Re: [PATCH v2 32/41] drm/vc4: vec: Convert to the new TV mode property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 31, 2022 at 04:23:21AM +0200, Mateusz Kwiatkowski wrote:
> I tested your patchset on my Pi and it mostly works. Good work! However,
> I noticed a couple of issues.
> 
> > -static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
> > -                    struct drm_crtc_state *crtc_state,
> > -                    struct drm_connector_state *conn_state)
> > -{
> > -    const struct vc4_vec_tv_mode *vec_mode;
> > -
> > -    vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode];
> > -
> > -    if (conn_state->crtc &&
> > -        !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
> > -        return -EINVAL;
> > -
> > -    return 0;
> > -}
> 
> I may have said it myself that we should allow custom modelines without too
> much validation. The VC4 and VEC, however, have some considerable limitations
> when it comes to the modelines that they can reliably output.
> 
> In particular, attempting to use "50 Hz" timings in NTSC/PAL-M modes (or
> "60 Hz" in PAL/SECAM modes) results in a weirdly skewed image. Here's how it
> may look like:
> https://user-images.githubusercontent.com/4499762/187575940-736e7262-c82d-42f3-a2d8-f309cbd51139.png
> 
> This is because if the CRTC does not trigger the sync pulses within an
> acceptable time window, the VEC apparently generates them itself. This causes
> the VEC sync pulses (which go onto the wire) not quite line up with the ones
> from the modeline, which results in what you see on the screenshot.
> 
> I once wrote a validation function based on extensive testing of what
> produces a sensible output and what doesn't. You can find it here:
> https://github.com/raspberrypi/linux/pull/4406/commits/15c0c51. I think it
> might be a good idea to include something like that - even though I know it's
> somewhat ugly.

I've reworked that code a bit, and it will be part of my next version.

> (BTW, those %2 checks on vertical timings in that linked commit can be ignored;
> those values are divided by 2 for interlaced modes anyway. Those checks were
> intended to ensure proper odd-first or even-first timings; I'm not sure if your
> code calculates those in the same way)

Ack, I've removed them.

> >  static int vc4_vec_connector_get_modes(struct drm_connector *connector)
> >  {
> > -    struct drm_connector_state *state = connector->state;
> >      struct drm_display_mode *mode;
> > +    int count = 0;
> >  
> > -    mode = drm_mode_duplicate(connector->dev,
> > -                  vc4_vec_tv_modes[state->tv.mode].mode);
> > +    mode = drm_mode_analog_ntsc_480i(connector->dev);
> >      if (!mode) {
> >          DRM_ERROR("Failed to create a new display mode\n");
> >          return -ENOMEM;
> >      }
> >  
> >      drm_mode_probed_add(connector, mode);
> > +    count += 1;
> >  
> > -    return 1;
> > +    mode = drm_mode_analog_pal_576i(connector->dev);
> > +    if (!mode) {
> > +        DRM_ERROR("Failed to create a new display mode\n");
> > +        return -ENOMEM;
> > +    }
> > +
> > +    drm_mode_probed_add(connector, mode);
> > +    count += 1;
> > +
> > +    return count;
> > +}
> 
> Xorg is pretty confused by these modes being reported like that. The 576i mode
> is *always* preferred, presumably because of the higher resolution. If the NTSC
> mode is set (via the kernel cmdline or just due to it being the default), this
> results in a mess on the screen - exactly the same thing as on the screenshot
> linked above.
> 
> Note that drm_helper_probe_add_cmdline_mode() *does* add the
> DRM_MODE_TYPE_USERDEF flag to the 480i mode, having detected it as preferred
> on the command line - but Xorg does not seem to care about that.

I'm not quite sure why that would be the case. The usual logic to pick
the preferred mode is to use either the mode with the flag or the first
one.

> I remember Noralf suggesting setting DRM_MODE_TYPE_PREFERRED for the mode that
> corresponds to the currently chosen tv_mode - that would fix the problem.
> An alternative would be to _not_ add the "opposite" mode at all, like the
> current default Raspberry Pi OS kernel behaves.

I'll add it the PREFERRED flag then, switching the modes have other
challenges.

Maxime

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux