From: Richard Leitner <richard.leitner@xxxxxxxxxxx>
Add InnoLux G070ACE-L01 7" 800x480 TFT LCD with WLED backlight panel
support. Timing data was extracted from datasheet and vendor provided
EDID file.
Signed-off-by: Richard Leitner <richard.leitner@xxxxxxxxxxx>
---
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: David Airlie <airlied@xxxxxxxxx>
Cc: Daniel Vetter <daniel@xxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
---
drivers/gpu/drm/panel/panel-simple.c | 35 ++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 2944228a8e2c..b2b5ec5839de 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2142,6 +2142,38 @@ static const struct panel_desc innolux_at070tn92 = {
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
+static const struct display_timing innolux_g070ace_l01_timing = {
+ .pixelclock = { 25200000, 35000000, 35700000 },
+ .hactive = { 800, 800, 800 },
+ .hfront_porch = { 30, 32, 87 },
+ .hback_porch = { 30, 32, 87 },
+ .hsync_len = { 1, 1, 1 },
+ .vactive = { 480, 480, 480 },
+ .vfront_porch = { 3, 3, 3 },
+ .vback_porch = { 13, 13, 13 },
+ .vsync_len = { 1, 1, 4 },
+ .flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc innolux_g070ace_l01 = {
+ .timings = &innolux_g070ace_l01_timing,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+ .delay = {
+ .prepare = 10,
+ .enable = 50,
+ .disable = 50,
+ .unprepare = 500,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH,
+ .connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
static const struct display_timing innolux_g070y2_l01_timing = {
.pixelclock = { 28000000, 29500000, 32000000 },
.hactive = { 800, 800, 800 },
@@ -4096,6 +4128,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "innolux,at070tn92",
.data = &innolux_at070tn92,
+ }, {
+ .compatible = "innolux,g070ace-l01",
+ .data = &innolux_g070ace_l01,
}, {
.compatible = "innolux,g070y2-l01",
.data = &innolux_g070y2_l01,
--
2.38.1
