Hi Rob, On Fri, Sep 02, 2022 at 06:21:50PM +0200, Robert Foss wrote: > On Fri, 2 Sept 2022 at 17:39, Chris Morgan <macroalpha82@xxxxxxxxx> wrote: > > > > From: Chris Morgan <macromorgan@xxxxxxxxxxx> > > > > This series adds the ability to set the byteswap order in the chrontel > > ch7033 driver via an optional devicetree node. This is necessary > > because the HDMI DIP of the NTC CHIP requires a byteswap order that > > differs from the default value of the driver. > > > > Changes from V1: > > > > - Updated devicetree documentation to be easier to understand. > > > > Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx> > > > > Chris Morgan (2): > > dt-bindings: Add byteswap order to chrontel ch7033 > > drm/bridge: chrontel-ch7033: Add byteswap order setting > > > > .../bindings/display/bridge/chrontel,ch7033.yaml | 13 +++++++++++++ > > drivers/gpu/drm/bridge/chrontel-ch7033.c | 15 +++++++++++++-- > > 2 files changed, 26 insertions(+), 2 deletions(-) > > Applied to drm-misc-next. I've just reviewed the series, and I don't think this is right. Patch 2/2 has a small issue that could be fixed on top, but more importantly, I don't think this belongs to DT. See the reply to 1/2. -- Regards, Laurent Pinchart
