Hi Marek,
On 22-10-26, Marek Vasut wrote:
> In case the LCDIFv3 is used to drive a 4k panel via i.MX8MP HDMI bridge,
> the LCDIFv3 becomes susceptible to FIFO underflows, which lead to nasty
> flicker of the image on the panel, or image being shifted by half frame
> horizontally every second frame. The flicker can be easily triggered by
> running 3D application on top of weston compositor, like neverball or
> chromium. Surprisingly glmark2-es2-wayland or glmark2-es2-drm does not
> trigger this effect so easily.
>
> Configure the FIFO Panic threshold register and enable the FIFO Panic
> mode, which internally boosts the NoC interconnect priority for LCDIFv3
> transactions in case of possible underflow. This mitigates the flicker
> effect on 4k panels as well.
>
> Fixes: 9db35bb349a0 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
> Signed-off-by: Marek Vasut <marex@xxxxxxx>
> ---
> Cc: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: Liu Ying <victor.liu@xxxxxxx>
> Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Cc: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> Cc: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
> Cc: Peng Fan <peng.fan@xxxxxxx>
> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mxsfb/lcdif_kms.c | 15 +++++++++++++++
> drivers/gpu/drm/mxsfb/lcdif_regs.h | 1 +
> 2 files changed, 16 insertions(+)
>
> diff --git a/drivers/gpu/drm/mxsfb/lcdif_kms.c b/drivers/gpu/drm/mxsfb/lcdif_kms.c
> index a5302006c02cd..aee7babb5fa5c 100644
> --- a/drivers/gpu/drm/mxsfb/lcdif_kms.c
> +++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c
> @@ -341,6 +341,18 @@ static void lcdif_enable_controller(struct lcdif_drm_private *lcdif)
> reg = readl(lcdif->base + LCDC_V8_CTRLDESCL0_5);
> reg |= CTRLDESCL0_5_EN;
> writel(reg, lcdif->base + LCDC_V8_CTRLDESCL0_5);
> +
> + /* Set FIFO Panic watermarks, low 1/3, high 2/3 . */
> + writel(FIELD_PREP(PANIC0_THRES_LOW_MASK, 1 * PANIC0_THRES_RANGE / 3) |
> + FIELD_PREP(PANIC0_THRES_HIGH_MASK, 2 * PANIC0_THRES_RANGE / 3),
> + lcdif->base + LCDC_V8_PANIC0_THRES);
> +
> + /*
> + * Enable FIFO Panic, this does not generate interrupt, but
> + * boosts NoC priority based on FIFO Panic watermarks.
> + */
> + writel(INT_ENABLE_D1_PLANE_PANIC_EN,
> + lcdif->base + LCDC_V8_INT_ENABLE_D1);
Out of curiosity since we have a patch doing the exact same thing but
didn't saw any improvements. Is there a reason why you enabled it here?
We did this during lcdif_rpm_resume(). But as I said with a 1080P
display we still saw the flickering, it disappeared first after rising
the burst-size.
Regards,
Marco
> }
>
> static void lcdif_disable_controller(struct lcdif_drm_private *lcdif)
> @@ -348,6 +360,9 @@ static void lcdif_disable_controller(struct lcdif_drm_private *lcdif)
> u32 reg;
> int ret;
>
> + /* Disable FIFO Panic NoC priority booster. */
> + writel(0, lcdif->base + LCDC_V8_INT_ENABLE_D1);
> +
> reg = readl(lcdif->base + LCDC_V8_CTRLDESCL0_5);
> reg &= ~CTRLDESCL0_5_EN;
> writel(reg, lcdif->base + LCDC_V8_CTRLDESCL0_5);
> diff --git a/drivers/gpu/drm/mxsfb/lcdif_regs.h b/drivers/gpu/drm/mxsfb/lcdif_regs.h
> index fb74eb5ccbf1d..3d2f81d6f995e 100644
> --- a/drivers/gpu/drm/mxsfb/lcdif_regs.h
> +++ b/drivers/gpu/drm/mxsfb/lcdif_regs.h
> @@ -255,6 +255,7 @@
>
> #define PANIC0_THRES_LOW_MASK GENMASK(24, 16)
> #define PANIC0_THRES_HIGH_MASK GENMASK(8, 0)
> +#define PANIC0_THRES_RANGE 512
>
> #define LCDIF_MIN_XRES 120
> #define LCDIF_MIN_YRES 120
> --
> 2.35.1
>
>
