From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> This controller is present on several mediatek hardware. Currently mt8195 and mt8395 have this controller without a functional difference, so only one compatible field is added. The controller can have two forms, as a normal display port and as an embedded display port. Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx> Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- .../display/mediatek/mediatek,dp.yaml | 116 ++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml new file mode 100644 index 000000000000..ff781f2174a0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Display Port Controller + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx> + - Jitao shi <jitao.shi@xxxxxxxxxxxx> + +description: | + MediaTek DP and eDP are different hardwares and there are some features + which are not supported for eDP. For example, audio is not supported for + eDP. Therefore, we need to use two different compatibles to describe them. + In addition, We just need to enable the power domain of DP, so the clock + of DP is generated by itself and we are not using other PLL to generate + clocks. + +properties: + compatible: + enum: + - mediatek,mt8195-dp-tx + - mediatek,mt8195-edp-tx + + reg: + maxItems: 1 + + nvmem-cells: + maxItems: 1 + description: efuse data for display port calibration + + nvmem-cell-names: + const: dp_calibration_data + + power-domains: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the controller, usually dp_intf + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Output endpoint of the controller + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + description: | + number of lanes supported by the hardware. + The possible values: + 0 - For 1 lane enabled in IP. + 0 1 - For 2 lanes enabled in IP. + 0 1 2 3 - For 4 lanes enabled in IP. + minItems: 1 + maxItems: 4 + required: + - data-lanes + + required: + - port@0 + - port@1 + + max-linkrate-mhz: + enum: [ 1620, 2700, 5400, 8100 ] + description: maximum link rate supported by the hardware. + +required: + - compatible + - reg + - interrupts + - ports + - max-linkrate-mhz + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt8195-power.h> + dptx@1c600000 { + compatible = "mediatek,mt8195-dp-tx"; + reg = <0x1c600000 0x8000>; + power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>; + max-linkrate-mhz = <8100>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dptx_in: endpoint { + remote-endpoint = <&dp_intf0_out>; + }; + }; + port@1 { + reg = <1>; + dptx_out: endpoint { + data-lanes = <0 1 2 3>; + }; + }; + }; + }; -- 2.18.0
