The hardware path of vdosys1 with DPTx output need to go through by several modules, such as, OVL_ADAPTOR and MERGE.
Add mmsys and mutex modules support by the patches below:
Changes in v27:
- rebase to next-20221102
- change mmsys compatible for mt8195 vdosys1
- base on jason's series[ref 1]
- fix reviewer comment
- only register mmsys reset controller if num_resets > 0
Changes in v26:
- fix reviewer comment
- set mmsys num_resets to 32 for 8192
- rebase to next-20220819
Changes in v25:
- fix reviewer comment
- refine mtk_mmsys_reset_update func
- rebase to next-20220708
Changes in v24:
- fix reviewer comment
- refine mtk_mmsys_reset_update func
- rebase to next-20220622
Changes in v23:
- separate[7] mmsys/mutex and drm patches into two series
Changes in v22:
- rebase to next-20220525
- rebase to vdosys0 series v22
- separate dts to a new patch
Changes in v21:
- fix reviewer comment
- fix rdma and ethdr binding doc and dts
Changes in v20:
- fix reviewer comment
- update mmsys update bit api name
- add mtk_mmsys_update_bits error message if lose gce property
- list all mt8195 vdosys1 reset bits
Changes in v19:
- fix reviewer comment
- separate mt8195 mmsys component to a new patch
- separate mt8195 vdo0 and vdo1 routing table
- separate mmsys_write_reg api to a new patch and simplify write reg code
- separate mmsys 64 bit reset to a new patch
- separate mtk-mutex dp_intf1 component to a new patch
Changes in v18:
- fix reviewer comment
- fix rdma binding doc
- fix ethdr binding doc
- refine mmsys config cmdq support
- refine merge reset control flow, get reset control in probe function
- add ethdr reset control error handling and remove dbg log
- rebase to vdosys0 series v20 (ref [5])
Changes in v17:
- fix reviewer comment in v16
- separate ovl adaptor comp in mtk-mmsys and mtk-mutex
- separate mmsys config API
- move mdp_rdma binding yaml
- fix ovl adaptor pm runtime get sync timing issue
- rebase to vdosys0 series v19 (ref [5])
- rebase to [7] for modify vblank register change
Changes in v16:
- fix reviewer comment in v 15
- fix mtk_drm_ddp_comp.c alignment
- fix vdosys0 mmsys num before adding vdosys1 patch
Changes in v15:
- fix ethdr uppercase hex number in dts
Changes in v14:
- remove MTK_MMSYS 64 bit dependency
- add ethdr.yaml back and fix dt_schema check fail
Resend v13
- add related maintainer in maillist
Changes in v13:
- fix reviewer comment in v12
- fix rdma dt-binding format
- fix dts node naming
- fix 32 bit build error
- modify 64bit dependency for mtk-mmsys
- rebase to vdosys0 series v16. (ref [5])
Changes in v12:
- fix reviewer comment in v11
- modify mbox index
- refine dma dev for ovl_adaptor sub driver
Changes in v11:
- remove ethdr vblank spin lock
- refine ovl_adaptor print message
Changes in v10:
- refine ethdr reset control using devm_reset_control_array_get_optional_exclusive
- fix ovl_adaptor mtk_ovl_adaptor_clk_enable error handle issue
Changes in v9:
- rebase on kernel-5.16-rc1
- rebase on vdosys0 series v13. (ref [5])
- fix ovl_adaptor sub driver is brought up unintentionally
- fix clang build test fail- duplicate ethdr/mdp_rdma init_module/cleanup_module symbol issue
Changes in v8:
- separate merge async reset to new patch.
- separate drm ovl_adaptor sub driver to new patch.
- fix reviewer comment in v7.
Changes in v7:
- rebase on vdosys0 series v12 (ref[5])
- add dma description in ethdr binding document.
- refine vdosys1 bit definition of mmsys routing table.
- separate merge modification into 3 pathces.
- separate mutex modification into 2 patches.
- add plane color coding for mdp_rdma csc.
- move mdp_rdma pm control to ovl_adaptor.
- fix reviewer comment in v6.
Changes in v6:
- rebase on kernel-5.15-rc1.
- change mbox label to gce0 for dts node of vdosys1.
- modify mmsys reset num for mt8195.
- rebase on vdosys0 series v10. (ref [5])
- use drm to bring up ovl_adaptor driver.
- move drm iommu/mutex check from kms init to drm bind.
- modify rdma binding doc location. (Documentation/devicetree/bindings/arm/)
- modify for reviewer's comment in v5.
Changes in v5:
- add mmsys reset controller reference.
Changes in v4:
- use merge common driver for merge1~4.
- refine ovl_adaptor rdma driver.
- use ovl_adaptor ddp_comp function instead of ethdr.
- modify for reviewer's comment in v3.
Changes in v3:
- modify for reviewer's comment in v2.
- add vdosys1 2 pixels align limit.
- add mixer odd offset support.
Changes in v2:
- Merge PSEUDO_OVL and ETHDR into one DRM component.
- Add mmsys config API for vdosys1 hardware setting.
- Add mmsys reset control using linux reset framework.
Signed-off-by: Nancy.Lin <nancy.lin@xxxxxxxxxxxx>
This series are based on the following patch:
[1] Change mmsys compatible for mt8195 mediatek-drm
20220927152704.12018-1-jason-jh.lin@xxxxxxxxxxxx
Nancy.Lin (11):
dt-bindings: arm: mediatek: mmsys: add vdosys1 compatible for MT8195
dt-bindings: reset: mt8195: add vdosys1 reset control bit
soc: mediatek: add mtk-mmsys ethdr and mdp_rdma components
soc: mediatek: add mtk-mmsys support for mt8195 vdosys1
soc: mediatek: refine code to use mtk_mmsys_update_bits API
soc: mediatek: add mtk-mmsys config API for mt8195 vdosys1
soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195
vdosys1
soc: mediatek: mmsys: add mmsys for support 64 reset bits
soc: mediatek: mmsys: add reset control for MT8195 vdosys1
soc: mediatek: add mtk-mutex component - dp_intf1
soc: mediatek: add mtk-mutex support for mt8195 vdosys1
.../bindings/arm/mediatek/mediatek,mmsys.yaml | 4 +-
drivers/soc/mediatek/mt8195-mmsys.h | 146 ++++++++++++++++++
drivers/soc/mediatek/mtk-mmsys.c | 145 ++++++++++++-----
drivers/soc/mediatek/mtk-mmsys.h | 1 +
drivers/soc/mediatek/mtk-mutex.c | 37 +++++
include/dt-bindings/reset/mt8195-resets.h | 45 ++++++
include/linux/soc/mediatek/mtk-mmsys.h | 25 +++
7 files changed, 366 insertions(+), 37 deletions(-)
--
2.18.0
