Re: [RFC PATCH 1/3] drm: Introduce color fill properties for drm plane

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 01/11/2022 01:24, Jessica Zhang wrote:


On 10/29/2022 5:08 AM, Dmitry Baryshkov wrote:
On 29/10/2022 01:59, Jessica Zhang wrote:
Add support for COLOR_FILL and COLOR_FILL_FORMAT properties for
drm_plane. In addition, add support for setting and getting the values
of these properties.

COLOR_FILL represents the color fill of a plane while COLOR_FILL_FORMAT
represents the format of the color fill. Userspace can set enable solid
fill on a plane by assigning COLOR_FILL to a uint64_t value, assigning
the COLOR_FILL_FORMAT property to a uint32_t value, and setting the
framebuffer to NULL.

Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx> >
Planes report supported formats using the drm_mode_getplane(). You'd also need to tell userspace, which formats are supported for color fill. I don't think one supports e.g. YV12.

Hey Dmitry,

Good point. Forgot to add this in the patch [3/3] commit message, but FWIW MSM DPU devices only support the RGB format variants [1].

[1] https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c#L697

Ack. So you'd need to tell this to userspace.



A bit of generic comment for the discussion (this is an RFC anyway). Using color_fill/color_fill_format properties sounds simple, but this might be not generic enough. Limiting color_fill to 32 bits would prevent anybody from using floating point formats (e.g. DRM_FORMAT_XRGB16161616F, 64-bit value). Yes, this can be solved with e.g. using 64-bit for the color_fill value, but then this doesn't sound extensible too much.

Hm... I can definitely change color_fill to use u64 instead. As for making it more extensible, do you have any suggestions?

No. Not u64. It is a blob. Basically because when designing API you can not guarantee that all fill values would fit into u64. Also see below.



So, a question for other hardware maintainers. Do we have hardware that supports such 'color filled' planes? Do we want to support format modifiers for filling color/data? Because what I have in mind is closer to the blob structure, which can then be used for filling the plane:

struct color_fill_blob {
     u32 pixel_format;
     u64 modifiers4];
     u32 pixel_data_size; // fixme: is this necessary?
     u8 pixel_data[];
};

Just a question about this blob struct -- what is the purpose of pixel_data?

At least for devices using the DPU driver, the only data needed to enable solid fill is color_fill and color_fill_format. I'd also be interested in knowing if there are other drivers support a similar feature and what is needed for them.

Yes. You are thinking from the DPU point of view. ARGB only. However as we are adding generic API, we should not limit ourselves to it. Other deivces might support other formats of fill data. For example using YUY2/UYVY for filling the plane. And such YUV data is not a colour anymore. It is a pixel data, just as I named it.

Another hardware might support some fill patterns. Or e.g. passing a compressed texels/macrotiles. So, pixel data. Note, I've added format modifiers. Maybe `u64 modifiers[4]` is an overkill, as we have just a single data plane. Maybe just `u64 modifier` would be enough.



And then... This sounds a lot like a custom framebuffer.

So, maybe what should we do instead is to add new DRM_MODE_FB_COLOR_FILL flag to the framebuffers, which would e.g. mean that the FB gets stamped all over the plane. This would also save us from changing if (!fb) checks all over the drm core.

JFYI we did originally consider using a custom 1x1 FB to for color fill [1], but decided to go with a plane property instead. IIRC the conclusion was that having color fill as a plane property is a cleaner solution.

As for creating a new blob struct to hold all color fill info, I'm open to implementing that over having 2 separate properties.

[1] https://oftc.irclog.whitequark.org/dri-devel/2022-09-23#31409842

Let me cite the conclusion form the IRC chat: `22:20 <robclark> abhinav__: kinda.. the proposal was that userspace creates a blob property with the solid fill color, and then attaches the blob-prop id to the plane's FB_ID`.

It's not a pair of properties. It is a blob, because it is not that limited as the pair of range properties is.

I will reread the log later, but just my 2c. Attaching the blob property as the FB_ID might confuse userspace. I'd be slightly biased to being more conservative here. However as the final proposal was to attach the blob ID, let's do it this way.



Another approach might be using a format modifier instead of the FB flag.
I like the idea of having a format modifier denoting if the driver supports color_fill for that specific format. This would allow userspace to know which formats are supported by solid fill planes.

Yes, exactly. It would come in a natural way.

[Rumbling: and then it's natural to have the fill data in FB. Dull mode off.]

--
With best wishes
Dmitry




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux