On Thu, Sep 08, 2022 at 02:08:55PM +0300, Ville Syrjälä wrote:
On Wed, Sep 07, 2022 at 01:30:41PM -0700, Lucas De Marchi wrote:
Continue converting the driver to the convention of last version first,
extending it to the future platforms. Now, any GRAPHICS_VER >= 11 will
be handled by the first branch.
With the new ranges it's easier to see what platform a branch started to
be taken. Besides the >= 11 change, the branch taken for GRAPHICS_VER == 10
is also different, but currently there is no such platform in i915.
Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
---
.../gpu/drm/i915/gt/intel_gt_clock_utils.c | 77 +++++++++----------
1 file changed, 37 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c b/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c
index d5d1b04dbcad..93608c9349fd 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c
+++ b/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c
@@ -78,77 +78,74 @@ static u32 read_clock_frequency(struct intel_uncore *uncore)
u32 f19_2_mhz = 19200000;
u32 f24_mhz = 24000000;
- if (GRAPHICS_VER(uncore->i915) <= 4) {
- /*
- * PRMs say:
- *
- * "The value in this register increments once every 16
- * hclks." (through the “Clocking Configuration”
- * (“CLKCFG”) MCHBAR register)
- */
- return RUNTIME_INFO(uncore->i915)->rawclk_freq * 1000 / 16;
- } else if (GRAPHICS_VER(uncore->i915) <= 8) {
- /*
- * PRMs say:
- *
- * "The PCU TSC counts 10ns increments; this timestamp
- * reflects bits 38:3 of the TSC (i.e. 80ns granularity,
- * rolling over every 1.5 hours).
- */
- return f12_5_mhz;
- } else if (GRAPHICS_VER(uncore->i915) <= 9) {
Is there a good reason each of these branches isn't just its own function?
Because they are a single line, hard to justify a separate function, but
yes, we could move each of those to a separate one since the others
start to span a little more.
Lucas De Marchi
+ if (GRAPHICS_VER(uncore->i915) >= 11) {
u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
u32 freq = 0;
+ /*
+ * First figure out the reference frequency. There are 2 ways
+ * we can compute the frequency, either through the
+ * TIMESTAMP_OVERRIDE register or through RPM_CONFIG. CTC_MODE
+ * tells us which one we should use.
+ */
if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
freq = read_reference_ts_freq(uncore);
} else {
- freq = IS_GEN9_LP(uncore->i915) ? f19_2_mhz : f24_mhz;
+ u32 c0 = intel_uncore_read(uncore, RPM_CONFIG0);
+
+ if (GRAPHICS_VER(uncore->i915) >= 11)
+ freq = gen11_get_crystal_clock_freq(uncore, c0);
+ else
+ freq = gen9_get_crystal_clock_freq(uncore, c0);
/*
* Now figure out how the command stream's timestamp
* register increments from this frequency (it might
* increment only every few clock cycle).
*/
- freq >>= 3 - ((ctc_reg & CTC_SHIFT_PARAMETER_MASK) >>
- CTC_SHIFT_PARAMETER_SHIFT);
+ freq >>= 3 - ((c0 & GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_MASK) >>
+ GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_SHIFT);
}
return freq;
- } else if (GRAPHICS_VER(uncore->i915) <= 12) {
+ } else if (GRAPHICS_VER(uncore->i915) >= 9) {
u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
u32 freq = 0;
- /*
- * First figure out the reference frequency. There are 2 ways
- * we can compute the frequency, either through the
- * TIMESTAMP_OVERRIDE register or through RPM_CONFIG. CTC_MODE
- * tells us which one we should use.
- */
if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
freq = read_reference_ts_freq(uncore);
} else {
- u32 c0 = intel_uncore_read(uncore, RPM_CONFIG0);
-
- if (GRAPHICS_VER(uncore->i915) >= 11)
- freq = gen11_get_crystal_clock_freq(uncore, c0);
- else
- freq = gen9_get_crystal_clock_freq(uncore, c0);
+ freq = IS_GEN9_LP(uncore->i915) ? f19_2_mhz : f24_mhz;
/*
* Now figure out how the command stream's timestamp
* register increments from this frequency (it might
* increment only every few clock cycle).
*/
- freq >>= 3 - ((c0 & GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_MASK) >>
- GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_SHIFT);
+ freq >>= 3 - ((ctc_reg & CTC_SHIFT_PARAMETER_MASK) >>
+ CTC_SHIFT_PARAMETER_SHIFT);
}
return freq;
+ } else if (GRAPHICS_VER(uncore->i915) >= 5) {
+ /*
+ * PRMs say:
+ *
+ * "The PCU TSC counts 10ns increments; this timestamp
+ * reflects bits 38:3 of the TSC (i.e. 80ns granularity,
+ * rolling over every 1.5 hours).
+ */
+ return f12_5_mhz;
+ } else {
+ /*
+ * PRMs say:
+ *
+ * "The value in this register increments once every 16
+ * hclks." (through the “Clocking Configuration”
+ * (“CLKCFG”) MCHBAR register)
+ */
+ return RUNTIME_INFO(uncore->i915)->rawclk_freq * 1000 / 16;
}
-
- MISSING_CASE("Unknown gen, unable to read command streamer timestamp frequency\n");
- return 0;
}
void intel_gt_init_clock_frequency(struct intel_gt *gt)
--
2.37.2
--
Ville Syrjälä
Intel