On Tue, 19 Mar 2013, Yinghai Lu wrote: > > I guess I should have phrased it more precisely, but that's exactly > > what I expect is happening on my machine: I don't have anything on > > irq16 (i.e. in non-msi mode the gfx interrupt isn't shared) and hence > > the irq is completely disabled. Which obviously makes it impossible > > for me to reproduce the issue. To test that theory, is there a quick > > way to force-enable a given interrupt, short of just hacking up a 2nd > > dummy irq handler in my driver? > > You may try to add another request_irq() > after i915_load_modeset_init==>drm_irq_install. > That could install one dummy action for ioapic irq for i915. > > Also you may need to add one quirk that does not disable intx during > msi enabling like: > DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, > 0x2e22, > quirk_msi_intx_disable_bug); > This seemed to be really promising idea to me, as the DisINTx+ vs INTx+ discrepancy is very good hint, but unfortunately, after applying this: --- drivers/pci/quirks.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 0369fb6..8508e24 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2643,6 +2643,9 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073, quirk_msi_intx_disable_bug); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083, quirk_msi_intx_disable_bug); + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2a42, + quirk_msi_intx_disable_bug); #endif /* CONFIG_PCI_MSI */ /* Allow manual resource allocation for PCI hotplug bridges The problem is still there ... so the inconsistency between DisINTx+ and INTx+ is unfortunately not the whole story. -- Jiri Kosina SUSE Labs _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
