Hi Xinlei,
Somehow b4 broke with your thread but I was able to apply patch 1 and
2 by hand.
Thanks
Matthias
On 24/10/2022 04:04, xinlei.lee@xxxxxxxxxxxx wrote:
> From: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>
>
> Base on the branch of linus/master v6.1 rc1.
>
> Change since v12:
> 1. Add MT8186_ prefix to variables added in mt8186-mmsys.h file.
>
> Change since v11:
> 1. Rebase on v6.1-rc1. Change nothing.
>
> Change since v10:
> 1. Modify patch title and add review tag.
>
> Change since v9:
> 1. Modify the location of the mmsys_dev member variable.
>
> Change since v8:
> 1. Modified the title and some description information.
>
> Changes since v7:
> 1. This series is based on the following patch:
> [1] soc: mediatek: Add mmsys func to adapt to dpi output for
> MT8186
>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/1663161662-1598-2-git-send-email-xinlei.lee@xxxxxxxxxxxx/__;!!CTRNKA9wMg0ARbw!3tXTL3P6SgcP8Q_rcyCro64dxIXE6VuVbcNftU0ZnX6TNtU1akXwd96YfnoJs_fEig$
>
> 2. Modify the DPI_FORMAT_MASK macro definition to GENMASK(1, 0);
> 3. Add all settings to mtk_mmsys_ddp_dpi_fmt_config;
> 4. Modify the commit title to Add mt8186 dpi compatibles and
> platform
> data.
>
> Changes since v6:
> 1. Different from other ICs, when mt8186 DPI changes the output
> format,
> the mmsys_base+400 register needs to be set to be valid at the same
> time.
> In this series, all the situations that mmsys need to be set up
> are
> perfected (not necessarily used in practice).
> 2. Put the value that controls the mmsys function in mtk-mmsys.h.
> 3. Encountered the sink ic switched between dual edge and single
> edge,
> perfected setting and clearing mmsys bit operations in mtk_dpi.c.
>
> Changes since v5:
> 1. Separate the patch that adds edge_cfg_in_mmsys from the patch
> that
> adds mt8186 dpi support.
> 2. Move the mmsys register definition to mmsys driver.
>
> Changes since v4:
> 1. This series of cancellations is based on the following patches:
> [1] Add MediaTek SoC(vdosys1) support for mt8195
>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/cover/20220711075245.10492-1-nancy.lin@xxxxxxxxxxxx/__;!!CTRNKA9wMg0ARbw!3tXTL3P6SgcP8Q_rcyCro64dxIXE6VuVbcNftU0ZnX6TNtU1akXwd96Yfnqv0_QYpg$
>
> [2] Add MediaTek SoC DRM (vdosys1) support for mt8195
>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/cover/20220804072827.22383-1-nancy.lin@xxxxxxxxxxxx/__;!!CTRNKA9wMg0ARbw!3tXTL3P6SgcP8Q_rcyCro64dxIXE6VuVbcNftU0ZnX6TNtU1akXwd96YfnoZMZ_peA$
>
> 2. Added mtk_mmsys_update_bits function in mtk-mmsys.c;
> 3. MMSYS 0x400 register is modified to
> MT8186_MMSYS_DPI_OUTPUT_FORMAT;
> 4. Fix formatting issues.
>
> Changes since v3:
> 1. Fix formatting issues;
> 2. Modify the edge output control name & description;
> 3. Fix the threading problem.
>
> Changes since v2:
> 1. Modify key nouns in the description;
> 2. Add the label of jitao to Co-developed-by;
> 3. Macro definition address lowercase problem and function naming;
> 4. Add missing a description of this property in the mtk_dpi_conf.
>
> Change since v1:
> 1. Modify mt8186 compatiable location.
> 2. Modify MT8186_DPI_OUTPUT_FORMAT name.
>
> When MT8186 outputs dpi signal, it is necessary to add dual edge
> output
> format control in mmsys.
>
> Xinlei Lee (3):
> soc: mediatek: Add all settings to mtk_mmsys_ddp_dpi_fmt_config
> func
> drm: mediatek: Set dpi format in mmsys
> drm: mediatek: Add mt8186 dpi compatibles and platform data
>
> drivers/gpu/drm/mediatek/mtk_dpi.c | 32
> ++++++++++++++++++++++++++
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
> drivers/soc/mediatek/mt8186-mmsys.h | 8 ++++---
> drivers/soc/mediatek/mtk-mmsys.c | 27 +++++++++++++++++--
> ---
> include/linux/soc/mediatek/mtk-mmsys.h | 7 ++++++
> 5 files changed, 67 insertions(+), 9 deletions(-)
>
