RE: [PATCH 08/10] vfio-iommufd: Support iommufd for emulated VFIO devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Jason Gunthorpe <jgg@xxxxxxxxxx>
> Sent: Wednesday, October 26, 2022 2:51 AM
> 
> Emulated VFIO devices are calling vfio_register_emulated_iommu_dev() and
> consist of all the mdev drivers.
> 
> Like the physical drivers, support for iommufd is provided by the driver
> supplying the correct correct standard ops. Provide ops from the core that
> duplicate what vfio_register_emulated_iommu_dev() does.
> 
> Emulated drivers are where it is more likely to see variation in the
> iommfd support ops. For instance IDXD will probably need to setup both a
> iommfd_device context linked to a PASID and an iommufd_access context to
> support all their mdev operations.
> 
> Signed-off-by: Jason Gunthorpe <jgg@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/gvt/kvmgt.c  |   3 +
>  drivers/s390/cio/vfio_ccw_ops.c   |   3 +
>  drivers/s390/crypto/vfio_ap_ops.c |   3 +
>  drivers/vfio/container.c          | 108 ++++++-----------------------
>  drivers/vfio/iommufd.c            |  57 ++++++++++++++++
>  drivers/vfio/vfio.h               |  10 ++-
>  drivers/vfio/vfio_main.c          | 110 +++++++++++++++++++++++++++++-
>  include/linux/vfio.h              |  14 ++++
>  8 files changed, 217 insertions(+), 91 deletions(-)

mtty, mdpy and mbochs?

> diff --git a/drivers/vfio/container.c b/drivers/vfio/container.c
> index 8772dad6808539..0388f2e33447eb 100644
> --- a/drivers/vfio/container.c
> +++ b/drivers/vfio/container.c
> @@ -540,113 +540,45 @@ void vfio_group_unuse_container(struct
> vfio_group *group)
>  	fput(group->opened_file);
>  }
> 
> -/*
> - * Pin contiguous user pages and return their associated host pages for local
> - * domain only.
> - * @device [in]  : device
> - * @iova [in]    : starting IOVA of user pages to be pinned.
> - * @npage [in]   : count of pages to be pinned.  This count should not
> - *		   be greater than VFIO_PIN_PAGES_MAX_ENTRIES.
> - * @prot [in]    : protection flags
> - * @pages[out]   : array of host pages
> - * Return error or number of pages pinned.
> - *
> - * A driver may only call this function if the vfio_device was created
> - * by vfio_register_emulated_iommu_dev().
> - */
> -int vfio_pin_pages(struct vfio_device *device, dma_addr_t iova,
> -		   int npage, int prot, struct page **pages)
> +int vfio_container_pin_pages(struct vfio_container *container,
> +			     struct iommu_group *iommu_group, dma_addr_t
> iova,
> +			     int npage, int prot, struct page **pages)
>  {
> -	struct vfio_container *container;
> -	struct vfio_group *group = device->group;
> -	struct vfio_iommu_driver *driver;
> -	int ret;
> -
> -	if (!pages || !npage || !vfio_assert_device_open(device))
> -		return -EINVAL;
> +	/* group->container cannot change while a vfio device is open */
> +	struct vfio_iommu_driver *driver = container->iommu_driver;
> 
>  	if (npage > VFIO_PIN_PAGES_MAX_ENTRIES)
>  		return -E2BIG;
> 
>  	/* group->container cannot change while a vfio device is open */
> -	container = group->container;
>  	driver = container->iommu_driver;

duplicated comment and assignment.

Actually, I'm not sure whether the comment should be put within this
container helper and other two. There is no group reference in these
helpers then it sounds like the comment makes more sense to be in the
caller side?

> +void vfio_unpin_pages(struct vfio_device *device, dma_addr_t iova, int
> npage)
> +{
> +	if (WARN_ON(!vfio_assert_device_open(device)))
> +		return;
> +
> +	if (device->group->container) {
> +		vfio_container_unpin_pages(device->group->container, iova,
> +					   npage);
> +	} else if (device->iommufd_access) {

be consistent with other two helpers i.e. if-if instead of if-else

> +		if (WARN_ON(iova > ULONG_MAX))
> +			return;

Is there a reason why this is a WARN_ON only in unpin but not in pin?

> +int vfio_dma_rw(struct vfio_device *device, dma_addr_t iova, void *data,
> +		size_t len, bool write)
> +{
> +	if (!data || len <= 0 || !vfio_assert_device_open(device))
> +		return -EINVAL;
> +
> +	if (device->group->container)
> +		return vfio_container_dma_rw(device->group->container,
> iova,
> +					     data, len, write);
> +
> +	if (device->iommufd_access) {
> +		unsigned int flags = 0;
> +
> +		if (iova > ULONG_MAX)
> +			return -EINVAL;
> +
> +		/* VFIO historically tries to auto-detect a kthread */
> +		if (!current->mm)
> +			flags |= IOMMUFD_ACCESS_RW_KTHREAD;

Can you elaborate why this cannot be put in iommufd as the default
policy similar to what vfio container does?





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux