Hi, I'm facing a couple of issues when testing KUnit with the i915 driver. The DRM subsystem and the i915 driver has, for a long time, his own way to do unit tests, which seems to be added before KUnit. I'm now checking if it is worth start using KUnit at i915. So, I wrote a RFC with some patches adding support for the tests we have to be reported using Kernel TAP and KUnit. There are basically 3 groups of tests there: - mock tests - check i915 hardware-independent logic; - live tests - run some hardware-specific tests; - perf tests - check perf support - also hardware-dependent. As they depend on i915 driver, they run only on x86, with PCI stack enabled, but the mock tests run nicely via qemu. The live and perf tests require a real hardware. As we run them together with our CI, which, among other things, test module unload/reload and test loading i915 driver with different modprobe parameters, the KUnit tests should be able to run as a module. While testing KUnit, I noticed a couple of issues: 1. kunit.py parser is currently broken when used with modules the parser expects "TAP version xx" output, but this won't happen when loading the kunit test driver. Are there any plans or patches fixing this issue? 2. current->mm is not initialized Some tests do mmap(). They need the mm user context to be initialized, but this is not happening right now. Are there a way to properly initialize it for KUnit? 3. there's no test filters for modules In order to be able to do proper CI automation, it is needed to be able to control what tests will run or not. That's specially interesting at development time where some tests may not apply or not run properly on new hardware. Are there any plans to add support for it at kunit_test_suites() when the driver is built as module? Ideally, the best would be to export a per-module filter_glob parameter on such cases. 4. there are actually 3 levels of tests on i915: - Level 1: mock, live, perf - Level 2: test group (mmap, fences, ...) - Level 3: unit tests Currently, KUnit seems to have just two levels (test suite and tests). Are there a way to add test groups there? Regards, Mauro Forwarded message: Date: Thu, 3 Nov 2022 14:51:38 +0000 From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> To: Cc: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>, linux-kselftest@xxxxxxxxxxxxxxx, Michał Winiarski <michal.winiarski@xxxxxxxxx>, dri-devel@xxxxxxxxxxxxxxxxxxxxx, intel-gfx@xxxxxxxxxxxxxxxxxxxxx, Daniel Latypov <dlatypov@xxxxxxxxxx>, linux-kernel@xxxxxxxxxxxxxxx, igt-dev@xxxxxxxxxxxxxxxxxxxxx, Matthew Auld <matthew.auld@xxxxxxxxx>, Daniel Vetter <daniel@xxxxxxxx>, Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>, skhan@xxxxxxxxxxxxxxxxxxx, Isabella Basso <isabbasso@xxxxxxxxxx>, David Airlie <airlied@xxxxxxxxx>, Christian König <christian.koenig@xxxxxxx> Subject: [igt-dev] [PATCH RFC v2 8/8] drm/i915: check if current->mm is not NULL The mmap tests require mm in order to work. Failing to do that will cause a crash: [ 316.820722] BUG: kernel NULL pointer dereference, address: 00000000000000e8 [ 316.822517] #PF: supervisor write access in kernel mode [ 316.823430] #PF: error_code(0x0002) - not-present page [ 316.824390] PGD 0 P4D 0 [ 316.825357] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 316.826350] CPU: 0 PID: 1517 Comm: kunit_try_catch Tainted: G U N 6.1.0-rc2-drm-266703e6f163+ #14 [ 316.827503] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake Y LPDDR4x T4 Crb, BIOS TGLSFWI1.R00.3243.A01.2006102133 06/10/2020 [ 316.828633] RIP: 0010:down_write_killable+0x50/0x110 [ 316.829756] Code: 24 10 45 31 c9 31 c9 41 b8 01 00 00 00 31 d2 31 f6 48 89 ef e8 e1 74 4a ff bf 01 00 00 00 e8 87 d6 46 ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 0f 94 c0 5a 84 c0 74 62 8b 05 49 12 e4 00 85 c0 74 [ 316.830896] RSP: 0018:ffffc90001eabc58 EFLAGS: 00010246 [ 316.832008] RAX: 0000000000000000 RBX: 00000000000000e8 RCX: 0000000000000000 [ 316.833141] RDX: 0000000000000001 RSI: ffffffff81c94fc9 RDI: ffffffff81c94fc9 [ 316.834195] RBP: 0000000000000158 R08: 0000000000000001 R09: 0000000000000000 [ 316.835231] R10: 0000000000000000 R11: ffff8883a13350b8 R12: 0000000000000002 [ 316.836259] R13: 0000000000000001 R14: 0000000000100000 R15: 00000000000000e8 [ 316.837237] FS: 0000000000000000(0000) GS:ffff8883a3800000(0000) knlGS:0000000000000000 [ 316.838214] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 316.839190] CR2: 00000000000000e8 CR3: 0000000002812003 CR4: 0000000000770ef0 [ 316.840147] PKRU: 55555554 [ 316.841099] Call Trace: [ 316.842047] <TASK> [ 316.842990] ? vm_mmap_pgoff+0x78/0x150 [ 316.843936] vm_mmap_pgoff+0x78/0x150 [ 316.844884] igt_mmap_offset+0x178/0x1b9 [i915] [ 316.846119] __igt_mmap+0xfe/0x680 [i915] Unfortunately, when KUnit module runs, it doesn't create an user context, causing mmap tests to fail. Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> --- To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH RFC v2 0/8] at: https://lore.kernel.org/all/cover.1667486144.git.mchehab@xxxxxxxxxx/ drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c b/drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c index add5ae56cd89..2c5f93e946b5 100644 --- a/drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c +++ b/drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c @@ -1845,6 +1845,11 @@ int i915_gem_mman_live_selftests(struct drm_i915_private *i915) SUBTEST(igt_mmap_gpu), }; + if (!current->mm) { + pr_err("Test called without an user context!\n"); + return -EINVAL; + } + return i915_live_subtests(tests, i915); } EXPORT_SYMBOL_NS_GPL(i915_gem_mman_live_selftests, I915_SELFTEST); -- 2.38.1
