description: Display sf axi clock
> > +      - description: Display core clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: iface
> > +      - const: bus
> > +      - const: nrt_bus
> > +      - const: core
> > +
> > +  iommus:
> > +    maxItems: 1
> > +
> > +  interconnects:
> > +    maxItems: 2
> > +
> > +  interconnect-names:
> > +    maxItems: 2
>
> Need to define the names.
>
> > +
> > +patternProperties:
> > +  "^display-controller@[0-9a-f]+$":
> > +    type: object
> > +    properties:
> > +      compatible:
> > +        const: qcom,sm8350-dpu
> > +
> > +  "^dsi@[0-9a-f]+$":
> > +    type: object
> > +    properties:
> > +      compatible:
> > +        const: qcom,mdss-dsi-ctrl
> > +
> > +  "^phy@[0-9a-f]+$":
> > +    type: object
> > +    properties:
> > +      compatible:
> > +        const: qcom,dsi-phy-5nm-8350
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
> > +    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
> > +    #include <dt-bindings/clock/qcom,rpmh.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interconnect/qcom,sm8350.h>
> > +    #include <dt-bindings/power/qcom-rpmpd.h>
> > +
> > +    display-subsystem@ae00000 {
> > +        compatible = "qcom,sm8350-mdss";
> > +        reg = <0x0ae00000 0x1000>;
> > +        reg-names = "mdss";
> > +
> > +        interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> > +                        <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> > +        interconnect-names = "mdp0-mem", "mdp1-mem";
> > +
> > +        power-domains = <&dispcc MDSS_GDSC>;
> > +        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
> > +
> > +        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > +                 <&gcc GCC_DISP_HF_AXI_CLK>,
> > +                 <&gcc GCC_DISP_SF_AXI_CLK>,
> > +                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
> > +        clock-names = "iface", "bus", "nrt_bus", "core";
> > +
> > +        iommus = <&apps_smmu 0x820 0x402>;
> > +
> > +        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > +        interrupt-controller;
> > +        #interrupt-cells = <1>;
> > +
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
> > +        ranges;
> > +
> > +        display-controller@ae01000 {
> > +            compatible = "qcom,sm8350-dpu";
> > +            reg = <0x0ae01000 0x8f000>,
> > +                  <0x0aeb0000 0x2008>;
> > +            reg-names = "mdp", "vbif";
> > +
> > +            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> > +                     <&gcc GCC_DISP_SF_AXI_CLK>,
> > +                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > +                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> > +                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
> > +                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> > +            clock-names = "bus",
> > +                          "nrt_bus",
> > +                          "iface",
> > +                          "lut",
> > +                          "core",
> > +                          "vsync";
> > +
> > +            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> > +            assigned-clock-rates = <19200000>;
> > +
> > +            operating-points-v2 = <&mdp_opp_table>;
> > +            power-domains = <&rpmhpd SM8350_MMCX>;
> > +
> > +            interrupt-parent = <&mdss>;
> > +            interrupts = <0>;
> > +
> > +            ports {
> > +                #address-cells = <1>;
> > +                #size-cells = <0>;
> > +
> > +                port@0 {
> > +                    reg = <0>;
> > +                    dpu_intf1_out: endpoint {
> > +                        remote-endpoint = <&dsi0_in>;
> > +                    };
> > +                };
> > +            };
> > +
> > +            mdp_opp_table: opp-table {
> > +                compatible = "operating-points-v2";
> > +
> > +                opp-200000000 {
> > +                    opp-hz = /bits/ 64 <200000000>;
> > +                    required-opps = <&rpmhpd_opp_low_svs>;
> > +                };
> > +
> > +                opp-300000000 {
> > +                    opp-hz = /bits/ 64 <300000000>;
> > +                    required-opps = <&rpmhpd_opp_svs>;
> > +                };
> > +
> > +                opp-345000000 {
> > +                    opp-hz = /bits/ 64 <345000000>;
> > +                    required-opps = <&rpmhpd_opp_svs_l1>;
> > +                };
> > +
> > +                opp-460000000 {
> > +                    opp-hz = /bits/ 64 <460000000>;
> > +                    required-opps = <&rpmhpd_opp_nom>;
> > +                };
> > +            };
> > +        };
> > +
> > +        dsi0: dsi@ae94000 {
> > +            compatible = "qcom,mdss-dsi-ctrl";
> > +            reg = <0x0ae94000 0x400>;
> > +            reg-names = "dsi_ctrl";
> > +
> > +            interrupt-parent = <&mdss>;
> > +            interrupts = <4>;
> > +
> > +            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> > +                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> > +                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> > +                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> > +                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > +                     <&gcc GCC_DISP_HF_AXI_CLK>;
> > +            clock-names = "byte",
> > +                      "byte_intf",
> > +                      "pixel",
> > +                      "core",
> > +                      "iface",
> > +                      "bus";
> > +
> > +            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
> > +                          <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> > +            assigned-clock-parents = <&dsi0_phy 0>,
> > +                                 <&dsi0_phy 1>;
> > +
> > +            operating-points-v2 = <&dsi_opp_table>;
> > +            power-domains = <&rpmhpd SM8350_MMCX>;
> > +
> > +            phys = <&dsi0_phy>;
> > +            phy-names = "dsi";
> > +
> > +            ports {
> > +             #address-cells = <1>;
> > +                #size-cells = <0>;
> > +
> > +                port@0 {
> > +                    reg = <0>;
> > +                    dsi0_in: endpoint {
> > +                        remote-endpoint = <&dpu_intf1_out>;
> > +                    };
> > +                };
> > +
> > +                port@1 {
> > +                    reg = <1>;
> > +                    dsi0_out: endpoint {
> > +                    };
> > +                };
> > +            };
> > +        };
> > +
> > +        dsi0_phy: phy@ae94400 {
>
> I assume the phy has its own example somewhere else and its not really
> relevant to this binding. So drop.

Ack.

>
> > +            compatible = "qcom,dsi-phy-5nm-8350";
> > +            reg = <0x0ae94400 0x200>,
> > +                  <0x0ae94600 0x280>,
> > +                  <0x0ae94900 0x260>;
> > +            reg-names = "dsi_phy",
> > +                        "dsi_phy_lane",
> > +                        "dsi_pll";
> > +
> > +            #clock-cells = <1>;
> > +            #phy-cells = <0>;
> > +
> > +            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > +                     <&rpmhcc RPMH_CXO_CLK>;
> > +            clock-names = "iface", "ref";
> > +
> > +            vdds-supply = <&vreg_l5b_0p88>;
> > +        };
> > +    };
> > +...
> > --
> > 2.34.1
> >
> >



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux