Hi, please find some review comments inline.
BR,
Jani.
On Sat, 23 Mar 2013, Dylan Semler <dylan.semler@xxxxxxxxx> wrote:
> There is at least one monitor that doesn't report its native resolution
> in its EDID block. This enhancement extends the EDID quirk logic to
> make monitors like this "just work".
>
> This patch sets up a new quirk list where monitors' correct width,
> height, refresh rate, and reduced blanking parameters are specified.
> When a matching monitor is attached the full mode is calculated with
> drm_cvt_mode() and added to the connector. The DRM_MODE_TYPE_PREFERRED
> bit is set on the new mode and unset from all other modes.
>
> The patch also defines a new quirk bit: EDID_QUIRK_FORCE_MODE. This
> bit needs to be set for the new quirk list discribed above to be
> checked.
>
> Signed-off-by: Dylan Semler <dylan.semler@xxxxxxxxx>
> ---
> drivers/gpu/drm/drm_edid.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 78 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index c194f4e..38b8641 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -68,6 +68,8 @@
> #define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6)
> /* Force reduced-blanking timings for detailed modes */
> #define EDID_QUIRK_FORCE_REDUCED_BLANKING (1 << 7)
> +/* Force specific mode for monitors that don't report correct EDIDs */
> +#define EDID_QUIRK_FORCE_MODE (1 << 8)
>
> struct detailed_mode_closure {
> struct drm_connector *connector;
> @@ -127,6 +129,16 @@ static struct edid_quirk {
> { "VSC", 5020, EDID_QUIRK_FORCE_REDUCED_BLANKING },
> };
>
> +static struct edid_quirk_force_mode {
> + char vendor[4];
> + int product_id;
> + int hdisplay;
> + int vdisplay;
> + int vrefresh;
> + bool reduced;
> +} edid_quirk_force_mode_list[] = {
> +};
> +
> /*
> * Autogenerated from the DMT spec.
> * This table is copied from xfree86/modes/xf86EdidModes.c.
> @@ -2219,6 +2231,70 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid,
> return closure.modes;
> }
>
> +/* Add an explicit mode based on a quirk
> + */
> +static int
> +do_force_quirk_modes(struct drm_connector *connector, int hdisplay,
> + int vdisplay, int vrefresh, bool reduced)
Nitpick: This adds one mode, not many _modes_.
> +{
> + struct drm_display_mode *mode, *t, *cur_mode;
> + struct drm_device *dev = connector->dev;
> + int num_modes = 0;
> +
> + /* sanity check display parameters */
> + if (hdisplay < 0)
> + return 0;
> + if (vdisplay < 0)
> + return 0;
> + if (vrefresh < 0)
> + return 0;
> +
> + /* loop through the probed modes and clear the preferred bit */
> + list_for_each_entry_safe(cur_mode, t, &connector->probed_modes, head)
> + cur_mode->type &= ~DRM_MODE_TYPE_PREFERRED;
You're not deleting entries, so list_for_each_entry() would suffice,
getting rid of the temp variable.
> +
> + mode = drm_cvt_mode(dev, hdisplay, vdisplay, vrefresh, reduced, 0, 0);
You could
if (!mode)
return 0;
here and get rid of the num_modes variable.
> +
> + if (mode) {
> + mode->type |= DRM_MODE_TYPE_PREFERRED;
> + drm_mode_probed_add(connector, mode);
> + num_modes++;
> + }
> + return num_modes;
> +}
> +
> +/*
> + * add_force_quirk_modes - Add modes based on monitor's EDID quirks
> + * @connector: attached connector
> + * @edid: EDID block to scan
> + * @quirks: quirks to apply
> + *
> + * At least one monitor doesn't report its native resolution in its EDID block.
> + * Here we add the native mode according to this quirk
> + */
> +static int
> +add_force_quirk_modes(struct drm_connector *connector, struct edid *edid,
> + u32 quirks)
> +{
> + struct edid_quirk_force_mode *quirk_mode;
> + int i, num_modes = 0;
> +
> + for (i = 0; i < ARRAY_SIZE(edid_quirk_force_mode_list); i++) {
> + quirk_mode = &edid_quirk_force_mode_list[i];
> +
> + if (edid_vendor(edid, quirk_mode->vendor) &&
> + (EDID_PRODUCT_ID(edid) == quirk_mode->product_id)) {
> + num_modes = do_force_quirk_modes(connector,
> + quirk_mode->hdisplay,
> + quirk_mode->vdisplay,
> + quirk_mode->vrefresh,
> + quirk_mode->reduced);
I was wondering why you don't bail out here. Maybe you want to be able
to add more than one quirk mode? In that case you should +=, not = the
num_modes.
(Note that then do_force_quirk_modes makes the last one in the array the
preferred mode, clearing the DRM_MODE_TYPE_PREFERRED from the previously
added quirk modes.)
> + }
> + }
> + return num_modes;
> +
> +}
> +
> #define HDMI_IDENTIFIER 0x000C03
> #define AUDIO_BLOCK 0x01
> #define VIDEO_BLOCK 0x02
> @@ -2803,6 +2879,8 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
>
> if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
> edid_fixup_preferred(connector, quirks);
> + if (quirks & EDID_QUIRK_FORCE_MODE)
> + num_modes += add_force_quirk_modes(connector, edid, quirks);
You don't use quirks within add_force_quirk_modes() for anything.
>
> drm_add_display_info(edid, &connector->display_info);
>
> --
> 1.7.11.7
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
