[PATCH v2 7/7] drm/fb-helper: Don't use the preferred depth for the BPP default

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If no preferred value for bits-per-pixel has been given, fall back
to 32. Never use the preferred depth. The color depth is the number
of color/alpha bits per pixel, while bpp is the overall number of
bits in most cases.

Most noteworthy, XRGB8888 has a depth of 24 and a bpp value of 32.
Using depth for bpp would make the value 24 as well and format
selection in fbdev helpers fails. Unfortunately XRGB8888 is the most
common format and the old heuristic therefore fails for most of
the drivers (unless they implement the 24-bit RGB888 format).

Picking a bpp of 32 will later on result in a default depth of 24
and the format XRGB8888. As XRGB8888 is the default format for most
of the current and legacy graphics stack, all drivers must support
it. So it is the safe choice.

v2:
	* fix commit-message typo (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
Reviewed-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
Acked-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
---
 drivers/gpu/drm/drm_fbdev_generic.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_fbdev_generic.c b/drivers/gpu/drm/drm_fbdev_generic.c
index ab86956692795..0a4c160e0e58a 100644
--- a/drivers/gpu/drm/drm_fbdev_generic.c
+++ b/drivers/gpu/drm/drm_fbdev_generic.c
@@ -431,7 +431,6 @@ static const struct drm_client_funcs drm_fbdev_client_funcs = {
  * drm_fbdev_generic_setup() - Setup generic fbdev emulation
  * @dev: DRM device
  * @preferred_bpp: Preferred bits per pixel for the device.
- *                 @dev->mode_config.preferred_depth is used if this is zero.
  *
  * This function sets up generic fbdev emulation for drivers that supports
  * dumb buffers with a virtual address and that can be mmap'ed.
@@ -475,12 +474,16 @@ void drm_fbdev_generic_setup(struct drm_device *dev,
 	}
 
 	/*
-	 * FIXME: This mixes up depth with bpp, which results in a glorious
-	 * mess, resulting in some drivers picking wrong fbdev defaults and
-	 * others wrong preferred_depth defaults.
+	 * Pick a preferred bpp of 32 if no value has been given. This
+	 * will select XRGB8888 for the framebuffer formats. All drivers
+	 * have to support XRGB8888 for backwards compatibility with legacy
+	 * userspace, so it's the safe choice here.
+	 *
+	 * TODO: Replace struct drm_mode_config.preferred_depth and this
+	 *       bpp value with a preferred format that is given as struct
+	 *       drm_format_info. Then derive all other values from the
+	 *       format.
 	 */
-	if (!preferred_bpp)
-		preferred_bpp = dev->mode_config.preferred_depth;
 	if (!preferred_bpp)
 		preferred_bpp = 32;
 	fb_helper->preferred_bpp = preferred_bpp;
-- 
2.38.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux