On 24/09/2022 21:36, Nia Espera wrote:
> Adds a dedicated driver for the Samsung s6e3fc2x01 panel used in OnePlus
> 6T smartphones which was previously driven by the sofef00 panel driver
>
> Signed-off-by: Nia Espera <a5b6@xxxxxxxxxx>
Hi Nia,
Thanks for sending this, I'm glad to see proper support for this panel in it's
own driver rather than the somewhat hacky solution I submitted originally.
There is just one note below, but otherwise:
Reviewed-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
> ---
> MAINTAINERS | 5 +
> drivers/gpu/drm/panel/Kconfig | 11 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../gpu/drm/panel/panel-samsung-s6e3fc2x01.c | 395 ++++++++++++++++++
> 4 files changed, 412 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3fc2x01.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 936490dcc97b..7e9455ac5a13 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6630,6 +6630,11 @@ S: Maintained
> F: Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
> F: drivers/gpu/drm/panel/panel-samsung-s6d27a1.c
>
> +DRM DRIVER FOR SAMSUNG S6E3FC2X01 PANELS
> +M: Nia Espera <a5b6@xxxxxxxxxx>
> +S: Maintained
> +F: drivers/gpu/drm/panel/panel-samsung-s6e3fc2x01.c
> +
> DRM DRIVER FOR SITRONIX ST7703 PANELS
> M: Guido Günther <agx@xxxxxxxxxxx>
> R: Purism Kernel Team <kernel@xxxxxxx>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 9a281120363c..ee62d5d8828a 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -558,6 +558,17 @@ config DRM_PANEL_SAMSUNG_SOFEF00
>
> The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
>
> +config DRM_PANEL_SAMSUNG_S6E3FC2X01
> + tristate "Samsung s6e3fc2x01 OnePlus 6T DSI cmd mode panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + select VIDEOMODE_HELPERS
> + Say Y or M here if you want to enable support for the Samsung AMOLED
> + command mode panel found in the OnePlus 6T smartphone.
> +
> + The panel is 2340x1080@60Hz
> +
> config DRM_PANEL_SEIKO_43WVF1G
> tristate "Seiko 43WVF1G panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 6d493b9d64fe..b54de8812e91 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -56,6 +56,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI) += panel-samsung-s6e63m0-dsi.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01) += panel-samsung-s6e88a0-ams452ef01.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_SOFEF00) += panel-samsung-sofef00.o
> +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3FC2X01) += panel-samsung-s6e3fc2x01.o
> obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
> obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
> obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3fc2x01.c b/drivers/gpu/drm/panel/panel-samsung-s6e3fc2x01.c
> new file mode 100644
> index 000000000000..719907107bf1
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3fc2x01.c
> @@ -0,0 +1,395 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// Copyright (c) 2022 Nia Espera <a5b6@xxxxxxxxxx>
> +// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
> +// Copyright (c) 2022, The Linux Foundation. All rights reserved.
Please use C-style comments for this block (/* ... */), ignoring the SPDX identifier.
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/swab.h>
> +#include <linux/backlight.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +struct samsung_s6e3fc2x01 {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> + struct regulator *supply;
> + struct gpio_desc *reset_gpio;
> + const struct drm_display_mode *mode;
> + bool prepared;
> +};
> +
> +static inline
> +struct samsung_s6e3fc2x01 *to_samsung_s6e3fc2x01(struct drm_panel *panel)
> +{
> + return container_of(panel, struct samsung_s6e3fc2x01, panel);
> +}
> +
> +#define dsi_dcs_write_seq(dsi, seq...) do { \
> + static const u8 d[] = { seq }; \
> + int ret; \
> + ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
> + if (ret < 0) \
> + return ret; \
> + } while (0)
> +
> +static void samsung_s6e3fc2x01_reset(struct samsung_s6e3fc2x01 *ctx)
> +{
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + usleep_range(5000, 6000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + usleep_range(2000, 3000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + usleep_range(10000, 11000);
> +}
> +
> +static int samsung_s6e3fc2x01_on(struct samsung_s6e3fc2x01 *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + dsi_dcs_write_seq(dsi, 0x9f, 0xa5, 0xa5);
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> + return ret;
> + }
> + usleep_range(10000, 11000);
> +
> + dsi_dcs_write_seq(dsi, 0x9f, 0x5a, 0x5a);
> + dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> + dsi_dcs_write_seq(dsi, 0xb0, 0x01);
> + dsi_dcs_write_seq(dsi, 0xcd, 0x01);
> + dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
> + usleep_range(15000, 16000);
> + dsi_dcs_write_seq(dsi, 0x9f, 0xa5, 0xa5);
> +
> + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set tear on: %d\n", ret);
> + return ret;
> + }
> +
> + dsi_dcs_write_seq(dsi, 0x9f, 0x5a, 0x5a);
> + dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> + dsi_dcs_write_seq(dsi, 0xeb, 0x17, 0x41, 0x92, 0x0e, 0x10, 0x82, 0x5a);
> + dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
> +
> + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x0437);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set column address: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x0923);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set page address: %d\n", ret);
> + return ret;
> + }
> +
> + dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> + dsi_dcs_write_seq(dsi, 0xb0, 0x09);
> + dsi_dcs_write_seq(dsi, 0xe8, 0x10, 0x30);
> + dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
> + dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> + dsi_dcs_write_seq(dsi, 0xb0, 0x07);
> + dsi_dcs_write_seq(dsi, 0xb7, 0x01);
> + dsi_dcs_write_seq(dsi, 0xb0, 0x08);
> + dsi_dcs_write_seq(dsi, 0xb7, 0x12);
> + dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
> + dsi_dcs_write_seq(dsi, 0xfc, 0x5a, 0x5a);
> + dsi_dcs_write_seq(dsi, 0xb0, 0x01);
> + dsi_dcs_write_seq(dsi, 0xe3, 0x88);
> + dsi_dcs_write_seq(dsi, 0xb0, 0x07);
> + dsi_dcs_write_seq(dsi, 0xed, 0x67);
> + dsi_dcs_write_seq(dsi, 0xfc, 0xa5, 0xa5);
> + dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> + dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
> + dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
> + dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
> + usleep_range(1000, 2000);
> + dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> + dsi_dcs_write_seq(dsi, 0xb3, 0x00, 0xc1);
> + dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display on: %d\n", ret);
> + return ret;
> + }
> +
> + usleep_range(10000, 11000);
> + dsi_dcs_write_seq(dsi, 0x9f, 0xa5, 0xa5);
> + dsi_dcs_write_seq(dsi, 0x29);
> + dsi_dcs_write_seq(dsi, 0x9f, 0x5a, 0x5a);
> +
> + return 0;
> +}
> +
> +static int samsung_s6e3fc2x01_off(struct samsung_s6e3fc2x01 *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + dsi_dcs_write_seq(dsi, 0x9f, 0xa5, 0xa5);
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display off: %d\n", ret);
> + return ret;
> + }
> + usleep_range(10000, 11000);
> +
> + dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> + usleep_range(16000, 17000);
> + dsi_dcs_write_seq(dsi, 0xb0, 0x50);
> + dsi_dcs_write_seq(dsi, 0xb9, 0x82);
> + dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
> + usleep_range(16000, 17000);
> + msleep(40);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> + return ret;
> + }
> +
> + dsi_dcs_write_seq(dsi, 0x9f, 0x5a, 0x5a);
> + dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> + dsi_dcs_write_seq(dsi, 0xb0, 0x05);
> + dsi_dcs_write_seq(dsi, 0xf4, 0x01);
> + dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
> + msleep(160);
> +
> + return 0;
> +}
> +
> +static int samsung_s6e3fc2x01_prepare(struct drm_panel *panel)
> +{
> + struct samsung_s6e3fc2x01 *ctx = to_samsung_s6e3fc2x01(panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + if (ctx->prepared)
> + return 0;
> +
> + ret = regulator_enable(ctx->supply);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable regulator: %d\n", ret);
> + return ret;
> + }
> +
> + samsung_s6e3fc2x01_reset(ctx);
> +
> + ret = samsung_s6e3fc2x01_on(ctx);
> + if (ret < 0) {
> + dev_err(dev, "Failed to initialize panel: %d\n", ret);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + return ret;
> + }
> +
> + ctx->prepared = true;
> + return 0;
> +}
> +
> +static int samsung_s6e3fc2x01_unprepare(struct drm_panel *panel)
> +{
> + struct samsung_s6e3fc2x01 *ctx = to_samsung_s6e3fc2x01(panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + if (!ctx->prepared)
> + return 0;
> +
> + ret = samsung_s6e3fc2x01_off(ctx);
> + if (ret < 0)
> + dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
> +
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +
> + ctx->prepared = false;
> + return 0;
> +}
> +
> +static const struct drm_display_mode samsung_s6e3fc2x01_mode = {
> + .clock = (1080 + 72 + 16 + 36) * (2340 + 32 + 4 + 18) * 60 / 1000,
> + .hdisplay = 1080,
> + .hsync_start = 1080 + 72,
> + .hsync_end = 1080 + 72 + 16,
> + .htotal = 1080 + 72 + 16 + 36,
> + .vdisplay = 2340,
> + .vsync_start = 2340 + 32,
> + .vsync_end = 2340 + 32 + 4,
> + .vtotal = 2340 + 32 + 4 + 18,
> + .width_mm = 68,
> + .height_mm = 145,
> +};
> +
> +static int samsung_s6e3fc2x01_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct drm_display_mode *mode;
> + struct samsung_s6e3fc2x01 *ctx = to_samsung_s6e3fc2x01(panel);
> +
> + mode = drm_mode_duplicate(connector->dev, ctx->mode);
> + if (!mode)
> + return -ENOMEM;
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + connector->display_info.width_mm = mode->width_mm;
> + connector->display_info.height_mm = mode->height_mm;
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs samsung_s6e3fc2x01_panel_funcs = {
> + .prepare = samsung_s6e3fc2x01_prepare,
> + .unprepare = samsung_s6e3fc2x01_unprepare,
> + .get_modes = samsung_s6e3fc2x01_get_modes,
> +};
> +
> +static int s6e3fc2x01_panel_bl_update_status(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + int err;
> + u16 brightness;
> +
> + brightness = (u16)backlight_get_brightness(bl);
> + // This panel needs the high and low bytes swapped for the brightness value
> + brightness = __swab16(brightness);
> +
> + err = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
> + if (err < 0)
> + return err;
> +
> + return 0;
> +}
> +
> +static const struct backlight_ops s6e3fc2x01_panel_bl_ops = {
> + .update_status = s6e3fc2x01_panel_bl_update_status,
> +};
> +
> +static struct backlight_device *
> +s6e3fc2x01_create_backlight(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + const struct backlight_properties props = {
> + .type = BACKLIGHT_PLATFORM,
> + .brightness = 1023,
> + .max_brightness = 1023,
> + };
> +
> + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> + &s6e3fc2x01_panel_bl_ops, &props);
> +}
> +
> +static int samsung_s6e3fc2x01_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct samsung_s6e3fc2x01 *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->mode = of_device_get_match_data(dev);
> +
> + if (!ctx->mode) {
> + dev_err(dev, "Missing device mode\n");
> + return -ENODEV;
> + }
> +
> + ctx->supply = devm_regulator_get(dev, "vddio");
> + if (IS_ERR(ctx->supply))
> + return dev_err_probe(dev, PTR_ERR(ctx->supply),
> + "Failed to get vddio regulator\n");
> +
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(ctx->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
> + "Failed to get reset-gpios\n");
> +
> + ctx->dsi = dsi;
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_NO_EOT_PACKET |
> + MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +
> + drm_panel_init(&ctx->panel, dev, &samsung_s6e3fc2x01_panel_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + ctx->panel.backlight = s6e3fc2x01_create_backlight(dsi);
> + if (IS_ERR(ctx->panel.backlight))
> + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
> + "Failed to create backlight\n");
> +
> + drm_panel_add(&ctx->panel);
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> + drm_panel_remove(&ctx->panel);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int samsung_s6e3fc2x01_remove(struct mipi_dsi_device *dsi)
> +{
> + struct samsung_s6e3fc2x01 *ctx = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> +
> + drm_panel_remove(&ctx->panel);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id samsung_s6e3fc2x01_of_match[] = {
> + {
> + .compatible = "samsung,s6e3fc2x01",
> + .data = &samsung_s6e3fc2x01_mode,
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, samsung_s6e3fc2x01_of_match);
> +
> +static struct mipi_dsi_driver samsung_s6e3fc2x01_driver = {
> + .probe = samsung_s6e3fc2x01_probe,
> + .remove = samsung_s6e3fc2x01_remove,
> + .driver = {
> + .name = "panel-samsung-s6e3fc2x01",
> + .of_match_table = samsung_s6e3fc2x01_of_match,
> + },
> +};
> +module_mipi_dsi_driver(samsung_s6e3fc2x01_driver);
> +
> +MODULE_AUTHOR("Nia Espera <a5b6@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("DRM driver for OnePlus 6T Panel");
> +MODULE_LICENSE("GPL v2");
> --
> 2.37.3
>
--
Kind Regards,
Caleb
