Re: [PATCH 1/2] drm/vc4: hdmi: Enforce the minimum rate at runtime_resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Maxime,

Am 29.09.22 um 11:21 schrieb Maxime Ripard:
This is a revert of commit fd5894fa2413 ("drm/vc4: hdmi: Remove clock
rate initialization"), with the code slightly moved around.

It turns out that we can't downright remove that code from the driver,
since the Pi0-3 and Pi4 are in different cases, and it only works for
the Pi4.

Indeed, the commit mentioned above was relying on the RaspberryPi
firmware clocks driver to initialize the rate if it wasn't done by the
firmware. However, the Pi0-3 are using the clk-bcm2835 clock driver that
wasn't doing this initialization. We therefore end up with the clock not
being assigned a rate, and the CPU stalling when trying to access a
register.

We can't move that initialization in the clk-bcm2835 driver, since the
HSM clock we depend on is actually part of the HDMI power domain, so any
rate setup is only valid when the power domain is enabled. Thus, we
reinstated the minimum rate setup at runtime_suspend, which should
address both issues.

Link: https://lore.kernel.org/dri-devel/20220922145448.w3xfywkn5ecak2et@xxxxxxxxxxxxxx/
Fixes: fd5894fa2413 ("drm/vc4: hdmi: Remove clock rate initialization")
Reported-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
  drivers/gpu/drm/vc4/vc4_hdmi.c | 9 +++++++++
  1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 199bc398817f..2e28fe16ed5e 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -2891,6 +2891,15 @@ static int vc4_hdmi_runtime_resume(struct device *dev)
  	u32 __maybe_unused value;
  	int ret;
+ /*
+	 * The HSM clock is in the HDMI power domain, so we need to set
+	 * its frequency while the power domain is active so that it
+	 * keeps its rate.
+	 */
+	ret = clk_set_min_rate(vc4_hdmi->hsm_clock, HSM_MIN_CLOCK_FREQ);
+	if (ret)
+		return ret;
+

unfortunately this breaks X on Raspberry Pi 4 in Linux 6.0.5 (multi_v7_defconfig + LPAE). Today i saw this report [1] and bisected the issue down to this patch. Shame on me that i only tested this patch with Rpi 3B+ :-(

Best regards

[1] - https://bugzilla.suse.com/show_bug.cgi?id=1205259

  	ret = clk_prepare_enable(vc4_hdmi->hsm_clock);
  	if (ret)
  		return ret;




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux