Re: [PATCH v3 3/5] clk: qcom: gdsc: Add a reset op to poll gdsc collapse

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 19, 2022 at 01:48:37AM +0530, Akhil P Oommen wrote:
> Add a reset op compatible function to poll for gdsc collapse.
> 
> Signed-off-by: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
> ---
> 
> (no changes since v2)
> 
> Changes in v2:
> - Minor update to function prototype
> 
>  drivers/clk/qcom/gdsc.c | 23 +++++++++++++++++++----
>  drivers/clk/qcom/gdsc.h |  7 +++++++
>  2 files changed, 26 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
> index 44520ef..2d0f1d1 100644
> --- a/drivers/clk/qcom/gdsc.c
> +++ b/drivers/clk/qcom/gdsc.c
> @@ -17,6 +17,7 @@
>  #include <linux/reset-controller.h>
>  #include <linux/slab.h>
>  #include "gdsc.h"
> +#include "reset.h"
>  
>  #define PWR_ON_MASK		BIT(31)
>  #define EN_REST_WAIT_MASK	GENMASK_ULL(23, 20)
> @@ -116,7 +117,8 @@ static int gdsc_hwctrl(struct gdsc *sc, bool en)
>  	return regmap_update_bits(sc->regmap, sc->gdscr, HW_CONTROL_MASK, val);
>  }
>  
> -static int gdsc_poll_status(struct gdsc *sc, enum gdsc_status status)
> +static int gdsc_poll_status(struct gdsc *sc, enum gdsc_status status,
> +		s64 timeout_us, unsigned int interval_ms)
>  {
>  	ktime_t start;
>  
> @@ -124,7 +126,9 @@ static int gdsc_poll_status(struct gdsc *sc, enum gdsc_status status)
>  	do {
>  		if (gdsc_check_status(sc, status))
>  			return 0;
> -	} while (ktime_us_delta(ktime_get(), start) < TIMEOUT_US);
> +		if (interval_ms)
> +			msleep(interval_ms);

You effectively msleep(5) here, for which you shouldn't use msleep() -
or more likely, this only happens in exceptional circumstances, so a
longer interval_ms seems reasonable.

> +	} while (ktime_us_delta(ktime_get(), start) < timeout_us);
>  
>  	if (gdsc_check_status(sc, status))
>  		return 0;
> @@ -172,7 +176,7 @@ static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status)
>  		udelay(1);
>  	}
>  
> -	ret = gdsc_poll_status(sc, status);
> +	ret = gdsc_poll_status(sc, status, TIMEOUT_US, 0);
>  	WARN(ret, "%s status stuck at 'o%s'", sc->pd.name, status ? "ff" : "n");
>  
>  	if (!ret && status == GDSC_OFF && sc->rsupply) {
> @@ -343,7 +347,7 @@ static int _gdsc_disable(struct gdsc *sc)
>  		 */
>  		udelay(1);
>  
> -		ret = gdsc_poll_status(sc, GDSC_ON);
> +		ret = gdsc_poll_status(sc, GDSC_ON, TIMEOUT_US, 0);
>  		if (ret)
>  			return ret;
>  	}
> @@ -565,3 +569,14 @@ int gdsc_gx_do_nothing_enable(struct generic_pm_domain *domain)
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(gdsc_gx_do_nothing_enable);
> +
> +int gdsc_wait_for_collapse(void *priv)
> +{
> +	struct gdsc *sc = priv;
> +	int ret;
> +
> +	ret = gdsc_poll_status(sc, GDSC_OFF, 500000, 5);

So I presume the GPU driver will put() the GDSC and then issue a reset,
which will wait up to 5 seconds for the GDSC to be turned off.

So essentially, this logic is needed because we don't wait for VOTABLE
GDSCs to be turned off? And we have no way to do the put-with-wait for
this specific case.

I would like the commit message to capture this reasoning.

Thanks,
Bjorn

> +	WARN(ret, "%s status stuck at 'on'", sc->pd.name);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(gdsc_wait_for_collapse);
> diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h
> index ad313d7..d484bdb 100644
> --- a/drivers/clk/qcom/gdsc.h
> +++ b/drivers/clk/qcom/gdsc.h
> @@ -12,6 +12,7 @@
>  struct regmap;
>  struct regulator;
>  struct reset_controller_dev;
> +struct qcom_reset_map;
>  
>  /**
>   * struct gdsc - Globally Distributed Switch Controller
> @@ -79,6 +80,7 @@ int gdsc_register(struct gdsc_desc *desc, struct reset_controller_dev *,
>  		  struct regmap *);
>  void gdsc_unregister(struct gdsc_desc *desc);
>  int gdsc_gx_do_nothing_enable(struct generic_pm_domain *domain);
> +int gdsc_wait_for_collapse(void *priv);
>  #else
>  static inline int gdsc_register(struct gdsc_desc *desc,
>  				struct reset_controller_dev *rcdev,
> @@ -88,5 +90,10 @@ static inline int gdsc_register(struct gdsc_desc *desc,
>  }
>  
>  static inline void gdsc_unregister(struct gdsc_desc *desc) {};
> +
> +static int gdsc_wait_for_collapse(void *priv)
> +{
> +	return  -ENOSYS;
> +}
>  #endif /* CONFIG_QCOM_GDSC */
>  #endif /* __QCOM_GDSC_H__ */
> -- 
> 2.7.4
> 



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux