On Tue, Sep 13, 2022 at 11:33:39AM -0700, Radhakrishna Sripada wrote:
> From: Matt Roper <matthew.d.roper@xxxxxxxxx>
>
> The part of the media and blitter engine contexts that we care about for
> setting up an initial state are the same on MTL as they were on DG2
> (and PVC), so we need to update the driver conditions to re-use the DG2
> context table.
>
> For render/compute engines, the part of the context images are nearly
> the same, although the layout had a very slight change --- one POSH
> register was removed and the placement of some LRI/noops adjusted
> slightly to compensate.
>
> v2:
> - Dg2, mtl xcs offsets slightly vary. Use a separate offsets array(Bala)
> - Drop unused registers in mtl rcs offsets.(Bala)
> - Add missing nop in xcs offsets(Bala)
> v3:
> - Fix the spacing for nop in xcs offset(MattR)
>
> Bspec: 46261, 46260, 45585
> Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@xxxxxxxxx>
> Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/gt/intel_lrc.c | 82 ++++++++++++++++++++++++++++-
> 1 file changed, 80 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.c b/drivers/gpu/drm/i915/gt/intel_lrc.c
> index 08214683e130..8fe6aa01c7bd 100644
> --- a/drivers/gpu/drm/i915/gt/intel_lrc.c
> +++ b/drivers/gpu/drm/i915/gt/intel_lrc.c
> @@ -264,6 +264,39 @@ static const u8 dg2_xcs_offsets[] = {
> END
> };
>
> +static const u8 mtl_xcs_offsets[] = {
> + NOP(1),
> + LRI(13, POSTED),
> + REG16(0x244),
> + REG(0x034),
> + REG(0x030),
> + REG(0x038),
> + REG(0x03c),
> + REG(0x168),
> + REG(0x140),
> + REG(0x110),
> + REG(0x1c0),
> + REG(0x1c4),
> + REG(0x1c8),
> + REG(0x180),
> + REG16(0x2b4),
> + NOP(4),
> +
> + NOP(1),
> + LRI(9, POSTED),
> + REG16(0x3a8),
> + REG16(0x28c),
> + REG16(0x288),
> + REG16(0x284),
> + REG16(0x280),
> + REG16(0x27c),
> + REG16(0x278),
> + REG16(0x274),
> + REG16(0x270),
> +
> + END
> +};
> +
> static const u8 gen8_rcs_offsets[] = {
> NOP(1),
> LRI(14, POSTED),
> @@ -606,6 +639,47 @@ static const u8 dg2_rcs_offsets[] = {
> END
> };
>
> +static const u8 mtl_rcs_offsets[] = {
> + NOP(1),
> + LRI(13, POSTED),
> + REG16(0x244),
> + REG(0x034),
> + REG(0x030),
> + REG(0x038),
> + REG(0x03c),
> + REG(0x168),
> + REG(0x140),
> + REG(0x110),
> + REG(0x1c0),
> + REG(0x1c4),
> + REG(0x1c8),
> + REG(0x180),
> + REG16(0x2b4),
The xcs looks correct now, but it looks like rcs still has a mistake
here. We should have 0x120 and 0x124 listed here too.
Matt
> +
> + NOP(1),
> + LRI(9, POSTED),
> + REG16(0x3a8),
> + REG16(0x28c),
> + REG16(0x288),
> + REG16(0x284),
> + REG16(0x280),
> + REG16(0x27c),
> + REG16(0x278),
> + REG16(0x274),
> + REG16(0x270),
> +
> + NOP(2),
> + LRI(2, POSTED),
> + REG16(0x5a8),
> + REG16(0x5ac),
> +
> + NOP(6),
> + LRI(1, 0),
> + REG(0x0c8),
> +
> + END
> +};
> +
> #undef END
> #undef REG16
> #undef REG
> @@ -624,7 +698,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)
> !intel_engine_has_relative_mmio(engine));
>
> if (engine->flags & I915_ENGINE_HAS_RCS_REG_STATE) {
> - if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
> + if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 70))
> + return mtl_rcs_offsets;
> + else if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
> return dg2_rcs_offsets;
> else if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
> return xehp_rcs_offsets;
> @@ -637,7 +713,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)
> else
> return gen8_rcs_offsets;
> } else {
> - if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
> + if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 70))
> + return mtl_xcs_offsets;
> + else if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
> return dg2_xcs_offsets;
> else if (GRAPHICS_VER(engine->i915) >= 12)
> return gen12_xcs_offsets;
> --
> 2.34.1
>
--
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
