[PATCH v5 3/7] firmware: raspberrypi: Provide a helper to query a clock max rate

[Maxime Ripard <maxime@xxxxxxxxxx>]

The firmware allows to query for its clocks the operating range of a
given clock. We'll need this for some drivers (KMS, in particular) to
infer the state of some configuration options, so let's create a
function to do so.

Acked-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 drivers/firmware/raspberrypi.c             | 20 ++++++++++++++++++++
 include/soc/bcm2835/raspberrypi-firmware.h | 26 ++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)

diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
index 932a8bef22fb..b15aa6fce0e9 100644
--- a/drivers/firmware/raspberrypi.c
+++ b/drivers/firmware/raspberrypi.c
@@ -228,6 +228,26 @@ static void rpi_register_clk_driver(struct device *dev)
 						-1, NULL, 0);
 }
 
+unsigned int rpi_firmware_clk_get_max_rate(struct rpi_firmware *fw, unsigned int id)
+{
+	struct rpi_firmware_clk_rate_request msg =
+		RPI_FIRMWARE_CLK_RATE_REQUEST(id);
+	int ret;
+
+	ret = rpi_firmware_property(fw, RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
+				    &msg, sizeof(msg));
+	if (ret)
+		/*
+		 * If our firmware doesn't support that operation, or fails, we
+		 * assume the maximum clock rate is absolute maximum we can
+		 * store over our type.
+		 */
+		 return UINT_MAX;
+
+	return le32_to_cpu(msg.rate);
+}
+EXPORT_SYMBOL_GPL(rpi_firmware_clk_get_max_rate);
+
 static void rpi_firmware_delete(struct kref *kref)
 {
 	struct rpi_firmware *fw = container_of(kref, struct rpi_firmware,
diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index 9b1db12d013f..ab955591cb72 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -155,12 +155,32 @@ enum rpi_firmware_clk_id {
 	RPI_FIRMWARE_NUM_CLK_ID,
 };
 
+/**
+ * struct rpi_firmware_clk_rate_request - Firmware Request for a rate
+ * @id:	ID of the clock being queried
+ * @rate: Rate in Hertz. Set by the firmware.
+ *
+ * Used by @RPI_FIRMWARE_GET_CLOCK_RATE, @RPI_FIRMWARE_GET_CLOCK_MEASURED,
+ * @RPI_FIRMWARE_GET_MAX_CLOCK_RATE and @RPI_FIRMWARE_GET_MIN_CLOCK_RATE.
+ */
+struct rpi_firmware_clk_rate_request {
+	__le32 id;
+	__le32 rate;
+} __packed;
+
+#define RPI_FIRMWARE_CLK_RATE_REQUEST(_id)	\
+	{					\
+		.id = _id,			\
+	}
+
 #if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE)
 int rpi_firmware_property(struct rpi_firmware *fw,
 			  u32 tag, void *data, size_t len);
 int rpi_firmware_property_list(struct rpi_firmware *fw,
 			       void *data, size_t tag_size);
 void rpi_firmware_put(struct rpi_firmware *fw);
+unsigned int rpi_firmware_clk_get_max_rate(struct rpi_firmware *fw,
+					   unsigned int id);
 struct device_node *rpi_firmware_find_node(void);
 struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node);
 struct rpi_firmware *devm_rpi_firmware_get(struct device *dev,
@@ -180,6 +200,12 @@ static inline int rpi_firmware_property_list(struct rpi_firmware *fw,
 
 static inline void rpi_firmware_put(struct rpi_firmware *fw) { }
 
+static inline unsigned int rpi_firmware_clk_get_max_rate(struct rpi_firmware *fw,
+							 unsigned int id)
+{
+	return UINT_MAX;
+}
+
 static inline struct device_node *rpi_firmware_find_node(void)
 {
 	return NULL;

-- 
b4 0.11.0-dev-99e3a