Re: [PATCH v6 04/12] dt-bindings: display/msm: move common DPU properties to dpu-common.yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/09/2022 00:13, Dmitry Baryshkov wrote:
On Wed, 7 Sept 2022 at 22:59, Rob Herring <robh@xxxxxxxxxx> wrote:

On Thu, Sep 01, 2022 at 01:23:04PM +0300, Dmitry Baryshkov wrote:
Move properties common to all DPU DT nodes to the dpu-common.yaml.

Note, this removes description of individual DPU port@ nodes. However
such definitions add no additional value. The reg values do not
correspond to hardware INTF indices. The driver discovers and binds
these ports not paying any care for the order of these items. Thus just
leave the reference to graph.yaml#/properties/ports and the description.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
  .../bindings/display/msm/dpu-common.yaml      | 44 ++++++++++++++++++
  .../bindings/display/msm/dpu-msm8998.yaml     | 46 ++-----------------
  .../bindings/display/msm/dpu-qcm2290.yaml     | 41 ++---------------
  .../bindings/display/msm/dpu-sc7180.yaml      | 45 ++----------------
  .../bindings/display/msm/dpu-sc7280.yaml      | 45 ++----------------
  .../bindings/display/msm/dpu-sdm845.yaml      | 46 ++-----------------
  6 files changed, 64 insertions(+), 203 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-common.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
new file mode 100644
index 000000000000..bf5764e9932b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
@@ -0,0 +1,44 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties (common properties)
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@xxxxxxxxxxx>
+  - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
+  - Rob Clark <robdclark@xxxxxxxxx>
+
+description: |
+  Common properties for QCom DPU display controller.
+
+properties:
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains the list of output ports from DPU device. These ports
+      connect to interfaces that are external to the DPU hardware,
+      such as DSI, DP etc.

Haven't we been over this already?

You have to define 'port' nodes or else anything is allowed in them
(and endpoint nodes). If you want to define them as pattern, then fine.
But you must have a ref to graph.yaml#/properties/port.

Last time you asked to do this, I did a check. Adding any additional
property results in a schema error. And this is logical.
graph.yaml#/properties/ports already limits the node properties. I
thus do not see a need to define port@[0-9a-f]+$. Did I miss anything?

I see, what I did miss now. I missed adding properties to individual /port nodes. Please excuse me. BTW: is there any reason for not enforcing this in the graph.yaml?

--
With best wishes
Dmitry




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux