Den 26.09.2022 kl. 12.30 skrev Michael Riesch:
Hi Sascha,
On 9/26/22 10:04, Sascha Hauer wrote:
This series adds support for 4k@30 to the rockchip HDMI controller. This
has been tested on a rk3568 rock3a board. It should be possible to add
4k@60 support the same way, but it doesn't work for me, so let's add
4k@30 as a first step.
Sascha
Changes since v1:
- Allow non standard clock rates only on Synopsys phy as suggested by
Robin Murphy
Sascha Hauer (2):
drm/rockchip: dw_hdmi: relax mode_valid hook
drm/rockchip: dw_hdmi: Add support for 4k@30 resolution
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 34 ++++++++++++++++-----
1 file changed, 27 insertions(+), 7 deletions(-)
Thanks for the v2! On a RK3568 EVB1 with a HP 27f 4k monitor
Tested-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
Sadly this still doesn't give my display out on my 2k monitor. Not even
just 1080p picture like the old current implementation does.
Best regards,
Michael
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
--
Kind regards
*Dan Johansen*
Project lead of the *Manjaro ARM* project
Manjaro-ARM <https://manjaro.org>
