The eDP and DP interfaces shared the bridge operations and
the eDP specific changes were implemented under is_edp check.
To add psr support for eDP, we started using a new set of eDP
bridge ops. We are moving the eDP specific code in the
dp_bridge_mode_valid function to a new eDP function,
edp_bridge_mode_valid under the eDP bridge ops.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@xxxxxxxxxxx>
Signed-off-by: Vinod Polimera <quic_vpolimer@xxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/gpu/drm/msm/dp/dp_display.c | 8 --------
drivers/gpu/drm/msm/dp/dp_drm.c | 34 +++++++++++++++++++++++++++++++++-
2 files changed, 33 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 5f2aae4..e481099 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -984,14 +984,6 @@ enum drm_mode_status dp_bridge_mode_valid(struct drm_bridge *bridge,
return -EINVAL;
}
- /*
- * The eDP controller currently does not have a reliable way of
- * enabling panel power to read sink capabilities. So, we rely
- * on the panel driver to populate only supported modes for now.
- */
- if (dp->is_edp)
- return MODE_OK;
-
if (mode->clock > DP_MAX_PIXEL_CLK_KHZ)
return MODE_CLOCK_HIGH;
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
index a3491d2..3e8912b 100644
--- a/drivers/gpu/drm/msm/dp/dp_drm.c
+++ b/drivers/gpu/drm/msm/dp/dp_drm.c
@@ -192,12 +192,44 @@ static void edp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
dp_bridge_atomic_post_disable(drm_bridge, old_bridge_state);
}
+/**
+ * edp_bridge_mode_valid - callback to determine if specified mode is valid
+ * @bridge: Pointer to drm bridge structure
+ * @info: display info
+ * @mode: Pointer to drm mode structure
+ * Returns: Validity status for specified mode
+ */
+static enum drm_mode_status edp_bridge_mode_valid(struct drm_bridge *bridge,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode)
+{
+ struct msm_dp *dp;
+ int mode_pclk_khz = mode->clock;
+
+ dp = to_dp_bridge(bridge)->dp_display;
+
+ if (!dp || !mode_pclk_khz || !dp->connector) {
+ DRM_ERROR("invalid params\n");
+ return -EINVAL;
+ }
+
+ if (mode->clock > DP_MAX_PIXEL_CLK_KHZ)
+ return MODE_CLOCK_HIGH;
+
+ /*
+ * The eDP controller currently does not have a reliable way of
+ * enabling panel power to read sink capabilities. So, we rely
+ * on the panel driver to populate only supported modes for now.
+ */
+ return MODE_OK;
+}
+
static const struct drm_bridge_funcs edp_bridge_ops = {
.atomic_enable = edp_bridge_atomic_enable,
.atomic_disable = edp_bridge_atomic_disable,
.atomic_post_disable = edp_bridge_atomic_post_disable,
.mode_set = dp_bridge_mode_set,
- .mode_valid = dp_bridge_mode_valid,
+ .mode_valid = edp_bridge_mode_valid,
.atomic_reset = drm_atomic_helper_bridge_reset,
.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
--
2.7.4
