[PATCH V3 0/2] drm/panel: Add Samsung AMS495QA01 Panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Chris Morgan <macromorgan@xxxxxxxxxxx>

Add the Samsung AMS495QA01 panel as found on the Anbernic RG503. This
panel uses DSI to receive video signals, but 3-wire SPI to receive
command signals.

Changes since V2:
 - Added 50hz mode at request of userspace devs.
 - Renamed "dupa" to panel name. Good catch Maya.
 - Added Maya's Signed-off-by.
 - Removed check for max backlight, since it is already done by
   backlight_device_set_brightness.
 - Fixed minor formatting issues on devicetree binding documentation
   and added port to provided example.

Changes since V1:
 - Removed errant reference to backlight in documentation. This is an
   OLED panel.
 - Made elvss regulator optional. In my case its hard wired and not
   controllable.
 - Added "prepared" enum to track panel status to prevent unbalanced
   regulator enable/disable.

Chris Morgan (2):
  dt-bindings: display: panel: Add Samsung AMS495QA01  bindings
  drm/panel: Add Samsung AMS495QA01 MIPI-DSI LCD panel

 .../display/panel/samsung,ams495qa01.yaml     |  56 ++
 drivers/gpu/drm/panel/Kconfig                 |  10 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-samsung-ams495qa01.c  | 547 ++++++++++++++++++
 4 files changed, 614 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-samsung-ams495qa01.c

-- 
2.25.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux