On Tuesday, March 19, 2013 04:12:18 PM Daniel Vetter wrote:
> On Tue, Mar 19, 2013 at 10:03 AM, Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
wrote:
> >> > How about just using:
> >> > if (!HAS_GMBUS_IRQ(dev_priv->dev)) gmbus4_irq_en = 0;
> >> >
> >> > and the existing wait loop?
> >>
> >> I explicitly wanted to avoid touching GMBUS4 register, as the real cause
> >> of the failure is not clear.
> >>
> >> But, as Yinghai Lu points out, the problem is most likely caused by
> >> interrupt disabling not working properly (see his very good point
> >> regarding DisINTx+ and INTx+ discrepancy), so zeroing the register out
> >> should work .... and it indeed does in my case, hence the (tested) patch
> >> below.
> >>
> >> I think it's a 3.9-rc material, and I am all open to debug this further
> >> for 3.10 so that the race is closed and gmbus irqs can be used on Gen4
> >> platform properly.
> >
> > Agreed. Using the IRQ for GMBUS is just a performance feature that can
> > be deferred until after we determine the root cause - and hope that the
> > failure is somehow peculiar to GMBUS.
>
> Ok, I've merged this patch. But some further investigation points at a
> much more severe dragon hiding here: The MSI interrupt for the intel
> gfx is commonly in the 40+ range, but the interrupt vector with the
> spurious interrupts is 16. Which is the irq of the intel gfx when MSI
> is disabled!
>
> So it looks like gmbus on the intel gfx is capable of generating
> non-MSI interrupts in parallel to the MSI interrupts (since apparently
> gmbus still works, so we get the interrupts we expect). I have no idea
> how that could happen. Hence adding a bunch of people with more clue
> than me.
>
Hello folks,
I am using Linus git master and built an rpm for 3.9.0-rc4 which has Jiri's
patch. I confirm this patch returns the GMA 4500 to working behavior as in
3.8.
Thanks everyone.
Shawn
> For reference below the updated commit message.
>
> Cheers, Daniel
>
> Author: Jiri Kosina <jkosina@xxxxxxx>
> Date: Tue Mar 19 09:56:57 2013 +0100
>
> drm/i915: stop using GMBUS IRQs on Gen4 chips
>
> Commit 28c70f162 ("drm/i915: use the gmbus irq for waits") switched to
> using GMBUS irqs instead of GPIO bit-banging for chipset generations 4
> and above.
>
> It turns out though that on many systems this leads to spurious
> interrupts being generated, long after the register write to disable the
> IRQs has been issued.
>
> Typically this results in the spurious interrupt source getting
> disabled:
>
> [ 9.636345] irq 16: nobody cared (try booting with the "irqpoll"
> option) [ 9.637915] Pid: 4157, comm: ifup Tainted: GF
> 3.9.0-rc2-00341-g0863702 #422
> [ 9.639484] Call Trace:
> [ 9.640731] <IRQ> [<ffffffff8109b40d>] __report_bad_irq+0x1d/0xc7
> [ 9.640731] [<ffffffff8109b7db>] note_interrupt+0x15b/0x1e8
> [ 9.640731] [<ffffffff810999f7>] handle_irq_event_percpu+0x1bf/0x214
> [ 9.640731] [<ffffffff81099a88>] handle_irq_event+0x3c/0x5c [
> 9.640731] [<ffffffff8109c139>] handle_fasteoi_irq+0x7a/0xb0 [ 9.640731]
> [<ffffffff8100400e>] handle_irq+0x1a/0x24
> [ 9.640731] [<ffffffff81003d17>] do_IRQ+0x48/0xaf
> [ 9.640731] [<ffffffff8142f1ea>] common_interrupt+0x6a/0x6a
> [ 9.640731] <EOI> [<ffffffff8142f952>] ?
> system_call_fastpath+0x16/0x1b [ 9.640731] handlers:
> [ 9.640731] [<ffffffffa000d771>] usb_hcd_irq [usbcore]
> [ 9.640731] [<ffffffffa0306189>] yenta_interrupt [yenta_socket]
> [ 9.640731] Disabling IRQ #16
>
> The really curious thing is now that irq 16 is _not_ the interrupt for
> the i915 driver when using MSI, but it _is_ the interrupt when not
> using MSI. So by all indications it seems like gmbus is able to
> generate a legacy (shared) interrupt in MSI mode on some
> configurations. I've tried to reproduce this and the differentiating
> thing seems to be that on unaffected systems no other device uses irq
> 16 (which seems to be the non-MSI intel gfx interrupt on all gm45).
>
> I have no idea how that even can happen.
>
> To avoid tempting this elephant into a rage, just disable gmbus
> interrupt support on gen 4.
>
> v2: Improve the commit message with exact details of what's going on.
> Also add a comment in the code to warn against this particular
> elephant in the room.
>
> Signed-off-by: Jiri Kosina <jkosina@xxxxxxx> (v1)
> Acked-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx> (v1)
> References: https://lkml.org/lkml/2013/3/8/325
> Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
