On Tue, Oct 18, 2022 at 10:57:04PM +0200, Mateusz Kwiatkowski wrote:
> Hi Maxime,
>
> W dniu 18.10.2022 o 10:31, Maxime Ripard pisze:
> > Hi,
> >
> > On Sun, Oct 16, 2022 at 09:46:49PM +0200, Mateusz Kwiatkowski wrote:
> >> @@ -308,14 +324,15 @@ static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
> >> };
> >>
> >> static inline const struct vc4_vec_tv_mode *
> >> -vc4_vec_tv_mode_lookup(unsigned int mode)
> >> +vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
> >> {
> >> unsigned int i;
> >>
> >> for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
> >> const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
> >>
> >> - if (tv_mode->mode == mode)
> >> + if (tv_mode->mode == mode &&
> >> + tv_mode->expected_htotal == htotal)
> >> return tv_mode;
> >
> > Is there any reason we're not using the refresh rate to filter this? It
> > seems more natural to me.
>
> Let me give you an example first.
>
> There are actually two ways to configure PAL-60-ish mode on VC4/VEC:
>
> a) Modeline 13.5 720 734 798 858 480 487 493 525 Interlace, standard registers
> set to VEC_CONFIG0_PAL_M_STD, custom frequency enabled and set to 0x2a098acb;
> Setting the standard registers to "PAL-M" puts the VEC in true 59.94 Hz mode,
> so the video timings are identical as for NTSC (or PAL-M), and the custom
> frequency makes the color subcarrier compatible with regular PAL receivers.
> This is the "true" PAL-60, thanks to the true System M timings.
That's the one I would expect, and I assume we could just do that by
selecting the 480i mode + PAL TV Mode property, right?
> a) Modeline 13.5 720 740 804 864 480 486 492 525 Interlace, standards registers
> set to VEC_CONFIG0_PAL with standard frequency; This is a "fake" PAL-60 mode,
> the refresh rate is actually ~59.524 Hz. Most "NTSC" sets will be able to
> sync with this mode no problem, but the VEC is actually operating in its
> 50 Hz mode - it's just the "premature" vertical sync signal causes it to
> output something that is similar to the 525-line system, however strictly
> speaking non-standard due to lower horizontal sync frequency.
But it's not really clear to me why we should support both.
> This comes down to the fact that:
>
> - When VEC's standard registers are set to VEC_CONFIG0_NTSC_STD or
> VEC_CONFIG0_PAL_M_STD, it operates in the "CCIR System M" mode, expects htotal
> to be exactly 858 pixels (and it will generate horizontal sync pulse every 858
> pixels on its own regardless of what comes out of the PV - so there will be
> garbage on screen if you set it to anything else), and vtotal to be 525 lines.
> It will not accept vtotal that's any higher (it will generate its own vertical
> sync as demanded by System M if not triggered by the PV), but it can be lower
> - resulting in modes that are non-standard, but otherwise valid.
>
> - Likewise, when the registers are set to VEC_CONFIG0_PAL_BDGHI_STD,
> VEC_CONFIG0_PAL_N_STD or VEC_CONFIG0_SECAM_STD (SECAM is a bit special, but
> that's irrelevant here), it operates in the "CCIR System B/D/G/H/I/N" mode,
> and likewise, expects htotal to be exactly 864 pixels (garbage on screen
> otherwise), vtotal limit is 625 lines, etc.
>
> Checking for the refresh rate would only work for standard-compliant modes and
> have the potential of completely breaking on any custom modes. Conversely,
> checking for htotal aligns perfectly with the limitations of the hardware, and
> allows the user to set any modeline that the hardware is able to output with
> any level of sanity.
OK
Thanks!
Maxime
Attachment:
signature.asc
Description: PGP signature
