[PATCH v3 1/2] drm: Enhance EDID quirks to explicitly set a mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is at least one monitor that doesn't report its native resolution
in its EDID block.  This enhancement extends the EDID quirk logic to
make monitors like this "just work".

This patch sets up a new quirk list where monitors' correct width,
height, refresh rate, and reduced blanking parameters are specified.
When a matching monitor is attached the full mode is calculated with
drm_cvt_mode() and added to the connector.  The DRM_MODE_TYPE_PREFERRED
bit is set on the new mode and unset from all other modes.

The patch also defines a new quirk bit: EDID_QUIRK_FORCE_MODE.  This
bit needs to be set for the new quirk list discribed above to be
checked.

Signed-off-by: Dylan Semler <dylan.semler@xxxxxxxxx>
---
 drivers/gpu/drm/drm_edid.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index c194f4e..38b8641 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -68,6 +68,8 @@
 #define EDID_QUIRK_DETAILED_SYNC_PP		(1 << 6)
 /* Force reduced-blanking timings for detailed modes */
 #define EDID_QUIRK_FORCE_REDUCED_BLANKING	(1 << 7)
+/* Force specific mode for monitors that don't report correct EDIDs */
+#define EDID_QUIRK_FORCE_MODE			(1 << 8)
 
 struct detailed_mode_closure {
 	struct drm_connector *connector;
@@ -127,6 +129,16 @@ static struct edid_quirk {
 	{ "VSC", 5020, EDID_QUIRK_FORCE_REDUCED_BLANKING },
 };
 
+static struct edid_quirk_force_mode {
+	char vendor[4];
+	int product_id;
+	int hdisplay;
+	int vdisplay;
+	int vrefresh;
+	bool reduced;
+} edid_quirk_force_mode_list[] = {
+};
+
 /*
  * Autogenerated from the DMT spec.
  * This table is copied from xfree86/modes/xf86EdidModes.c.
@@ -2219,6 +2231,70 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid,
 	return closure.modes;
 }
 
+/* Add an explicit mode based on a quirk
+ */
+static int
+do_force_quirk_modes(struct drm_connector *connector, int hdisplay,
+		     int vdisplay, int vrefresh, bool reduced)
+{
+	struct drm_display_mode *mode, *t, *cur_mode;
+	struct drm_device *dev = connector->dev;
+	int num_modes = 0;
+
+	/* sanity check display parameters */
+	if (hdisplay < 0)
+		return 0;
+	if (vdisplay < 0)
+		return 0;
+	if (vrefresh < 0)
+		return 0;
+
+	/* loop through the probed modes and clear the preferred bit */
+	list_for_each_entry_safe(cur_mode, t, &connector->probed_modes, head)
+		cur_mode->type &= ~DRM_MODE_TYPE_PREFERRED;
+
+	mode = drm_cvt_mode(dev, hdisplay, vdisplay, vrefresh, reduced, 0, 0);
+
+	if (mode) {
+		mode->type |= DRM_MODE_TYPE_PREFERRED;
+		drm_mode_probed_add(connector, mode);
+		num_modes++;
+	}
+	return num_modes;
+}
+
+/*
+ * add_force_quirk_modes - Add modes based on monitor's EDID quirks
+ * @connector: attached connector
+ * @edid: EDID block to scan
+ * @quirks: quirks to apply
+ *
+ * At least one monitor doesn't report its native resolution in its EDID block.
+ * Here we add the native mode according to this quirk
+ */
+static int
+add_force_quirk_modes(struct drm_connector *connector, struct edid *edid,
+		      u32 quirks)
+{
+	struct edid_quirk_force_mode *quirk_mode;
+	int i, num_modes = 0;
+
+	for (i = 0; i < ARRAY_SIZE(edid_quirk_force_mode_list); i++) {
+		quirk_mode = &edid_quirk_force_mode_list[i];
+
+		if (edid_vendor(edid, quirk_mode->vendor) &&
+		    (EDID_PRODUCT_ID(edid) == quirk_mode->product_id)) {
+			num_modes = do_force_quirk_modes(connector,
+					quirk_mode->hdisplay,
+					quirk_mode->vdisplay,
+					quirk_mode->vrefresh,
+					quirk_mode->reduced);
+		}
+	}
+	return num_modes;
+
+}
+
 #define HDMI_IDENTIFIER 0x000C03
 #define AUDIO_BLOCK	0x01
 #define VIDEO_BLOCK     0x02
@@ -2803,6 +2879,8 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
 
 	if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
 		edid_fixup_preferred(connector, quirks);
+	if (quirks & EDID_QUIRK_FORCE_MODE)
+		num_modes += add_force_quirk_modes(connector, edid, quirks);
 
 	drm_add_display_info(edid, &connector->display_info);
 
-- 
1.7.11.7

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux