Hi,
Thanks for the patch.
> Subject: [PATCH v3 4/5] drm/panfrost: devfreq: set opp to the recommended
> one to configure and enable regulator
>
> devm_pm_opp_set_regulators() doesn't enable regulator, which make
> regulator framework switching it off during regulator_late_cleanup().
In that case, why not regulator_get()for
Dynamic regulator(non fixed regulator)??
>
> Call dev_pm_opp_set_opp() with the recommend OPP in
> panfrost_devfreq_init() to enable the regulator and avoid any switch off
> by regulator_late_cleanup().
>
> Suggested-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
> Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
> ---
> drivers/gpu/drm/panfrost/panfrost_devfreq.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index 5110cd9b2425..67b242407156 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -131,6 +131,14 @@ int panfrost_devfreq_init(struct panfrost_device
> *pfdev)
> return PTR_ERR(opp);
>
> panfrost_devfreq_profile.initial_freq = cur_freq;
> +
> + /* Setup and enable regulator */
> + ret = dev_pm_opp_set_opp(dev, opp);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "Couldn't set recommended OPP\n");
> + return ret;
> + }
FYI,
On RZ/G2L mali gpu, we have fixed regulator and
I was able to do GPU OPP transition without any issues previously.
root@smarc-rzg2l:~# cat /sys/class/devfreq/11840000.gpu/trans_stat
From : To
: 50000000 62500000 100000000 125000000 200000000 250000000 400000000 500000000 time(ms)
* 50000000: 0 0 0 0 0 0 0 1 144
62500000: 0 0 0 0 0 0 0 0 0
100000000: 0 0 0 0 0 0 0 9 524
125000000: 0 0 9 0 0 0 0 3 2544
200000000: 0 0 0 11 0 0 0 46 3304
250000000: 1 0 0 0 33 0 0 0 7496
400000000: 0 0 0 0 16 19 0 0 2024
500000000: 1 0 0 1 8 15 35 0 4032
Total transition : 208
Cheers,
Biju
